-
Important Announcement for The TrueNAS Community.
The TrueNAS Community has now been moved. This forum will now become READ-ONLY for historical purposes. Please feel free to join us on the new TrueNAS Community Forums
Solaris: Notice Cannot find the pool label for freenas-boot after update
- Thread starter Nitro626
- Start date
D
dlavigne
Guest
It's possible the boot device failed. Does a fresh install of that version resolve the issue? If so, you can restore your config.
Nitro626
Dabbler
- Joined
- Mar 4, 2019
- Messages
- 29
Attachments
Last edited:
Fredda
Guru
- Joined
- Jul 9, 2019
- Messages
- 608
Sure about this? Your post #1 says otherwise. "da4: <iDRAC ... > Removable ...:"
Do you have any virtual media attached via the remote console?
Nitro626
Dabbler
- Joined
- Mar 4, 2019
- Messages
- 29
Yes I am sure look at my second post, the update started this error, there is no media in the CDRom or iDarc virtual drive. DA4 is a 1TB pool drive as once I rolled back the update it shows up as shown in post 2 image.
Ok this is odd, I've just re-enable the U7 boot, and its booted ok, but look
Last edited:
Fredda
Guru
- Joined
- Jul 9, 2019
- Messages
- 608
Hmm, this really strange, but I still suspect, the boot behaves different as soon as you boot with iDRAC console connected.
Is there anything not working now? Or are you just wondering about the mysterious drives showing up?
So is da4 missing now? What is the output of
What is the boot output if you boot without the iDRAC connected?
You can get that output with the
Is there anything not working now? Or are you just wondering about the mysterious drives showing up?
So is da4 missing now? What is the output of
zpool status?What is the boot output if you boot without the iDRAC connected?
You can get that output with the
dmesg command. When you post it, please don't use images, post text with [code][/code] tags.
Nitro626
Dabbler
- Joined
- Mar 4, 2019
- Messages
- 29
Output from Zpool Status:-
Dmesg:-
Code:
pool: NitroStorage
state: ONLINE
scan: scrub repaired 0 in 0 days 03:19:59 with 0 errors on Sun Nov 3 03:20:00 2019
config:
NAME STATE READ WRITE CKSUM
NitroStorage ONLINE 0 0 0
gptid/9c01edbb-5c4b-11e9-bc1a-bc305be258e9 ONLINE 0 0 0
gptid/9cecfb1a-5c4b-11e9-bc1a-bc305be258e9 ONLINE 0 0 0
gptid/9e81a679-5c4b-11e9-bc1a-bc305be258e9 ONLINE 0 0 0
gptid/9fe753b5-5c4b-11e9-bc1a-bc305be258e9 ONLINE 0 0 0
errors: No known data errors
pool: freenas-boot
state: ONLINE
scan: scrub repaired 0 in 0 days 00:00:21 with 0 errors on Fri Nov 22 03:45:21 2019
config:
NAME STATE READ WRITE CKSUM
freenas-boot ONLINE 0 0 0
da0p2 ONLINE 0 0 0
errors: No known data errors
Dmesg:-
Code:
Copyright (c) 1992-2018 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 11.2-STABLE #0 r325575+c9231c7d6bd(HEAD): Mon Nov 18 22:46:47 UTC 2019
root@nemesis:/freenas-releng/freenas/_BE/objs/freenas-releng/freenas/_BE/os/sys/FreeNAS.amd64 amd64
FreeBSD clang version 6.0.0 (tags/RELEASE_600/final 326565) (based on LLVM 6.0.0)
VT(efifb): resolution 640x480
CPU: Intel(R) Xeon(R) CPU X5670 @ 2.93GHz (2926.07-MHz K8-class CPU)
Origin="GenuineIntel" Id=0x206c2 Family=0x6 Model=0x2c Stepping=2
Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
Features2=0x29ee3ff<SSE3,PCLMULQDQ,DTES64,MON,DS_CPL,VMX,SMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,PCID,DCA,SSE4.1,SSE4.2,POPCNT,AESNI>
AMD Features=0x2c100800<SYSCALL,NX,Page1GB,RDTSCP,LM>
AMD Features2=0x1<LAHF>
Structured Extended Features3=0x9c000000<IBPB,STIBP,SSBD>
VT-x: PAT,HLT,MTF,PAUSE,EPT,UG,VPID
TSC: P-state invariant, performance statistics
real memory = 68719476736 (65536 MB)
avail memory = 66722091008 (63631 MB)
Event timer "LAPIC" quality 600
ACPI APIC Table: <DELL PE_SC3 >
FreeBSD/SMP: Multiprocessor System Detected: 24 CPUs
FreeBSD/SMP: 2 package(s) x 6 core(s) x 2 hardware threads
WARNING: VIMAGE (virtualized network stack) is a highly experimental feature.
