Chris Tobey
Contributor
- Joined
- Feb 11, 2014
- Messages
- 114
Hi Everyone,
I am currently getting ~500 MB/s reads and writes over 10GbE with my system and 175 MB/s replication from this server to a similar (but older) server over 10GbE.
Server Configuration:
ZFS Pool:
Replication is done with Replication Stream Compression = Off and Encryption Cipher = Disabled
My question is: what tests should I run to find the max performance my system is capable of, and what changes/tuning should I do to reach that performance.
I am currently getting ~500 MB/s reads and writes over 10GbE with my system and 175 MB/s replication from this server to a similar (but older) server over 10GbE.
Server Configuration:
Chassis: Supermicro CSE-846BE16-R920B
Motherboard: Supermicro X9DRD-7LN4F
CPUs: 2 x Xeon E5-2603v2
RAM: 12 x 16GB ECC DDR3-1866
SLOG: Intel Optane P4800X.
Interface: Currently 1 of 2 10GbE Chelsio NIC ports, but expandable to 4x10GbE should I be able to take advantage of it.
ZFS Pool:
root@freenas:~ # zpool status
pool: SG1
state: ONLINE
scan: scrub repaired 0 in 4 days 21:39:45 with 0 errors on Thu Sep 20 21:39:59 2018
config:
NAME STATE READ WRITE CKSUM
pool1 ONLINE 0 0 0
raidz2-0 ONLINE 0 0 0
gptid/55ef2498-ac64-11e5-b6ed-0025905800c4 ONLINE 0 0 0
gptid/56ce660c-ac64-11e5-b6ed-0025905800c4 ONLINE 0 0 0
gptid/57c2220a-ac64-11e5-b6ed-0025905800c4 ONLINE 0 0 0
gptid/58a788e2-ac64-11e5-b6ed-0025905800c4 ONLINE 0 0 0
gptid/59a42bc4-ac64-11e5-b6ed-0025905800c4 ONLINE 0 0 0
gptid/5a9d3eee-ac64-11e5-b6ed-0025905800c4 ONLINE 0 0 0
raidz2-2 ONLINE 0 0 0
gptid/f47a731e-ffea-11e5-ab2b-0cc47a1e4734 ONLINE 0 0 0
gptid/f58f6ee3-ffea-11e5-ab2b-0cc47a1e4734 ONLINE 0 0 0
gptid/f699307f-ffea-11e5-ab2b-0cc47a1e4734 ONLINE 0 0 0
gptid/f79e727b-ffea-11e5-ab2b-0cc47a1e4734 ONLINE 0 0 0
gptid/f8aab7e9-ffea-11e5-ab2b-0cc47a1e4734 ONLINE 0 0 0
gptid/f9c2c4df-ffea-11e5-ab2b-0cc47a1e4734 ONLINE 0 0 0
logs
gptid/0d56f7b3-c8f7-11e8-a885-0cc47a1e4734 ONLINE 0 0 0
errors: No known data errors
Replication is done with Replication Stream Compression = Off and Encryption Cipher = Disabled
My question is: what tests should I run to find the max performance my system is capable of, and what changes/tuning should I do to reach that performance.