LSI 9300-xx Firmware Update

Updating the LSI 9300-xx Firmware.

  1 minute read

Firmware Information

Servers with the LSI 9300 HBA may experience some performance issues causing the controller to reset when using SATA HDDs.

iXsystems has worked with Broadcom to provide a firmware update that resolves the controller reset issue. If you have the LSI 9300 HBA with firmware version 16.00.12.00 or earlier installed and would like to resolve the occasional controller reset from this issue, follow these instructions. Please note that the firmware update is only available from iXsystems.”

Please Note: This problem only applies to firmware versions below 16.00.12.00 and only affects SATA drives. SAS drives are not affected.

There was an error displaying this PDF, please click here to download the file.
Last modified August 28, 2020: Update lsi9300-timeout.md (e9546768)