SOLVED Can't import my pool...

[Kalli]

Hi guys,

I had exported my pool using zpool export and reimported it without any errors. I had rebooted FreeNAS afterwards and now I cannot see any volume under the storage section of the Web GUI.
Going to import volumes nothing is being listed as importable. You can find the zpool status output below

Code:

[root@freenas ~]# zpool status -v																								   
  pool: Storage																													 
state: ONLINE																													 
  scan: scrub repaired 0 in 3h57m with 0 errors on Sun Aug  6 03:57:31 2017														 
config:																															 
																																	
		NAME											STATE	 READ WRITE CKSUM												 
		Storage										 ONLINE	   0	 0	 0												 
		  raidz2-0									  ONLINE	   0	 0	 0												 
			gptid/b47bd3c2-9b1d-11e3-8296-ac220b4f4411  ONLINE	   0	 0	 0												 
			gptid/b548c811-9b1d-11e3-8296-ac220b4f4411  ONLINE	   0	 0	 0												 
			gptid/b61c74d2-9b1d-11e3-8296-ac220b4f4411  ONLINE	   0	 0	 0												 
			gptid/b6e75c0c-9b1d-11e3-8296-ac220b4f4411  ONLINE	   0	 0	 0												 
			gptid/b7b7f2e4-9b1d-11e3-8296-ac220b4f4411  ONLINE	   0	 0	 0												 
			gptid/b86d7fa0-9b1d-11e3-8296-ac220b4f4411  ONLINE	   0	 0	 0												 
																																	
errors: No known data errors																										
																																	
  pool: freenas-boot																												
state: ONLINE																													 
  scan: scrub repaired 0 in 0h4m with 0 errors on Mon Aug 21 03:49:21 2017														 
config:																															 
																																	
		NAME		STATE	 READ WRITE CKSUM																					 
		freenas-boot  ONLINE	   0	 0	 0																					
		  da0p2	 ONLINE	   0	 0	 0																					 
																																	
errors: No known data errors

 

[BigDave]

Of the zpool status reported above, your pool is online and there would be
no pool to import. Try clearing your browser cache, of that does not work,
reboot FreeNAS.

 

[Kalli]

Hello BigDave,

Thanks for reaching out. I've done as you suggested but the problem persists.

 

[Kalli]

Well I found the fix. Turns out doing a 'zpool export', rebooting FreeNAS showed me my pool on the GUI during Volume Import wizard.
Thanks again for your input!