FlyingPersian
Patron
- Joined
- Jan 27, 2014
- Messages
- 237
Hi
I just updated my FreeNAS from the latest to the current version. My NAS is running on a mirrored setup, but after updating one of the USB sticks is degraded. This is the message I get when I run "zpool status -x":
On the provided link I looked under "If the device has been replaced by another disk in the same physical slot, then the device can be replaced using a single argument to the 'zpool replace' command:" and ran "zpool replace freenas-boot da1p2". I got this error:
Then I tried it with "/dev/da1p2":
I the GUI under "replace --> member disk" no disks appear (I didn't put a different USB stick in). I don't think the disk itself is broken. My guess is that it hasn't been updated while the other one has been. How can I fix this? Thanks in advance!
I just updated my FreeNAS from the latest to the current version. My NAS is running on a mirrored setup, but after updating one of the USB sticks is degraded. This is the message I get when I run "zpool status -x":
Code:
[root@freenas] ~# zpool status -x pool: freenas-boot state: DEGRADED status: One or more devices could not be opened. Sufficient replicas exist for the pool to continue functioning in a degraded state. action: Attach the missing device and online it using 'zpool online'. see: http://illumos.org/msg/ZFS-8000-2Q scan: none requested config: NAME STATE READ WRITE CKSUM freenas-boot DEGRADED 0 0 0 mirror-0 DEGRADED 0 0 0 da0p2 ONLINE 0 0 0 11888006409378086365 UNAVAIL 20 410 0 was /dev/da1p2 errors: No known data errors
On the provided link I looked under "If the device has been replaced by another disk in the same physical slot, then the device can be replaced using a single argument to the 'zpool replace' command:" and ran "zpool replace freenas-boot da1p2". I got this error:
Code:
[root@freenas] ~# zpool replace freenas-boot da1p2 cannot open 'da1p2': no such GEOM provider must be a full path or shorthand device name
Then I tried it with "/dev/da1p2":
Code:
[root@freenas] ~# zpool replace freenas-boot /dev/da1p2 cannot open '/dev/da1p2': No such file or directory
I the GUI under "replace --> member disk" no disks appear (I didn't put a different USB stick in). I don't think the disk itself is broken. My guess is that it hasn't been updated while the other one has been. How can I fix this? Thanks in advance!