Cannot Install Plugins, Cannot Create Jails, New Installs 9.2/9.3 Neither Work

[Krystm]

So, I have a friend that told me all about all the awesome things that you can do with plugins on FreeNAS which got me convinced to actually upgrade my current FreeNAS system to accommodate. I have been running it for a while version 8.x then 9.1 and finally 9.2. However, regardless of what version I install and run I cannot, create jails, install plugins regardless of doing uploads or downloading though the plugins menu.

I have tried everything I could find in searches but nothing seems to get it and none of the issues are quite like mine. These are all on FRESH installs and not importing previous configurations. Only thing imported is the ZFS drives. Everything else seems to work just fine, I can import the ZFS, setup CIFS and access with 0 issues.

System Specs:
8 GB SanDisk USB for FreeNAS
Intel Xeon 1220V2
AsRock Z75PRO3
24GB of DDR3
3x 640 GB WD HD Blue in ZFS
2x 500 GB Seagate 7200.11 in RAID0
1x 3TB Toshiba as Backup

This is all installed on 9.3 STABLE as of today's release 5/10/15

There are 2 major issues that I can find.

#1 (Most Currently) When I try to do a plug-in install the download initiates, gets to 99% and just hangs. IF and this is a BIG IF, it happens to make it past that, then it gets to "Creating Template" which then also hangs at 99% and does not get past that.

#2 This is kind of a weird one, but if I try to do an install of one plugin and it hangs too long I close it and try another. The GUI then opens the prompt, I click Install and it goes right into trying to create the template without any downloading etc. So it's like it's trying to pickup where I stopped the other install.

Jails have the same effect, Try to create it, it counts up while creating gets to the last 1% and hangs.

Also these issues seem to happen regardless of where I create the Jail. The 2x 500s is currently what I am using as they are wiped and cleared, I can destroy and rebuild if necessary. The 3x 640s ZFS have a lot of data on them so would like to not have to do anything with that, and the 3TB has a copy of the 3x 640 ZFS data just in case.

Any help would be massively appreciated, I can run whatever commands you would like to see. I don't know a ton of linux but have enough to kinda get around so any commands please try to be verbatim as much as possible.

Some possible help from commands I have run trying to fix it:

Code:

[root@freenas ~]# warden template list                                          
Jail Templates:
------------------------------
pluginjail - FreeBSD 9.3 (amd64)
standard - FreeBSD 9.3 (amd64)

[root@freenas] ~# zfs list
NAME                                                       USED  AVAIL  REFER  MOUNTPOINT
BACKUP                                                    1.10T  1.54T  1.10T  /mnt/BACKUP
Download                                                  2.54G   889G  20.5M  /mnt/Download
Download/.system                                          2.35M   889G   320K  legacy
Download/.system/cores                                     804K   889G   804K  legacy
Download/.system/rrd-cd1fc29ce94d4a81a24df77359252261       96K   889G    96K  legacy
Download/.system/rrd-ef0328204f144ac28e63fb17192f40d3       96K   889G    96K  legacy
Download/.system/samba4                                    332K   889G   332K  legacy
Download/.system/syslog-cd1fc29ce94d4a81a24df77359252261   240K   889G   240K  legacy
Download/.system/syslog-ef0328204f144ac28e63fb17192f40d3   516K   889G   516K  legacy
Download/.warden-template-pluginjail                       449M   889G   449M  /mnt/Download/.warden-template-pluginjail
Download/jails                                            2.07G   889G  59.3M  /mnt/Download/jails
Download/jails/.warden-template-pluginjail                 449M   889G   449M  /mnt/Download/jails/.warden-template-pluginjail
Download/jails/.warden-template-standard                  1.58G   889G  1.58G  /mnt/Download/jails/.warden-template-standard
Storage                                                    522G   624G   522G  /mnt/Storage
Storage/.system                                            116M   624G  11.3M  /mnt/Storage/.system
Storage/.system/cores                                     36.0M   624G  36.0M  /mnt/Storage/.system/cores
Storage/.system/perftest                                  30.0K   624G  30.0K  /mnt/Storage/.system/perftest
Storage/.system/rrd-cd1fc29ce94d4a81a24df77359252261      28.0K   624G  28.0K  /mnt/Storage/.system/rrd-cd1fc29ce94d4a81a24df77359252261
Storage/.system/samba4                                    3.33M   624G  3.33M  /mnt/Storage/.system/samba4
Storage/.system/syslog-cd1fc29ce94d4a81a24df77359252261   65.5M   624G  65.5M  /mnt/Storage/.system/syslog-cd1fc29ce94d4a81a24df77359252261
freenas-boot                                               517M  6.70G    31K  none
freenas-boot/ROOT                                          510M  6.70G    25K  none
freenas-boot/ROOT/Initial-Install                            1K  6.70G   506M  legacy
freenas-boot/ROOT/Wizard-2015-05-10_19:37:40                 1K  6.70G   507M  legacy
freenas-boot/ROOT/default                                  510M  6.70G   507M  legacy
freenas-boot/grub                                         6.81M  6.70G  6.79M  legacy

