Hello.
I have this server running 24/7 for about 6 years now:
FreeNAS-11.1-U7
XEON E3-1220 V3
SUPERMICRO SERVER 826E16
Motherboard MBD-X10SLM
16GB Ram
LSI SAS3108
Started with 7x4TB in raidz2
then added 2x8tb mirror to the pool
and then added more 2x8tb to the same pool
I also have a 500gb cache drive
2 weeks ago I got an email about a failing 4tb hard drive I confirmed it with smart and ordered replacement. Then I proceeded to replace the drive according to instructions I put bad drive offline, shutdown the server and replaced the drive. I took the opportunity to clean the dust of the drives took them of their slots and reinsert them.
After I power up the system I go to the gui and replaced the drive and it started resilvering. all good so far but then an 8tb drive started giving this errors and UDMA_CRC_Error_Count started increasing.
It looks like bad connection. but I was afraid to shutdown during resilver so I let it run. I just want to know the best course of action right now because zpool status says to Wait for the resilver to complete.:
I did a short smart test but I didn't do a long because it might slow the resilver a lot.
thanks.
I have this server running 24/7 for about 6 years now:
FreeNAS-11.1-U7
XEON E3-1220 V3
SUPERMICRO SERVER 826E16
Motherboard MBD-X10SLM
16GB Ram
LSI SAS3108
Started with 7x4TB in raidz2
then added 2x8tb mirror to the pool
and then added more 2x8tb to the same pool
I also have a 500gb cache drive
2 weeks ago I got an email about a failing 4tb hard drive I confirmed it with smart and ordered replacement. Then I proceeded to replace the drive according to instructions I put bad drive offline, shutdown the server and replaced the drive. I took the opportunity to clean the dust of the drives took them of their slots and reinsert them.
After I power up the system I go to the gui and replaced the drive and it started resilvering. all good so far but then an 8tb drive started giving this errors and UDMA_CRC_Error_Count started increasing.
It looks like bad connection. but I was afraid to shutdown during resilver so I let it run. I just want to know the best course of action right now because zpool status says to Wait for the resilver to complete.:
Code:
pool: storage5 state: DEGRADED status: One or more devices is currently being resilvered. The pool will continue to function, possibly in a degraded state. action: Wait for the resilver to complete. scan: resilver in progress since Mon Jan 22 15:20:00 2024 21.1T scanned at 232M/s, 19.9T issued at 218M/s, 36.4T total 1.71T resilvered, 54.73% done, 0 days 21:58:30 to go config: NAME STATE READ WRITE CKSUM storage5 DEGRADED 0 0 0 raidz2-0 ONLINE 0 0 0 gptid/75123f50-9a37-11e7-a035-0cc47ac6de45 ONLINE 0 0 0 gptid/7627289d-9a37-11e7-a035-0cc47ac6de45 ONLINE 0 0 0 gptid/7778ae43-9a37-11e7-a035-0cc47ac6de45 ONLINE 0 0 0 gptid/78bb002c-9a37-11e7-a035-0cc47ac6de45 ONLINE 0 0 0 gptid/79e99291-9a37-11e7-a035-0cc47ac6de45 ONLINE 0 0 0 gptid/715d621c-b939-11ee-9c62-0cc47ac6de45 ONLINE 0 0 0 (resilvering) gptid/7c3546e8-9a37-11e7-a035-0cc47ac6de45 ONLINE 0 0 0 mirror-1 ONLINE 0 0 0 gptid/3b535bc9-d7ce-11ea-93e3-0cc47ac6de45 ONLINE 0 0 0 gptid/3bf74286-d7ce-11ea-93e3-0cc47ac6de45 ONLINE 0 0 0 mirror-2 DEGRADED 0 0 0 gptid/f6ada8d8-38c0-11ec-b8d2-0cc47ac6de45 DEGRADED 0 0 156 too many errors (resilvering) gptid/f749f2d1-38c0-11ec-b8d2-0cc47ac6de45 ONLINE 0 0 0 cache gptid/24313233-3fca-11eb-9a9d-0cc47ac6de45 ONLINE 0 0 0 errors: No known data errors
Code:
Jan 22 16:45:16 freenas (da3:mrsas0:0:3:0): WRITE(10). CDB: 2a 00 00 40 01 d8 00 00 08 00 Jan 22 16:45:16 freenas (da3:mrsas0:0:3:0): CAM status: SCSI Status Error Jan 22 16:45:16 freenas (da3:mrsas0:0:3:0): SCSI status: OK Jan 22 16:50:09 freenas smartd[6232]: Device: /dev/da3 [SAT], ATA error count increased from 231 to 1034 Jan 22 16:50:09 freenas smartd[6232]: Device: /dev/da3 [SAT], ATA error count increased from 231 to 1035 Jan 22 16:52:14 freenas ZFS: vdev state changed, pool_guid=17226110643858325054 vdev_guid=15474057923386265386 Jan 22 17:09:02 freenas (da3:mrsas0:0:3:0): READ(10). CDB: 28 00 47 ad 6d 88 00 01 00 00 Jan 22 17:09:02 freenas (da3:mrsas0:0:3:0): CAM status: SCSI Status Error Jan 22 17:09:02 freenas (da3:mrsas0:0:3:0): SCSI status: OK Jan 22 17:09:02 freenas (da3:mrsas0:0:3:0): READ(10). CDB: 28 00 47 ad 6f 88 00 01 00 00 Jan 22 17:09:02 freenas (da3:mrsas0:0:3:0): CAM status: SCSI Status Error Jan 22 17:09:02 freenas (da3:mrsas0:0:3:0): SCSI status: OK Jan 22 17:14:33 freenas (da3:mrsas0:0:3:0): READ(16). CDB: 88 00 00 00 00 03 87 7a 34 30 00 00 01 00 00 00 Jan 22 17:14:33 freenas (da3:mrsas0:0:3:0): CAM status: SCSI Status Error Jan 22 17:14:33 freenas (da3:mrsas0:0:3:0): SCSI status: OK Jan 22 17:16:47 freenas (da3:mrsas0:0:3:0): READ(10). CDB: 28 00 e7 ce f0 f0 00 01 00 00 Jan 22 17:16:47 freenas (da3:mrsas0:0:3:0): CAM status: SCSI Status Error Jan 22 17:16:47 freenas (da3:mrsas0:0:3:0): SCSI status: OK Jan 22 17:16:47 freenas (da3:mrsas0:0:3:0): READ(10). CDB: 28 00 e7 ce f1 f0 00 01 00 00 Jan 22 17:16:47 freenas (da3:mrsas0:0:3:0): CAM status: SCSI Status Error Jan 22 17:16:47 freenas (da3:mrsas0:0:3:0): SCSI status: OK Jan 22 17:17:37 freenas (da3:mrsas0:0:3:0): READ(10). CDB: 28 00 e0 05 4d e8 00 01 00 00 Jan 22 17:17:37 freenas (da3:mrsas0:0:3:0): CAM status: SCSI Status Error Jan 22 17:17:37 freenas (da3:mrsas0:0:3:0): SCSI status: OK Jan 22 17:17:38 freenas (da3:mrsas0:0:3:0): WRITE(10). CDB: 2a 00 00 40 01 d8 00 00 08 00 Jan 22 17:17:38 freenas (da3:mrsas0:0:3:0): CAM status: SCSI Status Error Jan 22 17:17:38 freenas (da3:mrsas0:0:3:0): SCSI status: OK Jan 22 17:20:09 freenas smartd[6232]: Device: /dev/da3 [SAT], ATA error count increased from 1034 to 6565 Jan 22 17:20:09 freenas smartd[6232]: Device: /dev/da3 [SAT], ATA error count increased from 1035 to 6565 Jan 22 17:20:38 freenas (da3:mrsas0:0:3:0): READ(10). CDB: 28 00 d7 cc bd 48 00 01 00 00 Jan 22 17:20:38 freenas (da3:mrsas0:0:3:0): CAM status: SCSI Status Error Jan 22 17:20:38 freenas (da3:mrsas0:0:3:0): SCSI status: OK Jan 22 17:21:05 freenas (da3:mrsas0:0:3:0): READ(10). CDB: 28 00 a8 1f 4a e8 00 01 00 00 Jan 22 17:21:05 freenas (da3:mrsas0:0:3:0): CAM status: SCSI Status Error Jan 22 17:21:05 freenas (da3:mrsas0:0:3:0): SCSI status: OK Jan 22 17:26:02 freenas (da3:mrsas0:0:3:0): READ(10). CDB: 28 00 17 fc 08 e0 00 01 00 00 Jan 22 17:26:02 freenas (da3:mrsas0:0:3:0): CAM status: SCSI Status Error Jan 22 17:26:02 freenas (da3:mrsas0:0:3:0): SCSI status: OK Jan 22 17:26:03 freenas (da3:mrsas0:0:3:0): READ(10). CDB: 28 00 17 fc 07 e0 00 01 00 00 Jan 22 17:26:03 freenas (da3:mrsas0:0:3:0): CAM status: SCSI Status Error Jan 22 17:26:03 freenas (da3:mrsas0:0:3:0): SCSI status: OK Jan 22 17:26:08 freenas (da3:mrsas0:0:3:0): READ(10). CDB: 28 00 2a cc 91 f0 00 00 c8 00 Jan 22 17:26:08 freenas (da3:mrsas0:0:3:0): CAM status: SCSI Status Error Jan 22 17:26:08 freenas (da3:mrsas0:0:3:0): SCSI status: OK Jan 22 17:26:44 freenas (da3:mrsas0:0:3:0): READ(10). CDB: 28 00 6f 81 52 60 00 01 00 00 Jan 22 17:26:44 freenas (da3:mrsas0:0:3:0): CAM status: SCSI Status Error Jan 22 17:26:44 freenas (da3:mrsas0:0:3:0): SCSI status: OK Jan 22 17:26:44 freenas (da3:mrsas0:0:3:0): READ(10). CDB: 28 00 6f 81 53 60 00 01 00 00 Jan 22 17:26:44 freenas (da3:mrsas0:0:3:0): CAM status: SCSI Status Error Jan 22 17:26:44 freenas (da3:mrsas0:0:3:0): SCSI status: OK Jan 22 17:26:44 freenas (da3:mrsas0:0:3:0): READ(10). CDB: 28 00 6f 81 50 60 00 01 00 00 Jan 22 17:26:44 freenas (da3:mrsas0:0:3:0): CAM status: SCSI Status Error Jan 22 17:26:44 freenas (da3:mrsas0:0:3:0): SCSI status: OK Jan 22 17:26:44 freenas (da3:mrsas0:0:3:0): READ(10). CDB: 28 00 6f 81 4f 60 00 01 00 00 Jan 22 17:26:44 freenas (da3:mrsas0:0:3:0): CAM status: SCSI Status Error Jan 22 17:26:44 freenas (da3:mrsas0:0:3:0): SCSI status: OK Jan 22 17:26:44 freenas (da3:mrsas0:0:3:0): READ(10). CDB: 28 00 6f 81 4e 60 00 01 00 00 Jan 22 17:26:44 freenas (da3:mrsas0:0:3:0): CAM status: SCSI Status Error Jan 22 17:26:44 freenas (da3:mrsas0:0:3:0): SCSI status: OK Jan 22 17:26:44 freenas (da3:mrsas0:0:3:0): READ(10). CDB: 28 00 6f 81 51 60 00 01 00 00 Jan 22 17:26:44 freenas (da3:mrsas0:0:3:0): CAM status: SCSI Status Error Jan 22 17:26:44 freenas (da3:mrsas0:0:3:0): SCSI status: OK Jan 22 17:26:45 freenas (da3:mrsas0:0:3:0): READ(10). CDB: 28 00 6f 81 54 60 00 01 00 00 Jan 22 17:26:45 freenas (da3:mrsas0:0:3:0): CAM status: SCSI Status Error Jan 22 17:26:45 freenas (da3:mrsas0:0:3:0): SCSI status: OK Jan 22 17:27:36 freenas (da3:mrsas0:0:3:0): READ(10). CDB: 28 00 08 1a 0b 88 00 01 00 00 Jan 22 17:27:36 freenas (da3:mrsas0:0:3:0): CAM status: SCSI Status Error Jan 22 17:27:36 freenas (da3:mrsas0:0:3:0): SCSI status: OK Jan 22 17:31:02 freenas (da3:mrsas0:0:3:0): READ(16). CDB: 88 00 00 00 00 03 97 ac 4a 98 00 00 01 00 00 00 Jan 22 17:31:02 freenas (da3:mrsas0:0:3:0): CAM status: SCSI Status Error Jan 22 17:31:02 freenas (da3:mrsas0:0:3:0): SCSI status: OK Jan 22 17:39:11 freenas (da3:mrsas0:0:3:0): READ(10). CDB: 28 00 17 e1 c2 e0 00 01 00 00 Jan 22 17:39:11 freenas (da3:mrsas0:0:3:0): CAM status: SCSI Status Error Jan 22 17:39:11 freenas (da3:mrsas0:0:3:0): SCSI status: OK Jan 22 17:39:33 freenas (da3:mrsas0:0:3:0): READ(10). CDB: 28 00 17 f7 25 e0 00 01 00 00 Jan 22 17:39:33 freenas (da3:mrsas0:0:3:0): CAM status: SCSI Status Error Jan 22 17:39:33 freenas (da3:mrsas0:0:3:0): SCSI status: OK Jan 22 17:39:33 freenas (da3:mrsas0:0:3:0): READ(10). CDB: 28 00 17 f7 2c e0 00 01 00 00 Jan 22 17:39:33 freenas (da3:mrsas0:0:3:0): CAM status: SCSI Status Error Jan 22 17:39:33 freenas (da3:mrsas0:0:3:0): SCSI status: OK Jan 22 17:44:31 freenas (da3:mrsas0:0:3:0): READ(10). CDB: 28 00 47 f9 72 c8 00 01 00 00 Jan 22 17:44:31 freenas (da3:mrsas0:0:3:0): CAM status: SCSI Status Error Jan 22 17:44:31 freenas (da3:mrsas0:0:3:0): SCSI status: OK Jan 22 17:50:09 freenas smartd[6232]: Device: /dev/da3 [SAT], ATA error count increased from 6565 to 14959 Jan 22 17:50:09 freenas smartd[6232]: Device: /dev/da3 [SAT], ATA error count increased from 6565 to 14959 Jan 22 17:50:27 freenas (da3:mrsas0:0:3:0): READ(10). CDB: 28 00 6f bc 42 98 00 01 00 00 Jan 22 17:50:27 freenas (da3:mrsas0:0:3:0): CAM status: SCSI Status Error Jan 22 17:50:27 freenas (da3:mrsas0:0:3:0): SCSI status: OK Jan 22 17:55:42 freenas (da3:mrsas0:0:3:0): READ(10). CDB: 28 00 77 c6 66 90 00 01 00 00 Jan 22 17:55:42 freenas (da3:mrsas0:0:3:0): CAM status: SCSI Status Error Jan 22 17:55:42 freenas (da3:mrsas0:0:3:0): SCSI status: OK Jan 22 17:59:28 freenas (da3:mrsas0:0:3:0): READ(10). CDB: 28 00 6f e6 01 10 00 01 00 00 Jan 22 17:59:28 freenas (da3:mrsas0:0:3:0): CAM status: SCSI Status Error Jan 22 17:59:28 freenas (da3:mrsas0:0:3:0): SCSI status: OK Jan 22 17:59:29 freenas (da3:mrsas0:0:3:0): READ(10). CDB: 28 00 6f e6 08 10 00 01 00 00 Jan 22 17:59:29 freenas (da3:mrsas0:0:3:0): CAM status: SCSI Status Error Jan 22 17:59:29 freenas (da3:mrsas0:0:3:0): SCSI status: OK Jan 22 18:00:09 freenas (da3:mrsas0:0:3:0): READ(10). CDB: 28 00 78 18 a5 60 00 01 00 00 Jan 22 18:00:09 freenas (da3:mrsas0:0:3:0): CAM status: SCSI Status Error Jan 22 18:00:09 freenas (da3:mrsas0:0:3:0): SCSI status: OK Jan 22 18:00:57 freenas (da3:mrsas0:0:3:0): READ(10). CDB: 28 00 71 76 aa b0 00 00 c8 00 Jan 22 18:00:57 freenas (da3:mrsas0:0:3:0): CAM status: SCSI Status Error Jan 22 18:00:57 freenas (da3:mrsas0:0:3:0): SCSI status: OK Jan 22 18:17:10 freenas (da3:mrsas0:0:3:0): WRITE(16). CDB: 8a 00 00 00 00 02 4a 2d ba d0 00 00 01 00 00 00 Jan 22 18:17:10 freenas (da3:mrsas0:0:3:0): CAM status: SCSI Status Error Jan 22 18:17:10 freenas (da3:mrsas0:0:3:0): SCSI status: OK Jan 22 18:20:08 freenas smartd[6232]: Device: /dev/da3 [SAT], ATA error count increased from 14959 to 18699 Jan 22 18:20:08 freenas smartd[6232]: Device: /dev/da3 [SAT], ATA error count increased from 14959 to 18699 Jan 22 18:50:08 freenas smartd[6232]: Device: /dev/da3 [SAT], ATA error count increased from 18699 to 18701 Jan 22 18:50:08 freenas smartd[6232]: Device: /dev/da3 [SAT], ATA error count increased from 18699 to 18701
Code:
root@freenas:~ # smartctl -a /dev/da3 smartctl 6.6 2017-11-05 r4594 [FreeBSD 11.1-STABLE amd64] (local build) Copyright (C) 2002-17, Bruce Allen, Christian Franke, www.smartmontools.org === START OF INFORMATION SECTION === Device Model: WDC WD80EDAZ-11TA3A0 Serial Number: VGK2KREG LU WWN Device Id: 5 000cca 0beeb71c9 Firmware Version: 81.00A81 User Capacity: 8,001,563,222,016 bytes [8.00 TB] Sector Sizes: 512 bytes logical, 4096 bytes physical Rotation Rate: 5400 rpm Form Factor: 3.5 inches Device is: Not in smartctl database [for details use: -P showall] ATA Version is: ACS-2, ATA8-ACS T13/1699-D revision 4 SATA Version is: SATA 3.2, 6.0 Gb/s (current: 6.0 Gb/s) Local Time is: Tue Jan 23 17:59:18 2024 WET SMART support is: Available - device has SMART capability. SMART support is: Enabled === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED General SMART Values: Offline data collection status: (0x82) Offline data collection activity was completed without error. Auto Offline Data Collection: Enabled. Self-test execution status: ( 0) The previous self-test routine completed without error or no self-test has ever been run. Total time to complete Offline data collection: ( 87) seconds. Offline data collection capabilities: (0x5b) SMART execute Offline immediate. Auto Offline data collection on/off support. Suspend Offline collection upon new command. Offline surface scan supported. Self-test supported. No Conveyance Self-test supported. Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. General Purpose Logging supported. Short self-test routine recommended polling time: ( 2) minutes. Extended self-test routine recommended polling time: ( 909) minutes. SCT capabilities: (0x003d) SCT Status supported. SCT Error Recovery Control supported. SCT Feature Control supported. SCT Data Table supported. SMART Attributes Data Structure revision number: 16 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE 1 Raw_Read_Error_Rate 0x000b 100 100 016 Pre-fail Always - 0 2 Throughput_Performance 0x0004 128 128 054 Old_age Offline - 108 3 Spin_Up_Time 0x0007 159 159 024 Pre-fail Always - 514 (Average 507) 4 Start_Stop_Count 0x0012 100 100 000 Old_age Always - 28 5 Reallocated_Sector_Ct 0x0033 100 100 005 Pre-fail Always - 0 7 Seek_Error_Rate 0x000a 100 100 067 Old_age Always - 0 8 Seek_Time_Performance 0x0004 128 128 020 Old_age Offline - 18 9 Power_On_Hours 0x0012 098 098 000 Old_age Always - 19670 10 Spin_Retry_Count 0x0012 100 100 060 Old_age Always - 0 12 Power_Cycle_Count 0x0032 100 100 000 Old_age Always - 28 192 Power-Off_Retract_Count 0x0032 100 100 000 Old_age Always - 833 193 Load_Cycle_Count 0x0012 100 100 000 Old_age Always - 833 194 Temperature_Celsius 0x0002 180 180 000 Old_age Always - 36 (Min/Max 23/49) 196 Reallocated_Event_Count 0x0032 100 100 000 Old_age Always - 0 197 Current_Pending_Sector 0x0022 100 100 