ioapic1: Changing APIC ID to 1
ioapic0 <Version 2.0> irqs 0-23 on motherboard
ioapic1 <Version 2.0> irqs 32-55 on motherboard
SMP: AP CPU #1 Launched!
SMP: AP CPU #17 Launched!
SMP: AP CPU #11 Launched!
SMP: AP CPU #13 Launched!
SMP: AP CPU #8 Launched!
SMP: AP CPU #12 Launched!
SMP: AP CPU #2 Launched!
SMP: AP CPU #3 Launched!
SMP: AP CPU #5 Launched!
SMP: AP CPU #10 Launched!
SMP: AP CPU #4 Launched!
SMP: AP CPU #18 Launched!
SMP: AP CPU #21 Launched!
SMP: AP CPU #23 Launched!
SMP: AP CPU #9 Launched!
SMP: AP CPU #22 Launched!
SMP: AP CPU #6 Launched!
SMP: AP CPU #15 Launched!
SMP: AP CPU #19 Launched!
SMP: AP CPU #7 Launched!
SMP: AP CPU #16 Launched!
SMP: AP CPU #20 Launched!
SMP: AP CPU #14 Launched!
Timecounter "TSC-low" frequency 1463032972 Hz quality 1000
random: entropy device external interface
kbd1 at kbdmux0
nexus0
cryptosoft0: <software crypto> on motherboard
aesni0: <AES-CBC,AES-XTS,AES-GCM,AES-ICM> on motherboard
padlock0: No ACE support.
acpi0: <DELL PE_SC3> on motherboard
acpi0: Power Button (fixed)
ipmi0: <IPMI System Interface> port 0xca8,0xcac on acpi0
ipmi0: KCS mode found at io 0xca8 on acpi
cpu0: <ACPI CPU> on acpi0
cpu1: <ACPI CPU> on acpi0
cpu2: <ACPI CPU> on acpi0
cpu3: <ACPI CPU> on acpi0
cpu4: <ACPI CPU> on acpi0
cpu5: <ACPI CPU> on acpi0
cpu6: <ACPI CPU> on acpi0
cpu7: <ACPI CPU> on acpi0
cpu8: <ACPI CPU> on acpi0
cpu9: <ACPI CPU> on acpi0
cpu10: <ACPI CPU> on acpi0
cpu11: <ACPI CPU> on acpi0
cpu12: <ACPI CPU> on acpi0
cpu13: <ACPI CPU> on acpi0
cpu14: <ACPI CPU> on acpi0
cpu15: <ACPI CPU> on acpi0
cpu16: <ACPI CPU> on acpi0
cpu17: <ACPI CPU> on acpi0
cpu18: <ACPI CPU> on acpi0
cpu19: <ACPI CPU> on acpi0
cpu20: <ACPI CPU> on acpi0
cpu21: <ACPI CPU> on acpi0
cpu22: <ACPI CPU> on acpi0
cpu23: <ACPI CPU> on acpi0
atrtc0: <AT realtime clock> port 0x70-0x7f irq 8 on acpi0
atrtc0: registered as a time-of-day clock, resolution 1.000000s
Event timer "RTC" frequency 32768 Hz quality 0
attimer0: <AT timer> port 0x40-0x5f irq 0 on acpi0
Timecounter "i8254" frequency 1193182 Hz quality 0
Event timer "i8254" frequency 1193182 Hz quality 100
hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0
Timecounter "HPET" frequency 14318180 Hz quality 950
Event timer "HPET" frequency 14318180 Hz quality 350
Event timer "HPET1" frequency 14318180 Hz quality 340
Event timer "HPET2" frequency 14318180 Hz quality 340
Event timer "HPET3" frequency 14318180 Hz quality 340
Timecounter "ACPI-fast" frequency 3579545 Hz quality 900
