wanders78746
Cadet
- Joined
- Dec 28, 2023
- Messages
- 7
Motherboard: Gigabyte B150N-GSM model F1 (BIOS vintage 2015)
NVME drive: 128GB M2 NVME drive (model CL1-3D128-Q11, generic)
Situation: An identical-to-the-above NVME drive was failing on my TrueNAS Core system. I replaced with a (formatted and partitioned) NVME drive and I'm trying to install TrueNAS Core 13.0-U6.1 from a USB drive. I boot to the drive and the installer sees my pool HDs and the USB drive that I booted from, but does not see the NVME drive. I've gone into the BIOS and removed all boot options except the USB drive. The BIOS sees the NVME drive, no problem, but the installer does not.
Do I need to remove the partitions on the NVME drive? If so, can I do this from the installer system? I really would rather not have to extract my NVME drive, as it mounts under the motherboard (thanks, Gigabyte) and is a PITA to get to.
What am I doing wrong?
NVME drive: 128GB M2 NVME drive (model CL1-3D128-Q11, generic)
Situation: An identical-to-the-above NVME drive was failing on my TrueNAS Core system. I replaced with a (formatted and partitioned) NVME drive and I'm trying to install TrueNAS Core 13.0-U6.1 from a USB drive. I boot to the drive and the installer sees my pool HDs and the USB drive that I booted from, but does not see the NVME drive. I've gone into the BIOS and removed all boot options except the USB drive. The BIOS sees the NVME drive, no problem, but the installer does not.
Do I need to remove the partitions on the NVME drive? If so, can I do this from the installer system? I really would rather not have to extract my NVME drive, as it mounts under the motherboard (thanks, Gigabyte) and is a PITA to get to.
What am I doing wrong?