IPMI Namespace IPMI Commands Interactive Argument Editor (TUI) Chassis Command MC Command Sel Command Sensors Command IPMI Namespace The ipmi namespace has four commands and is based on IPMI management functions found in the SCALE API and web UI. It provides access to ipmi service management methods through the ipmi commands.
IPMI Commands The following ipmi commands allow you to view and edit ipmi service properties.
You can enter commands from the main CLI prompt or from the ipmi namespace prompt.
IPMI Configuration Screen The IPMI widget on the Network screen shows the available IPMI channels.
Figure 1: Network screen with IPMI channels. Click to open the IPMI manager in a new browser tab where users can log into the IPMI web interface.
Click edit to go to the IPMI configuration screen.
Click Show Events to show the IPMI Events log.
Figure 2: IPMI Events IPMI requires compatible hardware! Refer to your hardware documentation to determine if the TrueNAS web interface has IPMI options.
IPMI Options IPMI requires compatible hardware! Refer to your hardware documentation to determine if the TrueNAS web interface has IPMI options. Many [TrueNAS Storage Arrays](https://www.truenas.com/docs/hardware/ have a built-in out-of-band management port that provides side-band management should the system become unavailable through the web interface.
Intelligent Platform Management Interface (IPMI) allows users to check the log, access the BIOS setup, and boot the system without physical access. IPMI also enables users to remotely access the system to assist with configuration or troubleshooting issues.