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x808-0x80b on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pcib0: _OSC returned error 0x10
pci0: <ACPI PCI bus> on pcib0
pcib1: <ACPI PCI-PCI bridge> at device 1.0 on pci0
pci1: <ACPI PCI bus> on pcib1
bce0: <QLogic NetXtreme II BCM5709 1000Base-T (C0)> mem 0xda000000-0xdbffffff irq 36 at device 0.0 on pci1
miibus0: <MII bus> on bce0
brgphy0: <BCM5709 10/100/1000baseT PHY> PHY 1 on miibus0
brgphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-master, 1000baseT-FDX, 1000baseT-FDX-master, auto, auto-flow
bce0: Using defaults for TSO: 65518/35/2048
bce0: Ethernet address: bc:30:5b:e2:58:e9
bce0:
bce0: link state changed to DOWN
ASIC (0x57092003); Rev (C0); Bus (PCIe x4, 2.5Gbps); B/C (7.10.0); Bufs (RX:2;TX:2;PG:8); Flags (SPLT|MSI|MFW); MFW (NCSI 2.0.13)
Coal (RX:6,6,18,18; TX:20,20,80,80)
bce1: <QLogic NetXtreme II BCM5709 1000Base-T (C0)> mem 0xdc000000-0xddffffff irq 48 at device 0.1 on pci1
miibus1: <MII bus> on bce1
brgphy1: <BCM5709 10/100/1000baseT PHY> PHY 1 on miibus1
brgphy1: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-master, 1000baseT-FDX, 1000baseT-FDX-master, auto, auto-flow
bce1: Using defaults for TSO: 65518/35/2048
bce1: Ethernet address: bc:30:5b:e2:58:eb
bce1:
bce1: link state changed to DOWN
ASIC (0x57092003); Rev (C0); Bus (PCIe x4, 2.5Gbps); B/C (7.10.0); Bufs (RX:2;TX:2;PG:8); Flags (SPLT|MSI|MFW); MFW (NCSI 2.0.13)
Coal (RX:6,6,18,18; TX:20,20,80,80)
pcib2: <ACPI PCI-PCI bridge> at device 3.0 on pci0
pci2: <ACPI PCI bus> on pcib2
pcib3: <ACPI PCI-PCI bridge> at device 4.0 on pci0
pci3: <ACPI PCI bus> on pcib3
mps0: <Avago Technologies (LSI) SAS2008> port 0xfc00-0xfcff mem 0xdf2b0000-0xdf2bffff,0xdf2c0000-0xdf2fffff irq 33 at device 0.0 on pci3
mps0: Firmware: 20.00.07.00, Driver: 21.02.00.00-fbsd
mps0: IOCCapabilities: 1285c<ScsiTaskFull,DiagTrace,SnapBuf,EEDP,TransRetry,EventReplay,HostDisc>
pcib4: <ACPI PCI-PCI bridge> at device 5.0 on pci0
pci4: <ACPI PCI bus> on pcib4
pcib5: <ACPI PCI-PCI bridge> at device 6.0 on pci0
pci5: <ACPI PCI bus> on pcib5
pcib6: <ACPI PCI-PCI bridge> at device 7.0 on pci0
pci6: <ACPI PCI bus> on pcib6
pcib7: <ACPI PCI-PCI bridge> at device 9.0 on pci0
pci7: <ACPI PCI bus> on pcib7
pci0: <base peripheral, interrupt controller> at device 20.0 (no driver attached)
pci0: <base peripheral, interrupt controller> at device 20.1 (no driver attached)
pci0: <base peripheral, interrupt controller> at device 20.2 (no driver attached)
uhci0: <Intel 82801I (ICH9) USB controller> port 0xec40-0xec5f irq 17 at device 26.0 on pci0
