Tino Zidore
Dabbler
- Joined
- Nov 23, 2015
- Messages
- 30
Hi
I have 2 FreeNAS servers running FreeNAS 11-U4.
One is based on the Supermicro X10DRi-T and the other on Supermicro X9DRW-iF.
Both have 256 GB RAM.
The X9DRW-iF server has a JBOD chassis with 45 x 4 TB disks zpooled into 22 vdevs with 2 disks and a LSI 9207-8e.
Question 1:
Does it make sense to attach a Kingston Hyper Savage SSD disk of 960 GB as L2ARC?
The X10DRi-T server has an internal HBA LSI 9300-8e with 10 x Samsung EVO 850 1 TB zpooled as striped(just for speed, no security)
Question 2:
Does it make sense to attach an Intel P3600 PCIE SSD disk of 800 GB as L2ARC?
Additional questions:
How can I test this on the server?
I have 2 FreeNAS servers running FreeNAS 11-U4.
One is based on the Supermicro X10DRi-T and the other on Supermicro X9DRW-iF.
Both have 256 GB RAM.
The X9DRW-iF server has a JBOD chassis with 45 x 4 TB disks zpooled into 22 vdevs with 2 disks and a LSI 9207-8e.
Question 1:
Does it make sense to attach a Kingston Hyper Savage SSD disk of 960 GB as L2ARC?
The X10DRi-T server has an internal HBA LSI 9300-8e with 10 x Samsung EVO 850 1 TB zpooled as striped(just for speed, no security)
Question 2:
Does it make sense to attach an Intel P3600 PCIE SSD disk of 800 GB as L2ARC?
Additional questions:
How can I test this on the server?
Last edited by a moderator: