Started getting massive amounts of drive related errors for all 4 drives. I replaced the worst drive (based on read/write errors) and re-silvered. New drive started throwing errors soon after replacement. Shut it down and checked every card and cable connection in the box. Found a loose red wire...

I am in the process of upgrading (from 8.3.1 to 11U4) and rebuilding my FreeNAS (New CPU/MB/LSI LBA and SSD boot device). I installed FreeNAS v11-U3 to an SSD drive, then later upgraded to U4, played around with the GUI and networking configuration. I then attached my pools, and did some more...

Just going to preface this with I know I'm an idiot for not backing up the config, so no need to roast me on that. I'm still an amateur with more advanced computing, such as server and NAS environments, so bare with me. I moved my desk from one location to another, and with that I also moved my...

We've been having checksum issues on iSCSI volumes created in our 60 disk Storinator. Here's what we saw: We first had checksum errors on the pool - on random disks, continuing to propagate through all the disks. Not read or write errors, just cksum. I destroyed the whole pool and recreated...

ada0 at ahcich0 bus 0 scbus0 target 0 lun 0 ada0: <WDC WD40EFRX-68WT0N0 82.00A82> ACS-2 ATA SATA 3.x device ada0: Serial Number WD-WCC4E0YY99HK ada0: 600.000MB/s transfers (SATA 3.x, UDMA6, PIO 8192bytes) ada0: Command Queueing enabled ada0: 3815447MB (7814037168 512 byte sectors) ada0...

So, I've made a new FreeNAS white box build, (since my old build decided to kick the bucket (again) with a second C2550d4i motherboard dying in six months -Still salty about that). Build: Proc: Dual Intel E5-2670 Mobo: ASRock EP2C602-4L/D16 Mem: 4 Samsung 16GB ECC RDIMM DDR3 HDD: 7, 6Tb WD Red...