MatthewSteinhoff
Guru
- Joined
- Feb 2, 2016
- Messages
- 574
We have 12, 3TB SAS drives in an external HP SAS array that were just plugged into (SAS9207-4i4e) our newish FreeNAS-9.10 server. These were previously on a FreeNAS-9.3 server as a single ZFS volume group. They have security video on them but that data is rolling and more or less obsolete so we're not especially concerned about keeping the volume group when adding it to the new server.
FreeNAS sees all the drives from the command line but not the GUI. The error we see is 'GEOM: multipath/diskNN corrupt or invalid GPT detected' and 'GEOM: multipath/diskNN: GPT rejected -- may not be recoverable.'. (Logs below if you care.)
Running 'zpool status' and 'zpool import' doesn't show any evidence of the previous volume group.
I suspect we can dd if=/dev/zero each of the drives (the raw drive or the multipath?) and then start from scratch. Aside from being time consuming and inelegant, we're wondering if there is a more correct way or efficient way to prepare the disks for reuse in FreeNAS.
Cheers,
Matt
FreeNAS sees all the drives from the command line but not the GUI. The error we see is 'GEOM: multipath/diskNN corrupt or invalid GPT detected' and 'GEOM: multipath/diskNN: GPT rejected -- may not be recoverable.'. (Logs below if you care.)
Running 'zpool status' and 'zpool import' doesn't show any evidence of the previous volume group.
I suspect we can dd if=/dev/zero each of the drives (the raw drive or the multipath?) and then start from scratch. Aside from being time consuming and inelegant, we're wondering if there is a more correct way or efficient way to prepare the disks for reuse in FreeNAS.
Cheers,
Matt
Code:
ses0 at mps0 bus 0 scbus0 target 29 lun 0 ses0: <HP D2600 SAS AJ940A 0103> Fixed Enclosure Services SPC-3 SCSI device ses0: Serial Number CN8035P2L3 ses0: 600.000MB/s transfers ses0: Command Queueing enabled ses0: SCSI-3 ENC Device da17 at mps0 bus 0 scbus0 target 21 lun 0 da17: <HITACHI HUS723030ALS640 A120> Fixed Direct Access SPC-4 SCSI device da17: Serial Number YHJ7M2JD da17: 600.000MB/s transfers da17: Command Queueing enabled da17: 2861588MB (5860533168 512 byte sectors) da18 at mps0 bus 0 scbus0 target 20 lun 0 da18: <HITACHI HUS723030ALS640 A120> Fixed Direct Access SPC-4 SCSI device da18: Serial Number YHJ8WYGD da18: 600.000MB/s transfers da18: Command Queueing enabled da18: 2861588MB (5860533168 512 byte sectors) da15 at mps0 bus 0 scbus0 target 18 lun 0 da15: <HITACHI HUS723030ALS640 A222> Fixed Direct Access SPC-4 SCSI device da15: Serial Number YHKA5RHG da15: 600.000MB/s transfers da15: Command Queueing enabled da15: 2861588MB (5860533168 512 byte sectors) da20 at mps0 bus 0 scbus0 target 22 lun 0 da20: <HITACHI HUS723030ALS640 A120> Fixed Direct Access SPC-4 SCSI device da20: Serial Number YHJ6XEJD da20: 600.000MB/s transfers da20: Command Queueing enabled da20: 2861588MB (5860533168 512 byte sectors) da16 at mps0 bus 0 scbus0 target 19 lun 0 da16: <HITACHI HUS723030ALS640 A120> Fixed Direct Access SPC-4 SCSI device da16: Serial Number YHJ7DJND da16: 600.000MB/s transfers da16: Command Queueing enabled da16: 2861588MB (5860533168 512 byte sectors) da14 at mps0 bus 0 scbus0 target 17 lun 0 da14: <HITACHI HUS723030ALS640 A222> Fixed Direct Access SPC-4 SCSI device da14: Serial Number YHKAMUDG da14: 600.000MB/s transfers da14: Command Queueing enabled da14: 2861588MB (5860533168 512 byte sectors) da24 at mps0 bus 0 scbus0 target 26 lun 0 da24: <HITACHI HUS723030ALS640 A120> Fixed Direct Access SPC-4 SCSI device da24: Serial Number YHJ7TAUD da24: 600.000MB/s transfers da24: Command Queueing enabled da24: 2861588MB (5860533168 512 byte sectors) da19 at mps0 bus 0 scbus0 target 23 lun 0 da19: <HITACHI HUS723030ALS640 A120> Fixed Direct Access SPC-4 SCSI device da19: Serial Number YHJ8XNXD da19: 600.000MB/s transfers da19: Command Queueing enabled da19: 