pool size

  1. M

    New disks are not recognized - FreeNAS-11.2-RELEASE-U1

    Hi all, Long time visitor of the forum, first-time poster. Up until today, the information available from the community was enough to get me unstuck. However this time I cannt seem to find an answer to my problem. Three years ago, I put together a small server with leftover parts from a...
    • maozefang
    • Thread
    • 11.2 stable disk not detected pool size storage freenas
    • Replies: 23
    • Forum: Storage
  2. B

    SOLVED Pool size unchanged after adding larger hard drive

    Hi guys, my experience with FreeNAS is pretty limited. I built it myself being a technical guy but used the FreeNAS documentation and maybe some guidance from walkthroughs etc. to set it up initially. Of course this has created its own set of problems in that when i built it i used 4 x 6TB WD...
    • burnthelies
    • Thread
    • autoexpand new hard drive pool size
    • Replies: 11
    • Forum: Storage
  3. cronsloth

    SNMP OID for usable Amount on Pool

    Subject pretty much explains it. But here is what is happening. I have an 8 disk (6TB/disk) Z-RAID(2) setup and when I do an SNMP walk on the FREENAS-MIB, I always get the total disk-space for the pool instead of usable disk-space. I.E. snmpwalk -O s -v 2c -c public -t 100 <IPADDRESS> FREENAS...
  4. N

    Pool Suggestions

    I am planning on upgrading my freenas box. Just upgraded the RAM/ CPU and will also be moving to v11U2 as well. My current specs are below. FreeNAS-8.3.1-RELEASE-x64 (r13452) ASUS P8Z68 - i7-3770, 32GB DDR3 RAIDZ2: WD60EFRX x 4 (WD Red) RAIDZ HDS724040ALE640 x 2 (Archive-Normally spun down)...
    • NASbox
    • Thread
    • pool size raidz2
    • Replies: 3
    • Forum: Storage
Top