 

[Krystm]

Here is what happens when I try to install a plugin and just let it go:

Code:

May 11 09:33:13 freenas manage.py: [common.pipesubr:59] Popen()ing: /sbin/ping -q -t 2 -o 10.14.1.3
May 11 09:33:17 freenas warden: Building new Jail... Please wait...
May 11 09:33:17 freenas warden: zfs clone Download/jails/.warden-template-pluginjail@clean Download/jails/sickbeard_1
May 11 09:33:17 freenas warden: ERROR: Failed creating clean ZFS base clone
May 11 09:33:17 freenas manage.py: [middleware.exceptions:38] [MiddlewareError: [Errno 2] No such file or directory: u'/mnt/Download/jails/sickbeard_1/.plugins/PLUGIN']

[root@freenas] ~# pciconf -lv
hostb0@pci0:0:0:0:      class=0x060000 card=0x01581849 chip=0x01588086 rev=0x09 hdr=0x00
    vendor     = 'Intel Corporation'
    device     = 'Ivy Bridge DRAM Controller'
    class      = bridge
    subclass   = HOST-PCI
none0@pci0:0:22:0:      class=0x078000 card=0x1e3a1849 chip=0x1e3a8086 rev=0x04 hdr=0x00
    vendor     = 'Intel Corporation'
    device     = 'Panther Point MEI Controller'
    class      = simple comms
ehci0@pci0:0:26:0:      class=0x0c0320 card=0x1e2d1849 chip=0x1e2d8086 rev=0x04 hdr=0x00
    vendor     = 'Intel Corporation'
    device     = 'Panther Point USB Enhanced Host Controller'
    class      = serial bus
    subclass   = USB
none1@pci0:0:27:0:      class=0x040300 card=0x78921849 chip=0x1e208086 rev=0x04 hdr=0x00
    vendor     = 'Intel Corporation'
    device     = 'Panther Point High Definition Audio Controller'
    class      = multimedia
    subclass   = HDA
pcib1@pci0:0:28:0:      class=0x060400 card=0x1e101849 chip=0x1e108086 rev=0xc4 hdr=0x01
    vendor     = 'Intel Corporation'
    device     = 'Panther Point PCI Express Root Port 1'
    class      = bridge
    subclass   = PCI-PCI
pcib2@pci0:0:28:4:      class=0x060401 card=0x244e1849 chip=0x244e8086 rev=0xc4 hdr=0x01
    vendor     = 'Intel Corporation'
    device     = '82801 PCI Bridge'
    class      = bridge
    subclass   = PCI-PCI
pcib5@pci0:0:28:5:      class=0x060400 card=0x1e1a1849 chip=0x1e1a8086 rev=0xc4 hdr=0x01
    vendor     = 'Intel Corporation'
    device     = 'Panther Point PCI Express Root Port 6'
    class      = bridge
    subclass   = PCI-PCI
ehci1@pci0:0:29:0:      class=0x0c0320 card=0x1e261849 chip=0x1e268086 rev=0x04 hdr=0x00
    vendor     = 'Intel Corporation'
    device     = 'Panther Point USB Enhanced Host Controller'
    class      = serial bus
    subclass   = USB
isab0@pci0:0:31:0:      class=0x060100 card=0x1e461849 chip=0x1e468086 rev=0x04 hdr=0x00
    vendor     = 'Intel Corporation'
    device     = 'Panther Point LPC Controller'
    class      = bridge
    subclass   = PCI-ISA
