munemunk3y
Cadet
- Joined
- Jul 9, 2020
- Messages
- 1
Hi all,
New here! trying to setup my first FreeNAS with a couple of NetApp disk shelves. Using "NetApp 111-00341+F2 4-Port HBA SAS PCIe Controller". When i run lspci -v i see this:
I am not seeing any drives. I should see 48 disks but i am only seeing my bootdisk / USB drive. Any pointers will be greatly appreciated.
New here! trying to setup my first FreeNAS with a couple of NetApp disk shelves. Using "NetApp 111-00341+F2 4-Port HBA SAS PCIe Controller". When i run lspci -v i see this:
04:00.0 Serial Attached SCSI controller: PMC-Sierra Inc. Device 8001 (rev 05)
Flags: bus master, fast devsel, latency 0, IRQ 17
Memory at df430000 (64-bit, non-prefetchable)
Memory at df420000 (64-bit, non-prefetchable)
Memory at df410000 (32-bit, non-prefetchable)
Memory at df400000 (32-bit, non-prefetchable)
Expansion ROM at df300000 [disabled]
Capabilities: [40] Power Management version 3
Capabilities: [50] MSI: Enable- Count=1/32 Maskable- 64bit+
Capabilities: [70] Express Endpoint, MSI 00
Capabilities: [ac] MSI-X: Enable+ Count=16 Masked-
Capabilities: [100] Advanced Error Reporting
05:00.0 Serial Attached SCSI controller: PMC-Sierra Inc. Device 8001 (rev 05)
Flags: bus master, fast devsel, latency 0, IRQ 16
Memory at df230000 (64-bit, non-prefetchable)
Memory at df220000 (64-bit, non-prefetchable)
Memory at df210000 (32-bit, non-prefetchable)
Memory at df200000 (32-bit, non-prefetchable)
Expansion ROM at df100000 [disabled]
Capabilities: [40] Power Management version 3
Capabilities: [50] MSI: Enable- Count=1/32 Maskable- 64bit+
Capabilities: [70] Express Endpoint, MSI 00
Memory at df200000 (32-bit, non-prefetchable)
Expansion ROM at df100000 [disabled]
I am not seeing any drives. I should see 48 disks but i am only seeing my bootdisk / USB drive. Any pointers will be greatly appreciated.