Hi all, Before we start, hereby the system I am running: - Intel I7 - 4x 4GB RAM - Asrock-z77-extreme4 motherboard - 240GB SSD (NEW) - 4x 2TB HDD (NEW) ESXi 6.7 is running on a 32GB USB-stick and FreeNAS 11.2-stable is installed on the 240GB SSD. I got the 4x 2TB HDD connected to FreeNAS with...

Hello, I got new alert, better exchange the harddrive? smartctl -a /dev/da7 smartctl 6.6 2017-11-05 r4594 [FreeBSD 11.1-STABLE amd64] (local build) Copyright (C) 2002-17, Bruce Allen, Christian Franke, www.smartmontools.org === START OF INFORMATION SECTION === Model Family: Seagate...

Hello, I have a FreeNAS 8 setup that I plan to migrate soon. It ran into a scheduled scrub yesterday and during the scrub, it is finding a lot of 'MEDIUM ERRORs' on two disks of my zpool. My first instinct was to replace both of these disk but when I checked zpool status, the scrub is still...

I7 4790k 16 gb Ram Corsair vengeance 2400 mhz ddr3 asus maximus VI Hero hx750i PSU WD Green 3tb drives x 6 (Mirrored) FreeNAS-9.3-STABLE-201412090314 [root@freenas ~]# zpool import pool: Media id: 12090416692805278326 state: UNAVAIL...

Hi all, I'm sure some of you can help me out. I have a 3 TB (WD30EFRX) drive which has an error in FreeNAS (v.9.10). The error is "Device: /dev/ada0, 1 Currently unreadable (pending) sectors". I did the smartctl long test and the result is PASSED and no errors detected. Also I did the long WD...

Will be glad if someone could help, I have the couple of errors below suddenly start to appear on my freenas. Device: /dev/ada1, 20 Currently unreadable (pending) sectors Device: /dev/ada1, ATA error count increased from 86 to 88 I have tried the steps defined here -...