mangelot
Dabbler
- Joined
- May 24, 2016
- Messages
- 11
Hello,
I've setup an freenas 11 (latest) server with FC target..
1x Intel SR25ALLRX (2x Xeon 5420, 64GB RAM maximum memory & 6x Sata2 bays)
2x USB 32GB sandisk - Mirrored (freenas boot)
6x 2TB SATA3 128MB cache WD Black RE4 WD2004FBYZ - Mirror
2x PCIe LSI Warpdrive (4x100GB disk each..)
(2x 3 drives stripe L2ARC - 2x 1 drive mirrored SLOG)
1x Qlogic 2564 (4x 8Gbps ports fiber channel target)
This is my current setup:
mirror-0
WD Black RE4 (on Sata2)
WD Black RE4 (on Sata2)
mirror-1
WD Black RE4 (on Sata2)
WD Black RE4 (on Sata2)
mirror-2
WD Black RE4 (on Sata2)
WD Black RE4 (on Sata2)
logs
mirror-3
first PCIe LSI Warpdrive
second PCIe LSI Warpdrive
cache
first PCIe LSI Warpdrive
first PCIe LSI Warpdrive
first PCIe LSI Warpdrive
second PCIe LSI Warpdrive
second PCIe LSI Warpdrive
second PCIe LSI Warpdrive
Connected 1x 8 Gbps port Fiberchannel (no MPIO/Mulitpath) and tested with Bonnie++ with resulting output:
Without SLOG
Sequential Output 484784 K/sec
Sequential Input 409746 K/sec
With SLOG
Sequential Output 606975 K/sec
Sequential Input 427829 K/sec
My question is this performance acceptable? or can I get more performance with some tuning (tunables)?
I've setup an freenas 11 (latest) server with FC target..
1x Intel SR25ALLRX (2x Xeon 5420, 64GB RAM maximum memory & 6x Sata2 bays)
2x USB 32GB sandisk - Mirrored (freenas boot)
6x 2TB SATA3 128MB cache WD Black RE4 WD2004FBYZ - Mirror
2x PCIe LSI Warpdrive (4x100GB disk each..)
(2x 3 drives stripe L2ARC - 2x 1 drive mirrored SLOG)
1x Qlogic 2564 (4x 8Gbps ports fiber channel target)
This is my current setup:
mirror-0
WD Black RE4 (on Sata2)
WD Black RE4 (on Sata2)
mirror-1
WD Black RE4 (on Sata2)
WD Black RE4 (on Sata2)
mirror-2
WD Black RE4 (on Sata2)
WD Black RE4 (on Sata2)
logs
mirror-3
first PCIe LSI Warpdrive
second PCIe LSI Warpdrive
cache
first PCIe LSI Warpdrive
first PCIe LSI Warpdrive
first PCIe LSI Warpdrive
second PCIe LSI Warpdrive
second PCIe LSI Warpdrive
second PCIe LSI Warpdrive
Connected 1x 8 Gbps port Fiberchannel (no MPIO/Mulitpath) and tested with Bonnie++ with resulting output:
Without SLOG
Sequential Output 484784 K/sec
Sequential Input 409746 K/sec
With SLOG
Sequential Output 606975 K/sec
Sequential Input 427829 K/sec
My question is this performance acceptable? or can I get more performance with some tuning (tunables)?
Last edited: