Hi,
I got one degraded drive. However, I am not sure how to identify which one is bad. Here is the result of "zpool status" command:
status: One or more devices has experienced an unrecoverable error. An
attempt was made to correct the error. Applications are unaffected.
action: Determine if the device needs to be replaced, and clear the errors
using 'zpool clear' or replace the device with 'zpool replace'.
see: http://illumos.org/msg/ZFS-8000-9P
scan: scrub repaired 0 in 2h4m with 0 errors on Mon Apr 24 04:58:59 2017
config:
NAME STATE READ WRITE CKSUM
NAS6 DEGRADED 0 0 0
mirror-0 DEGRADED 0 0 0
gptid/ebd808f0-b5a0-11e4-874a-bc5ff4754cf9 ONLINE 0 0 0
gptid/a8693d0a-b58d-11e4-9668-bc5ff4754cf9 DEGRADED 0 0 0 too many errors
mirror-1 ONLINE 0 0 0
gptid/c0cb7b6f-d41e-11e4-b5fe-bc5ff4754cf9 ONLINE 0 0 0 block size: 512B configured, 4096B native
gptid/fad12180-d42d-11e4-bd7b-bc5ff4754cf9 ONLINE 0 0 0 block size: 512B configured, 4096B native
errors: No known data errors
Image of the drive list is attached.
Since "zpools status" does not list serial numbers, how do I know which drive to replace?
Thank you.
Gasha
I got one degraded drive. However, I am not sure how to identify which one is bad. Here is the result of "zpool status" command:
status: One or more devices has experienced an unrecoverable error. An
attempt was made to correct the error. Applications are unaffected.
action: Determine if the device needs to be replaced, and clear the errors
using 'zpool clear' or replace the device with 'zpool replace'.
see: http://illumos.org/msg/ZFS-8000-9P
scan: scrub repaired 0 in 2h4m with 0 errors on Mon Apr 24 04:58:59 2017
config:
NAME STATE READ WRITE CKSUM
NAS6 DEGRADED 0 0 0
mirror-0 DEGRADED 0 0 0
gptid/ebd808f0-b5a0-11e4-874a-bc5ff4754cf9 ONLINE 0 0 0
gptid/a8693d0a-b58d-11e4-9668-bc5ff4754cf9 DEGRADED 0 0 0 too many errors
mirror-1 ONLINE 0 0 0
gptid/c0cb7b6f-d41e-11e4-b5fe-bc5ff4754cf9 ONLINE 0 0 0 block size: 512B configured, 4096B native
gptid/fad12180-d42d-11e4-bd7b-bc5ff4754cf9 ONLINE 0 0 0 block size: 512B configured, 4096B native
errors: No known data errors
Image of the drive list is attached.
Since "zpools status" does not list serial numbers, how do I know which drive to replace?
Thank you.
Gasha