uhci0: LegSup = 0x2f00
usbus0 on uhci0
usbus0: 12Mbps Full Speed USB v1.0
uhci1: <Intel 82801I (ICH9) USB controller> port 0xec60-0xec7f irq 18 at device 26.1 on pci0
uhci1: LegSup = 0x2f00
usbus1 on uhci1
usbus1: 12Mbps Full Speed USB v1.0
ehci0: <Intel 82801I (ICH9) USB 2.0 controller> mem 0xdf0fe000-0xdf0fe3ff irq 19 at device 26.7 on pci0
usbus2: EHCI version 1.0
usbus2 on ehci0
usbus2: 480Mbps High Speed USB v2.0
uhci2: <Intel 82801I (ICH9) USB controller> port 0xec80-0xec9f irq 21 at device 29.0 on pci0
uhci2: LegSup = 0x2f00
usbus3 on uhci2
usbus3: 12Mbps Full Speed USB v1.0
uhci3: <Intel 82801I (ICH9) USB controller> port 0xeca0-0xecbf irq 20 at device 29.1 on pci0
uhci3: LegSup = 0x2f00
usbus4 on uhci3
usbus4: 12Mbps Full Speed USB v1.0
ehci1: <Intel 82801I (ICH9) USB 2.0 controller> mem 0xdf0ff000-0xdf0ff3ff irq 21 at device 29.7 on pci0
usbus5: EHCI version 1.0
usbus5 on ehci1
usbus5: 480Mbps High Speed USB v2.0
pcib8: <ACPI PCI-PCI bridge> at device 30.0 on pci0
pci8: <ACPI PCI bus> on pcib8
vgapci0: <VGA-compatible display> mem 0xd9800000-0xd9ffffff,0xde7fc000-0xde7fffff,0xde800000-0xdeffffff irq 19 at device 3.0 on pci8
vgapci0: Boot video device
isab0: <PCI-ISA bridge> at device 31.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <Intel ICH9 SATA300 controller> port 0xec10-0xec17,0xec08-0xec0b,0xec18-0xec1f,0xec0c-0xec0f,0xec20-0xec2f,0xec30-0xec3f irq 23 at device 31.2 on pci0
ata2: <ATA channel> at channel 0 on atapci0
ata3: <ATA channel> at channel 1 on atapci0
uart0: <16550 or compatible> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0
uart1: <16550 or compatible> port 0x2f8-0x2ff irq 3 on acpi0
ichwd0: <Intel ICH9 watchdog timer> on isa0
orm0: <ISA Option ROMs> at iomem 0xc0000-0xc7fff,0xce000-0xcefff,0xec000-0xeffff on isa0
atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
atkbd0: [GIANT-LOCKED]
coretemp0: <CPU On-Die Thermal Sensors> on cpu0
est0: <Enhanced SpeedStep Frequency Control> on cpu0
est: CPU supports Enhanced Speedstep, but is not recognized.
est: cpu_vendor GenuineIntel, msr 17
device_attach: est0 attach returned 6
coretemp1: <CPU On-Die Thermal Sensors> on cpu1
est1: <Enhanced SpeedStep Frequency Control> on cpu1
est: CPU supports Enhanced Speedstep, but is not recognized.
est: cpu_vendor GenuineIntel, msr 17
device_attach: est1 attach returned 6
coretemp2: <CPU On-Die Thermal Sensors> on cpu2
est2: <Enhanced SpeedStep Frequency Control> on cpu2
est: CPU supports Enhanced Speedstep, but is not recognized.
