LSI 9300-xx Firmware Update
1 minute read.Last Modified 2021-03-12 08:47 EST
Servers with the LSI 9300 HBA may experience some performance issues causing the controller to reset when using SATA HDDs.
iXsystems has worked with Broadcom to provide a firmware update that resolves the controller reset issue. If you have the LSI 9300 HBA with firmware version 16.00.12.00 or earlier installed and would like to resolve the occasional controller reset from this issue, follow these instructions. Please note that the firmware update is only available from iXsystems.”
This problem only applies to firmware versions below 16.00.12.00 and only affects SATA drives. SAS drives are not affected.