memtest86

  1. M

    ECC working? Single/multi bit? Testing ECC RAM?

    Hi! I'm building my second FreeNAS server. (Aiming at a low power NAS that can run 24/7/365 without I feel it's using too much electricity. My old NAS uses >100 W in idle.) Relevant to this thread is: Motherboard: Supermicro X11SSM-F CPU: Intel Pentium G4560 RAM: 1 x Samsung M391A2K43BB1-CRC...
    • Mirax
    • Thread
    • ecc memtest86
    • Replies: 8
    • Forum: Hardware
  2. K

    Memtest86 - Running on an existing zfs pool with data

    hi there! Due to some hardware replacements, I am planning to run Memtest86 on my existing freenas server (6TB data, 8gb RAM). So far the system has been running ok (though with non-ECC Ram, since my motherboard doesnt support it). Before I run this test, I just wanted to be sure that running...
  3. Monkey_Demon

    Breakin & Memtest86

    Uncle Fester's FreeNAS 9.10 Configuration Guide recommends using Breakin for processor validation and MemTest86+ for memory validation. But the web site for Breakin says it does a "full processor and memory test" (my emphasis), while MemTest86 has four CPU modes under which to run the memory...
    • Monkey_Demon
    • Thread
    • breakin memory validation memtest86 processor validation
    • Replies: 21
    • Forum: Hardware
Top