est: cpu_vendor GenuineIntel, msr 17
device_attach: est2 attach returned 6
coretemp3: <CPU On-Die Thermal Sensors> on cpu3
est3: <Enhanced SpeedStep Frequency Control> on cpu3
est: CPU supports Enhanced Speedstep, but is not recognized.
est: cpu_vendor GenuineIntel, msr 17
device_attach: est3 attach returned 6
coretemp4: <CPU On-Die Thermal Sensors> on cpu4
est4: <Enhanced SpeedStep Frequency Control> on cpu4
est: CPU supports Enhanced Speedstep, but is not recognized.
est: cpu_vendor GenuineIntel, msr 17
device_attach: est4 attach returned 6
coretemp5: <CPU On-Die Thermal Sensors> on cpu5
est5: <Enhanced SpeedStep Frequency Control> on cpu5
est: CPU supports Enhanced Speedstep, but is not recognized.
est: cpu_vendor GenuineIntel, msr 17
device_attach: est5 attach returned 6
coretemp6: <CPU On-Die Thermal Sensors> on cpu6
est6: <Enhanced SpeedStep Frequency Control> on cpu6
est: CPU supports Enhanced Speedstep, but is not recognized.
est: cpu_vendor GenuineIntel, msr 17
device_attach: est6 attach returned 6
coretemp7: <CPU On-Die Thermal Sensors> on cpu7
est7: <Enhanced SpeedStep Frequency Control> on cpu7
est: CPU supports Enhanced Speedstep, but is not recognized.
est: cpu_vendor GenuineIntel, msr 17
device_attach: est7 attach returned 6
coretemp8: <CPU On-Die Thermal Sensors> on cpu8
est8: <Enhanced SpeedStep Frequency Control> on cpu8
est: CPU supports Enhanced Speedstep, but is not recognized.
est: cpu_vendor GenuineIntel, msr 17
device_attach: est8 attach returned 6
coretemp9: <CPU On-Die Thermal Sensors> on cpu9
est9: <Enhanced SpeedStep Frequency Control> on cpu9
est: CPU supports Enhanced Speedstep, but is not recognized.
est: cpu_vendor GenuineIntel, msr 17
device_attach: est9 attach returned 6
coretemp10: <CPU On-Die Thermal Sensors> on cpu10
est10: <Enhanced SpeedStep Frequency Control> on cpu10
est: CPU supports Enhanced Speedstep, but is not recognized.
est: cpu_vendor GenuineIntel, msr 17
device_attach: est10 attach returned 6
coretemp11: <CPU On-Die Thermal Sensors> on cpu11
est11: <Enhanced SpeedStep Frequency Control> on cpu11
est: CPU supports Enhanced Speedstep, but is not recognized.
est: cpu_vendor GenuineIntel, msr 17
device_attach: est11 attach returned 6
coretemp12: <CPU On-Die Thermal Sensors> on cpu12
est12: <Enhanced SpeedStep Frequency Control> on cpu12
est: CPU supports Enhanced Speedstep, but is not recognized.
est: cpu_vendor GenuineIntel, msr 17
device_attach: est12 attach returned 6
coretemp13: <CPU On-Die Thermal Sensors> on cpu13
est13: <Enhanced SpeedStep Frequency Control> on cpu13
est: CPU supports Enhanced Speedstep, but is not recognized.
est: cpu_vendor GenuineIntel, msr 17
device_attach: est13 attach returned 6
coretemp14: <CPU On-Die Thermal Sensors> on cpu14
est14: <Enhanced SpeedStep Frequency Control> on cpu14
est: CPU supports Enhanced Speedstep, but is not recognized.
est: cpu_vendor GenuineIntel, msr 17
device_attach: est14 attach returned 6
coretemp15: <CPU On-Die Thermal Sensors> on cpu15
est15: <Enhanced SpeedStep Frequency Control> on cpu15
est: CPU supports Enhanced Speedstep, but is not recognized.
est: cpu_vendor GenuineIntel, msr 17
device_attach: est15 attach returned 6
coretemp16: <CPU On-Die Thermal Sensors> on cpu16
est16: <Enhanced SpeedStep Frequency Control> on cpu16
est: CPU supports Enhanced Speedstep, but is not recognized.
