Static Routes Widget
1 minute read.
The Static Routes widget on the Network screen displays static IP addresses configured as static routes. Use this to manually enter routes to network destinations outside the TrueNAS network so the router can send packets to a destination network.
TrueNAS does not have defined static routes by default. If you need a static route to reach portions of the network, add the route by going to Network and clicking Add in the Static Routes window.
| Setting | Description |
|---|---|
| Destination | Enter the destination IP address using the format A.B.C.D/E where E is the CIDR mask. This is a required field. |
| Gateway | Enter the IP address of the gateway. This is a required field. |
| Description | Enter notes or an identifier describing the route. |
Use Save to add the static route.