ahci0@pci0:0:31:2:      class=0x010601 card=0x1e021849 chip=0x1e028086 rev=0x04 hdr=0x00
    vendor     = 'Intel Corporation'
    device     = 'Panther Point 6 port SATA AHCI Controller'
    class      = mass storage
    subclass   = SATA
none2@pci0:0:31:3:      class=0x0c0500 card=0x1e221849 chip=0x1e228086 rev=0x04 hdr=0x00
    vendor     = 'Intel Corporation'
    device     = 'Panther Point SMBus Controller'
    class      = serial bus
    subclass   = SMBus
pcib3@pci0:2:0:0:       class=0x060401 card=0x10801849 chip=0x10801b21 rev=0x03 hdr=0x01
    vendor     = 'ASMedia Technology Inc.'
    class      = bridge
    subclass   = PCI-PCI
pcib4@pci0:3:0:0:       class=0x060400 card=0x00000000 chip=0x811210b5 rev=0xaa hdr=0x01
    vendor     = 'PLX Technology, Inc.'
    device     = 'PEX8112 x1 Lane PCI Express-to-PCI Bridge'
    class      = bridge
    subclass   = PCI-PCI
vgapci0@pci0:4:0:0:     class=0x030000 card=0x0879196e chip=0x10c310de rev=0xa2 hdr=0x00
    vendor     = 'nVidia Corporation'
    device     = 'GT218 [GeForce 8400 GS]'
    class      = display
    subclass   = VGA
none3@pci0:4:0:1:       class=0x040300 card=0x0879196e chip=0x0be310de rev=0xa1 hdr=0x00
    vendor     = 'nVidia Corporation'
    device     = 'High Definition Audio Controller'
    class      = multimedia
    subclass   = HDA
re0@pci0:5:0:0: class=0x020000 card=0x81681849 chip=0x816810ec rev=0x06 hdr=0x00
    vendor     = 'Realtek Semiconductor Co., Ltd.'
    device     = 'RTL8111/8168B PCI Express Gigabit Ethernet controller'
    class      = network
    subclass   = ethernet

 

[dlavigne]

Did you figure this out?

 

[Krystm]

Sure DIDN'T ... I tried SO many different things, Removed RAM, Tested RAM, Differnet Flash Drives. I tried it all. The ONLY thing I could figure is maybe something with my hardware. So, in the end what I ended up doing was I installed ESXI 6, Installed FREENAS 9.3 and A Win 7 Box.

So the FreeNAS actually works fine as far as Setting up and doing File Serving, ZFS, rysnc for backup etc. But as my problem stated no plugins, No Jails etc. So That is all it gets used for (ZFS and Rsync Backups). The Win7 Got all the other software I wanted to do plugins for, SabNZB, Sickbeard etc and I have them running as services to the shared drive off the FreeNAS and everything is great now..... not quite how I wanted to do it but it seems to work pretty flawlessly. Pretty disappointed about the whole thing, but then again I may be running un-tested hardware etc. So just working with what I got.

 

[dlavigne]

I know there are some outstanding bugs on jails/plugins, so you may be getting bit by one of those. Weird that it doesn't work on either 9.2 or 9.3 though. Only thing I can think of is some weird network setting is messing it up.