Post upgrade disk replacement

[gwyden]

We just completed an upgrade to 8.3.2 and this weekend a disk failed. I have removed the offending disk but when i go Storage -> View Volumes -> Volume Status ->Broken disk -> Replace I get an error dialog that says "Sorry, an error occurred" at this point I am at a loss to see what the actual error is. Under settings the "Show tracebacks in case of fatal errors" is checked yet i am not seeing it anywhere.

 

[dlavigne]

What is the layout of the disks (e.g. filesystem and type of RAID/Z)? If ZFS, post the output of "zpool status".

 

[gwyden]

I had to manually run the zpool replace to get the disk replaced. thus you will see ada5p2 instad of a gptid in raidz2-2

Code:

[root@freenas-secondary] ~# zpool status
pool: RSPpool
state: ONLINE
scan: resilvered 494G in 3h45m with 0 errors on Sun Oct 27 12:34:41 2013
config:
 
NAME STATE READ WRITE CKSUM
RSPpool ONLINE 0 0 0
raidz2-0 ONLINE 0 0 0
gptid/abb66f29-e0c8-11e1-b322-0025906511a6 ONLINE 0 0 0
gptid/ac1cf1d3-e0c8-11e1-b322-0025906511a6 ONLINE 0 0 0
gptid/ac84ef34-e0c8-11e1-b322-0025906511a6 ONLINE 0 0 0
gptid/acebb4ef-e0c8-11e1-b322-0025906511a6 ONLINE 0 0 0
gptid/ad53a336-e0c8-11e1-b322-0025906511a6 ONLINE 0 0 0
gptid/adbabead-e0c8-11e1-b322-0025906511a6 ONLINE 0 0 0
raidz2-1 ONLINE 0 0 0
gptid/b5025520-e0c7-11e1-b322-0025906511a6 ONLINE 0 0 0
gptid/b54188e8-e0c7-11e1-b322-0025906511a6 ONLINE 0 0 0
gptid/b5846831-e0c7-11e1-b322-0025906511a6 ONLINE 0 0 0
gptid/b5c374a2-e0c7-11e1-b322-0025906511a6 ONLINE 0 0 0
gptid/b6005528-e0c7-11e1-b322-0025906511a6 ONLINE 0 0 0
gptid/a5c782e6-f6a1-11e1-b322-0025906511a6 ONLINE 0 0 0
raidz2-2 ONLINE 0 0 0
gptid/b678dfe7-e0c7-11e1-b322-0025906511a6 ONLINE 0 0 0
gptid/b6c2150f-e0c7-11e1-b322-0025906511a6 ONLINE 0 0 0
ada5p2 ONLINE 0 0 0
gptid/b74c19d4-e0c7-11e1-b322-0025906511a6 ONLINE 0 0 0
gptid/b78bb964-e0c7-11e1-b322-0025906511a6 ONLINE 0 0 0
gptid/b7cadf7a-e0c7-11e1-b322-0025906511a6 ONLINE 0 0 0
raidz2-3 ONLINE 0 0 0
gptid/b80dc547-e0c7-11e1-b322-0025906511a6 ONLINE 0 0 0
gptid/b850678d-e0c7-11e1-b322-0025906511a6 ONLINE 0 0 0
gptid/b88c85a8-e0c7-11e1-b322-0025906511a6 ONLINE 0 0 0
gptid/b8cae63e-e0c7-11e1-b322-0025906511a6 ONLINE 0 0 0
gptid/b90a8849-e0c7-11e1-b322-0025906511a6 ONLINE 0 0 0
gptid/b947110a-e0c7-11e1-b322-0025906511a6 ONLINE 0 0 0
raidz2-4 ONLINE 0 0 0
gptid/b98998f5-e0c7-11e1-b322-0025906511a6 ONLINE 0 0 0
gptid/b9c78911-e0c7-11e1-b322-0025906511a6 ONLINE 0 0 0
gptid/ba05f51c-e0c7-11e1-b322-0025906511a6 ONLINE 0 0 0
gptid/ba4de4c6-e0c7-11e1-b322-0025906511a6 ONLINE 0 0 0
gptid/ba903bef-e0c7-11e1-b322-0025906511a6 ONLINE 0 0 0
gptid/bad3f22e-e0c7-11e1-b322-0025906511a6 ONLINE 0 0 0
raidz2-5 ONLINE 0 0 0
gptid/bb17b65f-e0c7-11e1-b322-0025906511a6 ONLINE 0 0 0
gptid/bb5975d9-e0c7-11e1-b322-0025906511a6 ONLINE 0 0 0
gptid/bb98b7fd-e0c7-11e1-b322-0025906511a6 ONLINE 0 0 0
gptid/bbdbc7a1-e0c7-11e1-b322-0025906511a6 ONLINE 0 0 0
gptid/bc1e3df5-e0c7-11e1-b322-0025906511a6 ONLINE 0 0 0
gptid/bc61ee1d-e0c7-11e1-b322-0025906511a6 ONLINE 0 0 0
logs
mirror-6 ONLINE 0 0 0
gptid/e473b863-e9db-11e2-afab-0025906511a6 ONLINE 0 0 0
gptid/e5b67b6f-e9db-11e2-afab-0025906511a6 ONLINE 0 0 0
cache
gptid/ea33f84b-e9db-11e2-afab-0025906511a6 ONLINE 0 0 0
gptid/ebd97c34-e9db-11e2-afab-0025906511a6 ONLINE 0 0 0
 
errors: No known data errors

 

[paleoN]

I had to manually run the zpool replace to get the disk replaced. thus you will see ada5p2 instad of a gptid in raidz2-2

A reboot will "fix" that. FYI, you can specify the GPTID in the zpool replace command. I would suggest you setup SSH as well. The web shell doesn't seem to retain formatting properly.

 

[gwyden]

That is good to know about a reboot and it will happen eventually just not in the immediate future. As far as ssh that was how i collected that data it appears there some some translation error when i submitted it to the forum. I am still concerned that i can not replace a disk via the UI.

 

[paleoN]

I am still concerned that i can not replace a disk via the UI.

Typically, /var/log/messages would have additional information. It may be too late to tell at this point. Do you have hot-swap hardware? It's possible something still had one of the GEOMs for that device open.

 

[gwyden]

There is no additional information in /var/log/messages i can reproduce this error at will.

 

[paleoN]

i can reproduce this error at will.

If you can reproduce then it's a good candidate for a bug report assuming you're following the appropriate steps.