Yet another first build hardware question

[kcsims]

Just looking to see if the following, NIC, CF card, and CF to IDE will all play nice with FreeNAS.
Intel EXPI9301CTBLK Network Adapter 10/ 100/ 1000Mbps PCI-Express 1 x RJ45
http://www.newegg.com/Product/Product.aspx?Item=N82E16833106033

Transcend 2GB Compact Flash (CF) Flash Card Model TS2GCF133
http://www.newegg.com/Product/Product.aspx?Item=N82E16820208338

SYBA SD-CF-IDE-DI IDE to Compact Flash Adapter ( Direct Insertion Mode )
http://www.newegg.com/Product/Product.aspx?Item=N82E16822998003

Any input, better routes, etcs, please let me know.

 

[marcusmarcus]

Not sure on the NIC, but the CF and the CF to IDE adapter are the exact same ones I got and my FreeNAS build is running perfectly off them. The only problem I had with them was in the case I have it was blocking the SATA ports on the harddrive and it blocked me from putting the cover back on my case as well. I got an IDE extension cable and repositioned the card and adapter out of the way and it still boots up and runs just fine.
This is the adapter I got if you have a similar issue with that: http://www.pccables.com/01811.html