Freenas 11.0-U4 / Lenovo TS440, 32Gb RAM, 32Tb HDD
My GUI Storage -> View Disks option shows the following:
The GUI System -> Boot -> Status display shows:
The second boot volume mirror device is showing up in the GUI as a potential NAS device, which is wrong. Where does the GUI View Disks get it's information? And, what kind of suggestions might folks have for fixing this?
My current best guess is that the GPT table on the da5 device is messed up, and if so, a possible fix would be to remove it from the boot pool mirror and wipe it clean with the GUI. But I don't want to break anything without really knowing what is going on. I am comfortable with the unix cli, and am happy to try any suggestions.
Thank you,
Paul Homchick
My GUI Storage -> View Disks option shows the following:
Code:
ada0 PK2334PCKD989B 4.0 TB ada1 PK2334PEK3U6VT 4.0 TB ada2 PK1334PCKDBL3X 4.0 TB ada3 PK2334PCJSXUMB 4.0 TB da0 PK1331PAH67ZYX 4.0 TB da1 PK1334PCJUDXXS 4.0 TB da2 PK1334PCJP53ZS 4.0 TB da3 PK2334PCJSX0MB 4.0 TB da5 07015C06BB278C10 15.5 GB
Code:
freenas-boot mirror-0 da4p2 da5p2
My current best guess is that the GPT table on the da5 device is messed up, and if so, a possible fix would be to remove it from the boot pool mirror and wipe it clean with the GUI. But I don't want to break anything without really knowing what is going on. I am comfortable with the unix cli, and am happy to try any suggestions.
Thank you,
Paul Homchick