est: cpu_vendor GenuineIntel, msr 17
device_attach: est16 attach returned 6
coretemp17: <CPU On-Die Thermal Sensors> on cpu17
est17: <Enhanced SpeedStep Frequency Control> on cpu17
est: CPU supports Enhanced Speedstep, but is not recognized.
est: cpu_vendor GenuineIntel, msr 17
device_attach: est17 attach returned 6
coretemp18: <CPU On-Die Thermal Sensors> on cpu18
est18: <Enhanced SpeedStep Frequency Control> on cpu18
est: CPU supports Enhanced Speedstep, but is not recognized.
est: cpu_vendor GenuineIntel, msr 17
device_attach: est18 attach returned 6
coretemp19: <CPU On-Die Thermal Sensors> on cpu19
est19: <Enhanced SpeedStep Frequency Control> on cpu19
est: CPU supports Enhanced Speedstep, but is not recognized.
est: cpu_vendor GenuineIntel, msr 17
device_attach: est19 attach returned 6
coretemp20: <CPU On-Die Thermal Sensors> on cpu20
est20: <Enhanced SpeedStep Frequency Control> on cpu20
est: CPU supports Enhanced Speedstep, but is not recognized.
est: cpu_vendor GenuineIntel, msr 17
device_attach: est20 attach returned 6
coretemp21: <CPU On-Die Thermal Sensors> on cpu21
est21: <Enhanced SpeedStep Frequency Control> on cpu21
est: CPU supports Enhanced Speedstep, but is not recognized.
est: cpu_vendor GenuineIntel, msr 17
device_attach: est21 attach returned 6
coretemp22: <CPU On-Die Thermal Sensors> on cpu22
est22: <Enhanced SpeedStep Frequency Control> on cpu22
est: CPU supports Enhanced Speedstep, but is not recognized.
est: cpu_vendor GenuineIntel, msr 17
device_attach: est22 attach returned 6
coretemp23: <CPU On-Die Thermal Sensors> on cpu23
est23: <Enhanced SpeedStep Frequency Control> on cpu23
est: CPU supports Enhanced Speedstep, but is not recognized.
est: cpu_vendor GenuineIntel, msr 17
device_attach: est23 attach returned 6
ZFS filesystem version: 5
ZFS storage pool version: features support (5000)
Timecounters tick every 1.000 msec
freenas_sysctl: adding account.
freenas_sysctl: adding directoryservice.
freenas_sysctl: adding middlewared.
freenas_sysctl: adding network.
freenas_sysctl: adding services.
ipfw2 (+ipv6) initialized, divert enabled, nat enabled, default to accept, logging disabled
ipmi0: IPMI device rev. 0, firmware rev. 2.92, version 2.0
ipmi0: Number of channels 5
ipmi0: Attached watchdog
ugen4.1: <Intel UHCI root HUB> at usbus4
ugen2.1: <Intel EHCI root HUB> at usbus2
ugen1.1: <Intel UHCI root HUB> at usbus1
ugen5.1: <Intel EHCI root HUB> at usbus5
ugen0.1: <Intel UHCI root HUB> at usbus0
ugen3.1: <Intel UHCI root HUB> at usbus3
uhub0: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus4
uhub1: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus2
uhub2: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus3
uhub3: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus5
uhub4: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus1
uhub5: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus0
uhub0: 2 ports with 2 removable, self powered
uhub2: 2 ports with 2 removable, self powered
uhub4: 2 ports with 2 removable, self powered
uhub5: 2 ports with 2 removable, self powered
mps0: SAS Address for SATA device = 18202316a28a944e
mps0: SAS Address from SATA device = 18202316a28a944e
mps0: SAS Address for SATA device = 4575414dbba7c696
mps0: SAS Address from SATA device = 4575414dbba7c696
