A
Anthonymfry256
Guest
Hey, I'm building a FreeNAS system and would like any recommendations, based on the hardware i have chosen.
Below is choice of the hardware i'm considering for the build. I plan to have a 24 drive case running with 8 drive in 3 vdevs with raidz3
CASE:
Norco-4224
HARD DRIVES:
Western Digital WD Red 4TB WD40EFRX (x8)
MOTHERBOARD:
Supermicro X9SRH LGA 2011 Intel C602J DDR3 SATA3 & SAS2 V&2GBE ATC Server Motherboard Price: $516
• Mfr Part Number: X9SRH-7TF-B
• CPU: LGA2011
o Supports Intel Xeon E5-2600/E5-1600 Processors
o Supports up to 8 cores
o Supports up to 135W TDP
• Chipset: Intel C602J
• Memory: 8x 240pin DDR3-1600/1333/1066 DIMM Slots, Supports up to 256GB ECC/REG Memory or up to 64GB ECC/Non-ECC Un-buffered Memory
• Slots: 2x PCI-Express 3.0 x16 Slots (one runs at x8), 1x PCI-Express 2.0 x8 Slot (runs at x4), 2x PCI-32 Slots
• SATA: 2x SATA3 Ports, 4x SATA2 Ports, Support RAID 0, 1, 5, 10
• SAS: 8x SAS2 Ports, Support RAID 0, 1, 10
• Video: Matrox G200eW Graphics Controller w/ 16MB DDR2 Video Memory
• LAN: Intel X540 Dual Port 10-Gigabit Ethernet Controller; 1x Realtek RTL8201N PHY (dedicated IPMI)
• Ports: 9x USB 2.0 Ports (2 rear, 6 via headers, 1 Type A), 1x VGA Port, 1x PS/2 Keyboard Port, 1x PS/2 Mouse Port, 2x Serial Ports (1 rear, 1 via header), 2x RJ45 LAN Ports, 1x RJ45 Dedicated IPMI LAN Port
• Form Factor: ATX, 12.0 x 9.6 inch / 30.5 x 24.4 cm
• RoHS Compliant
CPU:
Intel® Xeon® Processor E5-1620
(10M Cache, 3.60 GHz, 0.0 GT/s Intel® QPI)
HBA:
IBM Serve RAID M1015 (x2 and flashed with LSII 9211-8 IT mode)
MEMORY:
Samsung Memory 8GB DDR3-1333 ECC REG (x2) = 16GB expand as need.
Below is choice of the hardware i'm considering for the build. I plan to have a 24 drive case running with 8 drive in 3 vdevs with raidz3
CASE:
Norco-4224
HARD DRIVES:
Western Digital WD Red 4TB WD40EFRX (x8)
MOTHERBOARD:
Supermicro X9SRH LGA 2011 Intel C602J DDR3 SATA3 & SAS2 V&2GBE ATC Server Motherboard Price: $516
• Mfr Part Number: X9SRH-7TF-B
• CPU: LGA2011
o Supports Intel Xeon E5-2600/E5-1600 Processors
o Supports up to 8 cores
o Supports up to 135W TDP
• Chipset: Intel C602J
• Memory: 8x 240pin DDR3-1600/1333/1066 DIMM Slots, Supports up to 256GB ECC/REG Memory or up to 64GB ECC/Non-ECC Un-buffered Memory
• Slots: 2x PCI-Express 3.0 x16 Slots (one runs at x8), 1x PCI-Express 2.0 x8 Slot (runs at x4), 2x PCI-32 Slots
• SATA: 2x SATA3 Ports, 4x SATA2 Ports, Support RAID 0, 1, 5, 10
• SAS: 8x SAS2 Ports, Support RAID 0, 1, 10
• Video: Matrox G200eW Graphics Controller w/ 16MB DDR2 Video Memory
• LAN: Intel X540 Dual Port 10-Gigabit Ethernet Controller; 1x Realtek RTL8201N PHY (dedicated IPMI)
• Ports: 9x USB 2.0 Ports (2 rear, 6 via headers, 1 Type A), 1x VGA Port, 1x PS/2 Keyboard Port, 1x PS/2 Mouse Port, 2x Serial Ports (1 rear, 1 via header), 2x RJ45 LAN Ports, 1x RJ45 Dedicated IPMI LAN Port
• Form Factor: ATX, 12.0 x 9.6 inch / 30.5 x 24.4 cm
• RoHS Compliant
CPU:
Intel® Xeon® Processor E5-1620
(10M Cache, 3.60 GHz, 0.0 GT/s Intel® QPI)
HBA:
IBM Serve RAID M1015 (x2 and flashed with LSII 9211-8 IT mode)
MEMORY:
Samsung Memory 8GB DDR3-1333 ECC REG (x2) = 16GB expand as need.