Hi, Firstly, due to personal reasons, my current NAS setup was never fully completed upon last rebuild, adding all the email stuff for alerts and scripts etc. That was my bad, but I just wasn't using it either, until recently. So I had undusted the box to try get a good working Plex setup again...

I have a 8x6TB RaidZ2 system. I purchased 8 new drives to increase capacity. There are spare drive slots available in the system. The system allows hot swapping (I can see the new drive.) My intention is to insert a new larger drive into an open slot, then tell the system to replace one of the...

My boot device has "recently" been DEGRADED. So I've bought two new USBs and now I'm trying to replace the degraded device with two new. This is my process: System -> Boot Environments -> Status -> Attach - Member Disk = da2 - Save [EFAULT] 'newfs_msdos -F 16 /dev/da2p1' failed: newfs_msdos...

The volume TooksVolume state is DEGRADED: One or more devices could not be opened. Sufficient replicas exist for the pool to continue functioning in a degraded state. What are the steps to add a new disk that is already in the server?

Hi Guys, Looks like I have a pool in a degraded state, I think because the hotspares kicked in. This system is running FreeNAS 11.1-U4. Please take a look at this zpool status. I assume I need to detach the faulted drives and the spares will become permanent from what I have read...

A drive in my 8x2TB pool failed and I replaced it with a brand new, out of the box 4TB drive and got this error: https://www.dropbox.com/s/xktttvbvhrfdt3z/Screenshot%202018-06-27%2020.03.45.png?dl=0 There's nothing on it so I forced it and got this python error: Request Method: POST Request...

Hello, I was able to get my hand on a 32 GB RAM ECC and on a great time, my machine was lacking some RAM. This RAM is not on the list of the compatible ones from my motherboard, what is the correct procedure to test if they will work? I normally run MemoryTest for 1 day, and if no errors are...

I have one volume I've named 'D' I have two disks in this volume, one 1TB HDD, and one 2TB HDD. My data takes up 1.6TB. I started with the 1TB HDD as that was what I had at the time, then I bought the 2TB HDD, and added to the system a month later for more storage. Now I'm realizing the error...

Long story short. I wanted to use bigger flash drives for a bigger boot mirror. I was advised to "replace" smaller flash drives with bigger. Now I can only boot with all 4 flash drives in my machine. Is there any way to recover from this without reinstalling back to the 8g FD with that config...

Hallo mich würde mal interessieren wie genau ein Hardware Tausch bei freenas ablaufen würde. Mal angenommen freenas wurde bei der Installation auf 2 gespiegelten Festplatten installiert und ich tausche nur mainboard, CPU und RAM der HBA den ich verwendet habe bleibt drin. Wie ziehe ich mein...

Hi all, Help! We currently have a spectacular zpool status which contains the following: state: DEGRADED status: One or more devices has experienced an unrecoverable error. An attempt was made to correct the error. Applications are unaffected. action: Determine if the device needs to be...