2861588MB (5860533168 512 byte sectors) GEOM_MULTIPATH: disk2 created da25 at mps0 bus 0 scbus0 target 28 lun 0 da25: <HITACHI HUS723030ALS640 A120> Fixed Direct Access SPC-4 SCSI device da25: Serial Number YHJ6YL9D da25: 600.000MB/s transfers da25: Command Queueing enabled da25: 2861588MB (5860533168 512 byte sectors) GEOM_MULTIPATH: da14 added to disk2 GEOM_MULTIPATH: da14 is now active path in disk2 da21 at mps0 bus 0 scbus0 target 25 lun 0 da21: <HITACHI HUS723030ALS640 A120> Fixed Direct Access SPC-4 SCSI device da21: Serial Number YHJ7RYGD da21: 600.000MB/s transfers da21: Command Queueing enabled da21: 2861588MB (5860533168 512 byte sectors) GEOM: multipath/disk2: corrupt or invalid GPT detected. GEOM: multipath/disk2: GPT rejected -- may not be recoverable. GEOM_MULTIPATH: disk5 created GEOM_MULTIPATH: da15 added to disk5 GEOM_MULTIPATH: da15 is now active path in disk5 GEOM_MULTIPATH: disk8 created GEOM_MULTIPATH: da16 added to disk8 GEOM_MULTIPATH: da16 is now active path in disk8 GEOM_MULTIPATH: disk14 created GEOM_MULTIPATH: da17 added to disk14 GEOM_MULTIPATH: da17 is now active path in disk14 GEOM_MULTIPATH: disk10 created GEOM_MULTIPATH: da18 added to disk10 GEOM_MULTIPATH: da18 is now active path in disk10 GEOM_MULTIPATH: disk20 created GEOM_MULTIPATH: da19 added to disk20 GEOM_MULTIPATH: da19 is now active path in disk20 GEOM_MULTIPATH: disk19 created GEOM_MULTIPATH: da20 added to disk19 GEOM_MULTIPATH: da20 is now active path in disk19 GEOM_MULTIPATH: disk22 created GEOM_MULTIPATH: da21 added to disk22 GEOM_MULTIPATH: da21 is now active path in disk22 da22 at mps0 bus 0 scbus0 target 24 lun 0 da22: <HITACHI HUS723030ALS640 A222> Fixed Direct Access SPC-4 SCSI device da22: Serial Number YHKAG8DG da22: 600.000MB/s transfers da22: Command Queueing enabled da22: 2861588MB (5860533168 512 byte sectors) GEOM_MULTIPATH: disk21 created da23 at mps0 bus 0 scbus0 target 27 lun 0 da23: <HITACHI HUS723030ALS640 A222> Fixed Direct Access SPC-4 SCSI device da23: Serial Number YHKD6SEG da23: 600.000MB/s transfers da23: Command Queueing enabled da23: 2861588MB (5860533168 512 byte sectors) GEOM_MULTIPATH: da22 added to disk21 GEOM_MULTIPATH: da22 is now active path in disk21 GEOM_MULTIPATH: disk24 created GEOM_MULTIPATH: da23 added to disk24 GEOM_MULTIPATH: da23 is now active path in disk24 GEOM_MULTIPATH: disk23 created GEOM_MULTIPATH: da24 added to disk23 GEOM_MULTIPATH: da24 is now active path in disk23 GEOM_MULTIPATH: disk25 created GEOM_MULTIPATH: da25 added to disk25 GEOM_MULTIPATH: da25 is now active path in disk25 GEOM: multipath/disk5: corrupt or invalid GPT detected. GEOM: multipath/disk5: GPT rejected -- may not be recoverable. GEOM: multipath/disk8: corrupt or invalid GPT detected. GEOM: multipath/disk8: GPT rejected -- may not be recoverable. GEOM: multipath/disk14: corrupt or invalid GPT detected. GEOM: multipath/disk14: GPT rejected -- may not be recoverable. GEOM: multipath/disk10: corrupt or invalid GPT detected. GEOM: multipath/disk10: GPT rejected -- may not be recoverable. GEOM: multipath/disk20: corrupt or invalid GPT detected. GEOM: multipath/disk20: GPT rejected -- may not be recoverable. GEOM: multipath/disk19: corrupt or invalid GPT detected. GEOM: multipath/disk19: GPT rejected -- may not be recoverable. GEOM: multipath/disk22: corrupt or invalid GPT detected. GEOM: multipath/disk22: GPT rejected -- may not be recoverable. GEOM: multipath/disk21: corrupt or invalid GPT detected. GEOM: multipath/disk21: GPT rejected -- may not be recoverable. GEOM: multipath/disk24: corrupt or invalid GPT detected. GEOM: multipath/disk24: GPT rejected -- may not be recoverable. GEOM: multipath/disk23: corrupt or invalid GPT detected. GEOM: multipath/disk23: GPT rejected -- may not be recoverable. GEOM: multipath/disk25: corrupt or invalid GPT detected. GEOM: multipath/disk25: GPT rejected -- may not be recoverable.