mps0: SAS Address for SATA device = 4575414dbeaec494
mps0: SAS Address from SATA device = 4575414dbeaec494
mps0: SAS Address for SATA device = 7385391e9fa79693
mps0: SAS Address from SATA device = 7385391e9fa79693
mps0: SAS Address for SATA device = 62721065d655b78
mps0: SAS Address from SATA device = 62721065d655b78
uhub1: 4 ports with 4 removable, self powered
uhub3: 4 ports with 4 removable, self powered
ugen2.2: <vendor 0x0424 product 0x2514> at usbus2
uhub6 on uhub1
uhub6: <vendor 0x0424 product 0x2514, class 9/0, rev 2.00/0.00, addr 2> on usbus2
uhub6: MTT enabled
uhub6: 3 ports with 3 removable, self powered
ugen3.2: <Avocent USB Composite Device-0> at usbus3
ukbd0 on uhub2
ukbd0: <Keyboard> on usbus3
kbd2 at ukbd0
ugen5.2: <Avocent USB Composite Device-1> at usbus5
umass0 on uhub3
umass0: <SCSI Transparent Interface 0> on usbus5
umass0: SCSI over Bulk-Only; quirks = 0x4100
umass0:4:0: Attached to scbus4
umass1 on uhub3
umass1: <SCSI Transparent Interface 1> on usbus5
umass1: SCSI over Bulk-Only; quirks = 0x4100
umass1:5:1: Attached to scbus5
da0 at mps0 bus 0 scbus0 target 10 lun 0
da0: <ATA OCZ CORE_SSD 0104> Fixed Direct Access SPC-4 SCSI device
da0: Serial Number DC3250000037
da0: 300.000MB/s transfers
da0: Command Queueing enabled
da0: 30560MB (62586880 512 byte sectors)
cd0 at ata2 bus 0 scbus1 target 0 lun 0
cd0: <TSSTcorp DVD+-RW TS-L633J D150> Removable CD-ROM SCSI device
cd0: Serial Number R8B06GMB700293
cd0: 150.000MB/s transfers (SATA 1.x, UDMA5, ATAPI 12bytes, PIO 8192bytes)
cd0: Attempt to query device size failed: NOT READY, Medium not present - tray closed
random: unblocking device.
da4 at mps0 bus 0 scbus0 target 14 lun 0
da4: <ATA WDC WD1003FBYX-0 1V01> Fixed Direct Access SPC-4 SCSI device
da4: Serial Number WD-WCAW31600347
da4: 300.000MB/s transfers
da4: Command Queueing enabled
da4: 953868MB (1953523055 512 byte sectors)
da2 at mps0 bus 0 scbus0 target 12 lun 0
da2: <ATA WDC WD15EURS-63S AB51> Fixed Direct Access SPC-4 SCSI device
da2: Serial Number WD-WCAZAC874268
da2: 300.000MB/s transfers
da2: Command Queueing enabled
da2: 1430799MB (2930277168 512 byte sectors)
da2: quirks=0x8<4K>
da1 at mps0 bus 0 scbus0 target 11 lun 0
da1: <ATA WDC WD15EURS-63S AB51> Fixed Direct Access SPC-4 SCSI device
da1: Serial Number WD-WCAZAC877946
da1: 300.000MB/s transfers
da1: Command Queueing enabled
da1: 1430799MB (2930277168 512 byte sectors)
da1: quirks=0x8<4K>
da3 at mps0 bus 0 scbus0 target 13 lun 0
da3: <ATA ST31000528AS CC34> Fixed Direct Access SPC-4 SCSI device
da3: Serial Number 6VP088FS
da3: 300.000MB/s transfers
da3: Command Queueing enabled
da3: 953868MB (1953523055 512 byte sectors)
Trying to mount root from zfs:freenas-boot/ROOT/11.2-U7 []...
cd1 at umass-sim1 bus 1 scbus5 target 0 lun 0
cd1: <iDRAC Virtual CD 0323> Removable CD-ROM SCSI device
cd1: 40.000MB/s transfers
cd1: Attempt to query device size failed: NOT READY, Medium not present
cd1: quirks=0x10<10_BYTE_ONLY>
da5 at umass-sim0 bus 0 scbus4 target 0 lun 0
da5: <iDRAC LCDRIVE 0323> Removable Direct Access SCSI device
da5: 40.000MB/s transfers
da5: Attempt to query device size failed: NOT READY, Medium not present
da5: quirks=0x2<NO_6_BYTE>
GEOM_MIRROR: Device mirror/swap0 launched (2/2).
