Blueshadow
Cadet
- Joined
- Nov 7, 2019
- Messages
- 5
Hi
Trying to setup Freenas to connect to a VMWARE ESX box using ISCSI but run into an issue with the configuration of the network.
Now I have tested all of the network ports on the Freenas by selecting them to be DHCP and all of them get an IP on our internal network of 10.x.x.x subnet 255.0.0.0
Internal network is using 10.x.x.x 255.0.0.0 and I can set an interface on this subnet and it works fine.
But when I set an interface to 192.168.31.x with subnet mask of 255.255.255.0 the interface comes up with no carrier
It also does not respond to a ping.
Was wondering what I am doing wrong.
I have tried to delete all interfaces .
I have also connected the configured network cards to a dumb switch as well.
Trying to setup Freenas to connect to a VMWARE ESX box using ISCSI but run into an issue with the configuration of the network.
Now I have tested all of the network ports on the Freenas by selecting them to be DHCP and all of them get an IP on our internal network of 10.x.x.x subnet 255.0.0.0
Internal network is using 10.x.x.x 255.0.0.0 and I can set an interface on this subnet and it works fine.
But when I set an interface to 192.168.31.x with subnet mask of 255.255.255.0 the interface comes up with no carrier
It also does not respond to a ping.
Was wondering what I am doing wrong.
I have tried to delete all interfaces .
I have also connected the configured network cards to a dumb switch as well.