000 Old_age Always - 0 198 Offline_Uncorrectable 0x0008 100 100 000 Old_age Offline - 0 199 UDMA_CRC_Error_Count 0x000a 200 200 000 Old_age Always - 22370 SMART Error Log Version: 1 ATA Error Count: 22370 (device log contains only the most recent five errors) CR = Command Register [HEX] FR = Features Register [HEX] SC = Sector Count Register [HEX] SN = Sector Number Register [HEX] CL = Cylinder Low Register [HEX] CH = Cylinder High Register [HEX] DH = Device/Head Register [HEX] DC = Device Command Register [HEX] ER = Error register [HEX] ST = Status register [HEX] Powered_Up_Time is measured from power on, and printed as DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes, SS=sec, and sss=millisec. It "wraps" after 49.710 days. Error 22370 occurred at disk power-on lifetime: 19670 hours (819 days + 14 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER ST SC SN CL CH DH -- -- -- -- -- -- -- 84 41 00 00 00 00 00 Error: ICRC, ABRT at LBA = 0x00000000 = 0 Commands leading to the command that caused the error were: CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name -- -- -- -- -- -- -- -- ---------------- -------------------- 60 00 00 d0 4a 23 40 00 1d+02:29:30.233 READ FPDMA QUEUED 60 00 00 d0 49 23 40 00 1d+02:29:30.232 READ FPDMA QUEUED 60 00 08 d0 48 23 40 00 1d+02:29:30.228 READ FPDMA QUEUED 60 00 00 d0 47 23 40 00 1d+02:29:30.223 READ FPDMA QUEUED 60 00 10 d0 40 23 40 00 1d+02:29:30.218 READ FPDMA QUEUED Error 22369 occurred at disk power-on lifetime: 19670 hours (819 days + 14 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER ST SC SN CL CH DH -- -- -- -- -- -- -- 84 41 00 00 00 00 00 Error: ICRC, ABRT at LBA = 0x00000000 = 0 Commands leading to the command that caused the error were: CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name -- -- -- -- -- -- -- -- ---------------- -------------------- 60 00 10 a0 09 13 40 00 1d+02:19:44.074 READ FPDMA QUEUED 60 00 08 a0 08 13 40 00 1d+02:19:44.059 READ FPDMA QUEUED 60 00 00 a0 07 13 40 00 1d+02:19:44.059 READ FPDMA QUEUED 2f 00 01 10 00 00 00 00 1d+02:19:44.055 READ LOG EXT 2f 00 01 10 00 00 00 00 1d+02:19:44.055 READ LOG EXT Error 22368 occurred at disk power-on lifetime: 19670 hours (819 days + 14 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER ST SC SN CL CH DH -- -- -- -- -- -- -- 84 41 00 00 00 00 00 Error: ICRC, ABRT at LBA = 0x00000000 = 0 Commands leading to the command that caused the error were: CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name -- -- -- -- -- -- -- -- ---------------- -------------------- 60 00 00 a0 07 13 40 00 1d+02:19:44.055 READ FPDMA QUEUED 60 00 10 a0 09 13 40 00 1d+02:19:44.037 READ FPDMA QUEUED 60 00 08 a0 08 13 40 00 1d+02:19:44.037 READ FPDMA QUEUED 60 10 00 28 68 51 40 00 1d+02:19:43.692 READ FPDMA QUEUED 60 10 00 98 66 4f 40 00 1d+02:19:43.405 READ FPDMA QUEUED Error 22367 occurred at disk power-on lifetime: 19670 hours (819 days + 14 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER ST SC SN CL CH