This is a new installation of Plex on FreeNAS 11.2. I have most of plex working but when I create a new folder in Plex for say "TV Shows", I am unable to find the folder for tv shows on the mapped drive on my win10 machine.
Jails have the following mount points
Source /mnt/DataPool/PlexData
Destination /mnt/DataPool/iocage/jails/plex/root/media
The smb plexshare is /mnt/DataPool/PlexData I have mapped this on my Win10 machine and no folders show up which also means that I can not move my media folders to this share so they will be available in Plex.
I have no doubt that I have done something wrong but I can't figure is out.
I am happy to answer any questions with details that would help to figure this out. On my 11.1-U6 system I had everything working perfect. Since I upgraded my system with a better motherboard and 11.2 Release, I am unable to figure this out. I have read through the forum as well as the users manual with no luck at all. Obviously, I have screwed up and need help. Thanks in advance.
This is my full system.
FreeNAS Version: 11.2-Release
Case: Old case for now. Not sure what case to get.
Power Supply: Seasonic Focus 550 Gold
Motherboard: SuperMicro X9SRL-F, LGA 2011, IPMI
Processor: Intel Xeon E5-2650 V2, 2.6GHz 8Core (16thread)
Memory: 64GB of 8GB sticks Samsung brand PC3L-12800R DDR3-1600MHz Ram, ECC Registered
HBA: LSI 9211-8i IT Mode 6Gbps SAS HBA
Boot Pool: 2X Intel 320 Series 160 GB SATA 3.0 Gb-s 2.5-Inch SSD Mirrored
Media Pool: 1 vdev 5 X 8 TB Western Digital Reds in Raid Z2
Backup Pool: 1 vdev 2 X 3 TB Western Digital Reds in Raid Z1
Plex Jail: 1 vdev 1X Samsung SSD 500GB
Also have a Mellanox 10GB Connectx2 Between Server and Desktop PC
Jails have the following mount points
Source /mnt/DataPool/PlexData
Destination /mnt/DataPool/iocage/jails/plex/root/media
The smb plexshare is /mnt/DataPool/PlexData I have mapped this on my Win10 machine and no folders show up which also means that I can not move my media folders to this share so they will be available in Plex.
I have no doubt that I have done something wrong but I can't figure is out.
I am happy to answer any questions with details that would help to figure this out. On my 11.1-U6 system I had everything working perfect. Since I upgraded my system with a better motherboard and 11.2 Release, I am unable to figure this out. I have read through the forum as well as the users manual with no luck at all. Obviously, I have screwed up and need help. Thanks in advance.
This is my full system.
FreeNAS Version: 11.2-Release
Case: Old case for now. Not sure what case to get.
Power Supply: Seasonic Focus 550 Gold
Motherboard: SuperMicro X9SRL-F, LGA 2011, IPMI
Processor: Intel Xeon E5-2650 V2, 2.6GHz 8Core (16thread)
Memory: 64GB of 8GB sticks Samsung brand PC3L-12800R DDR3-1600MHz Ram, ECC Registered
HBA: LSI 9211-8i IT Mode 6Gbps SAS HBA
Boot Pool: 2X Intel 320 Series 160 GB SATA 3.0 Gb-s 2.5-Inch SSD Mirrored
Media Pool: 1 vdev 5 X 8 TB Western Digital Reds in Raid Z2
Backup Pool: 1 vdev 2 X 3 TB Western Digital Reds in Raid Z1
Plex Jail: 1 vdev 1X Samsung SSD 500GB
Also have a Mellanox 10GB Connectx2 Between Server and Desktop PC