GEOM_MIRROR: Device mirror/swap1 launched (2/2).
GEOM_ELI: Device mirror/swap0.eli created.
GEOM_ELI: Encryption: AES-XTS 128
GEOM_ELI: Crypto: hardware
GEOM_ELI: Device mirror/swap1.eli created.
GEOM_ELI: Encryption: AES-XTS 128
GEOM_ELI: Crypto: hardware
hwpmc: SOFT/16/64/0x67<INT,USR,SYS,REA,WRI> TSC/1/64/0x20<REA> IAP/4/48/0x3ff<INT,USR,SYS,EDG,THR,REA,WRI,INV,QUA,PRC> IAF/3/48/0x67<INT,USR,SYS,REA,WRI> UCP/8/48/0x3f8<EDG,THR,REA,WRI,INV,QUA,PRC> UCF/1/48/0x60<REA,WRI>
lagg0: link state changed to DOWN
ums0 on uhub2
ums0: <Mouse> on usbus3
ums0: 3 buttons and [Z] coordinates ID=0
bce0: link state changed to UP
lagg0: link state changed to UP
bce1: Gigabit link up!
bce1: link state changed to UP
bce0: Gigabit link up!
bce0: Gigabit link up!
bce0: Gigabit link up!
bridge0: Ethernet address: 02:a9:90:b3:aa:00
epair0a: Ethernet address: 02:c8:10:00:06:0a
epair0b: Ethernet address: 02:c8:10:00:07:0b
epair0a: link state changed to UP
epair0b: link state changed to UP
epair0a: changing name to 'vnet0:1'
bce0: promiscuous mode enabled
bce1: promiscuous mode enabled
lagg0: promiscuous mode enabled
bridge0: link state changed to UP
vnet0:1: promiscuous mode enabled
epair1a: Ethernet address: 02:c8:10:00:07:0a
epair1b: Ethernet address: 02:c8:10:00:08:0b
epair1a: link state changed to UP
epair1b: link state changed to UP
epair1a: changing name to 'vnet0:2'
epair1b: changing name to 'epair0b'
vnet0:2: promiscuous mode enabled
epair2a: Ethernet address: 02:c8:10:00:08:0a
epair2b: Ethernet address: 02:c8:10:00:09:0b
epair2a: link state changed to UP
epair2b: link state changed to UP
epair2a: changing name to 'vnet0:3'
epair2b: changing name to 'epair0b'
vnet0:3: promiscuous mode enabled
epair3a: Ethernet address: 02:c8:10:00:09:0a
epair3b: Ethernet address: 02:c8:10:00:0a:0b
epair3a: link state changed to UP
epair3b: link state changed to UP
epair3a: changing name to 'vnet0:4'
epair3b: changing name to 'epair0b'
vnet0:4: promiscuous mode enabled
epair4a: Ethernet address: 02:c8:10:00:0a:0a
epair4b: Ethernet address: 02:c8:10:00:0b:0b
epair4a: link state changed to UP
epair4b: link state changed to UP
epair4a: changing name to 'vnet0:5'
epair4b: changing name to 'epair0b'
vnet0:5: promiscuous mode enabled
epair5a: Ethernet address: 02:c8:10:00:0b:0a
epair5b: Ethernet address: 02:c8:10:00:0c:0b
epair5a: link state changed to UP
epair5b: link state changed to UP
epair5a: changing name to 'vnet0:6'
epair5b: changing name to 'epair0b'
vnet0:6: promiscuous mode enabled
Similar threads