DH -- -- -- -- -- -- -- 84 41 00 00 00 00 00 Error: ICRC, ABRT at LBA = 0x00000000 = 0 Commands leading to the command that caused the error were: CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name -- -- -- -- -- -- -- -- ---------------- -------------------- 60 00 08 e0 ee 40 40 00 1d+02:14:47.358 READ FPDMA QUEUED 60 00 00 e0 ed 40 40 00 1d+02:14:47.357 READ FPDMA QUEUED 60 00 08 e0 ec 40 40 00 1d+02:14:47.357 READ FPDMA QUEUED 60 00 00 e0 eb 40 40 00 1d+02:14:47.357 READ FPDMA QUEUED 60 00 08 e0 ea 40 40 00 1d+02:14:47.356 READ FPDMA QUEUED Error 22366 occurred at disk power-on lifetime: 19670 hours (819 days + 14 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER ST SC SN CL CH DH -- -- -- -- -- -- -- 84 41 00 00 00 00 00 Error: ICRC, ABRT at LBA = 0x00000000 = 0 Commands leading to the command that caused the error were: CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name -- -- -- -- -- -- -- -- ---------------- -------------------- 60 00 08 28 1a 40 40 00 1d+02:14:46.398 READ FPDMA QUEUED 60 00 00 28 19 40 40 00 1d+02:14:46.397 READ FPDMA QUEUED 60 00 10 28 18 40 40 00 1d+02:14:46.379 READ FPDMA QUEUED 60 00 08 28 17 40 40 00 1d+02:14:46.378 READ FPDMA QUEUED 60 e0 00 48 16 40 40 00 1d+02:14:46.378 READ FPDMA QUEUED SMART Self-test log structure revision number 1 Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error # 1 Short offline Completed without error 00% 19649 - # 2 Short offline Completed without error 00% 19644 - # 3 Short offline Completed without error 00% 19481 - # 4 Short offline Completed without error 00% 19313 - # 5 Short offline Completed without error 00% 19145 - # 6 Short offline Completed without error 00% 18977 - # 7 Short offline Completed without error 00% 18809 - # 8 Short offline Completed without error 00% 18641 - # 9 Extended offline Completed without error 00% 18512 - #10 Short offline Completed without error 00% 18473 - #11 Short offline Completed without error 00% 18305 - #12 Short offline Completed without error 00% 18137 - #13 Short offline Completed without error 00% 17969 - #14 Short offline Completed without error 00% 17801 - #15 Short offline Completed without error 00% 17633 - #16 Short offline Completed without error 00% 17464 - #17 Short offline Completed without error 00% 17296 - #18 Short offline Completed without error 00% 17128 - #19 Extended offline Completed without error 00% 16999 - #20 Short offline Completed without error 00% 16960 - #21 Short offline Completed without error 00% 16792 - SMART Selective self-test log data structure revision number 1 SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS 1 0 0 Not_testing 2 0 0 Not_testing 3 0 0 Not_testing 4 0 0 Not_testing 5 0 0 Not_testing Selective self-test flags (0x0): After scanning selected spans, do NOT read-scan remainder of disk. If Selective self-test is pending on power-up, resume after 0 minute delay.
I did a short smart test but I didn't do a long because it might slow the resilver a lot.
thanks.