So I had a double whammy this past weekend where a drive must have locked up causing the whole system to freeze up so I had to hard reboot it, after I did that the Zpool had a status of unknown see bellow
Given that the disk was failing and it wouldn't allow the system to boot up, I went ahead and replaced it with a new drive (ada3) however I can't get the zpool online to be able to save some data off it, am I totally screwed here? I've tried zpool force but of course that fails.
Any help would be extremely appreciated it, this is Free-nas version 9.2.1.8 on a Intel SS4200 device.
Thanks
Code:
# zpool import pool: Mount_data id: 6719849262883214412 state: UNAVAIL status: One or more devices are missing from the system. action: The pool cannot be imported. Attach the missing devices and try again. see: http://illumos.org/msg/ZFS-8000-6X config: Mount_data UNAVAIL missing device raidz1-0 ONLINE ada0 ONLINE ada3 ONLINE gptid/73fc1002-5ea1-11e3-b573-00151731fa8b ONLINE Additional devices are known to be part of this pool, though their exact configuration cannot be determined.
Given that the disk was failing and it wouldn't allow the system to boot up, I went ahead and replaced it with a new drive (ada3) however I can't get the zpool online to be able to save some data off it, am I totally screwed here? I've tried zpool force but of course that fails.
Any help would be extremely appreciated it, this is Free-nas version 9.2.1.8 on a Intel SS4200 device.
Thanks