(408) 943-4100               V   Commercial Support Toggle between Light and Dark mode

Share Creation

  5 minute read.

Last Modified 2021-08-17 12:50 EDT

Creating a Network File System (NFS) share on TrueNAS gives the benefit of making lots of data easily available for anyone with share access. Depending how the share is configured, users accessing the share can be restricted to read or write privileges.

To create a new share, make sure a dataset is available with all the data for sharing.

Creating an NFS Share

Go to Sharing > Unix Shares (NFS) and click ADD.

Services NFS Add

Use the file browser to select the dataset to be shared. An optional Description can be entered to help identify the share. Clicking SUBMIT creates the share. At the time of creation, you can select ENABLE SERVICE for the service to start and to automatically start after any reboots. If you wish to create the share but not immediately enable it, select CANCEL.

Services NFS Add Service Enable

Services NFS Service Enable Success

NFS Share Settings

Pathfile browserType or browse to the full path to the pool or dataset to share. Click ADD to configure multiple paths.
DescriptionstringEnter any notes or reminders about the share.
All dirscheckboxSet to allow the client to mount any subdirectory within the Path. Leaving disabled only allows clients to mount the Path endpoint.
QuietcheckboxEnabling inhibits some syslog diagnostics to avoid error messages. See exports(5) for examples. Disabling allows all syslog diagnostics, which can lead to additional cosmetic error messages.
EnabledcheckboxEnable this NFS share. Unset to disable this NFS share without deleting the configuration.

Opening the ADVANCED OPTIONS allows tuning the share access permissions and defining authorized networks.


Read OnlycheckboxProhibits writing to the share when set.
Maproot Userstring or drop downSelect a user to apply that user’s permissions to the root user.
Maproot Groupstring or drop downSelect a group to apply that group’s permissions to the root user.
Mapall Userstring or drop downPermissions for the chosen user applied to all clients.
Mapall Groupstring or drop downPermissions for the chosen group are applied to all clients.
Authorized NetworksIP addressEnter an allowed network in network/mask CIDR notation. Click ADD to define another authorized network. Defining an authorized network restricts access to all other networks. Leave empty to allow all networks.
Authorized Hosts and IP addressesstringEnter a hostname or IP address to allow that system access to the NFS share. Click ADD to define another allowed system. Defining authorized systems restricts access to all other systems. Leave field empty to allow all systems access to the share.

To edit an existing NFS share, go to Sharing > Unix Shares (NFS) and click > Edit. The options available are identical to the share creation options.

Configure the NFS Service

To begin sharing the data, go to Services and click the NFS toggle. If you want NFS sharing to activate immediately after TrueNAS boots, set Start Automatically.

NFS service settings can be configured by clicking (Configure).

Services NFS Options

Number of serversintegerSpecify how many servers to create. Increase if NFS client responses are slow. Keep this less than or equal to the number of CPUs reported by sysctl -n kern.smp.cpus to limit CPU context switching.
Bind IP Addressesdrop downSelect IP addresses to listen to for NFS requests. Leave empty for NFS to listen to all available addresses.
Enable NFSv4checkboxSet to switch from NFSv3 to NFSv4.
NFSv3 ownership model for NFSv4checkboxSet when NFSv4 ACL support is needed without requiring the client and the server to sync users and groups.
Require Kerberos for NFSv4checkboxSet to force NFS shares to fail if the Kerberos ticket is unavailable.
Serve UDP NFS clientscheckboxSet if NFS clients need to use the User Datagram Protocol (UDP).
Allow non-root mountcheckboxSet only if required by the NFS client. Set to allow serving non-root mount requests.
Support >16 groupscheckboxSet when a user is a member of more than 16 groups. This assumes group membership is configured correctly on the NFS server.
Log mountd(8) requestscheckboxSet to log mountd syslog requests.
Log rpc.statd(8) and rpc.lockd(8)checkboxSet to log rpc.statd and rpc.lockd syslog requests.
mountd(8) bind portintegerEnter a number to bind mountd only to that port.
rpc.statd(8) bind portintegerEnter a number to bind rpc.statd only to that port.
rpc.lockd(8) bind portintegerEnter a number to bind rpc.lockd only to that port.

Unless a specific setting is needed, it is recommended to use the default settings for the NFS service. When TrueNAS is already connected to Active Directory, setting NFSv4 and Require Kerberos for NFSv4 also requires a Kerberos Keytab.

Connecting to the NFS Share

Although you can connect to an NFS share with various operating systems, it is recommended to use a Linux/Unix operating system. First, download the nfs-common kernel module. This can be done using the package manager of the installed distribution. For example, on Ubuntu/Debian, enter sudo apt-get install nfs-common in the terminal.

After installing the module, connect to an NFS share by entering sudo mount -t nfs {IPaddressOfTrueNASsystem}:{path/to/nfsShare} {localMountPoint}. In the above example, {IPaddressOfTrueNASsystem} is the IP address of the remote TrueNAS system that contains the NFS share, {path/to/nfsShare} is the path to the NFS share on the TrueNAS system, and {localMountPoint} is a local directory on the host system configured for the mounted NFS share. For example, sudo mount -t nfs /mnt will mount the NFS share photoDataset to the local directory /mnt.

By default, anyone that connects to the NFS share only has the read permission. To change the default permissions, edit the share, open the Advanced Options, and change the Access settings.

ESXI 6.7 or later is required for read/write functionality with NFSv4 shares.