Ericloewe, I got the latest firmware on the card. Unfortunately, I didn't check backplane's firmware and I don't have access to SC backplane firmwares.
Code:
smartctl -a -r ioctl /dev/da6
smartctl 7.0 2018-12-30 r4883 [FreeBSD 11.3-RELEASE-p7 amd64] (local build)
Copyright (C) 2002-18, Bruce Allen, Christian Franke, www.smartmontools.org
[inquiry: 12 00 00 00 24 00 ]
CAM status=0x1, SCSI status=0x0, resid=0x0
status=0x0
[inquiry: 12 01 00 00 fc 00 ]
CAM status=0x1, SCSI status=0x0, resid=0xe8
status=0x0
[inquiry: 12 00 00 00 24 00 ]
CAM status=0x1, SCSI status=0x0, resid=0x0
status=0x0
=== START OF INFORMATION SECTION ===
Vendor: HP
Product: MB6000FEDAU
Revision: HPD7
Compliance: SPC-4
[read capacity(16): 9e 10 00 00 00 00 00 00 00 00 00 00 00 20 00 00 ]
CAM status=0x1, SCSI status=0x0, resid=0x0
status=0x0
User Capacity: 6,001,175,126,016 bytes [6.00 TB]
Logical block size: 512 bytes
[inquiry: 12 01 b1 00 40 00 ]
CAM status=0x1, SCSI status=0x0, resid=0x0
status=0x0
Rotation Rate: 7200 rpm
Form Factor: 3.5 inches
[mode sense(6): 1a 00 1c 00 40 00 ]
CAM status=0x1, SCSI status=0x0, resid=0x28
status=0x0
[mode sense(6): 1a 00 5c 00 40 00 ]
CAM status=0x1, SCSI status=0x0, resid=0x28
status=0x0
[inquiry: 12 01 83 00 fc 00 ]
CAM status=0x1, SCSI status=0x0, resid=0xb0
status=0x0
Logical Unit id: 0x5000cca2326c3dec
[inquiry: 12 01 80 00 fc 00 ]
CAM status=0x1, SCSI status=0x0, resid=0xe8
status=0x0
Serial number: 1EHXJDLH
Device type: disk
Transport protocol: SAS (SPL-3)
Local Time is: Wed Apr 15 00:38:12 2020 PDT
[test unit ready: 00 00 00 00 00 00 ]
CAM status=0x1, SCSI status=0x0, resid=0x0
status=0x0
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
Temperature Warning: Enabled
=== START OF READ SMART DATA SECTION ===
[log sense: 4d 00 40 00 00 00 00 00 04 00 ]
CAM status=0x1, SCSI status=0x0, resid=0x0
status=0x0
[log sense: 4d 00 40 00 00 00 00 00 1a 00 ]
CAM status=0x1, SCSI status=0x0, resid=0x1
status=0x0
[log sense: 4d 00 40 ff 00 00 00 3e fc 00 ]
CAM status=0x8c, SCSI status=0x2, resid=0x3efc
sense_len=0x20, sense_resid=0x0
status=0x2: [desc] sense_key=0x5 asc=0x24 ascq=0x0
Log Sense for supported pages and subpages failed [unsupported field in scsi command]
[log sense: 4d 00 6f 00 00 00 00 00 04 00 ]
CAM status=0x1, SCSI status=0x0, resid=0x0
status=0x0
[log sense: 4d 00 6f 00 00 00 00 00 5c 00 ]
CAM status=0x1, SCSI status=0x0, resid=0x0
status=0x0
[request sense: 03 00 00 00 12 00 ]
CAM status=0x1, SCSI status=0x0, resid=0x0
status=0x0
[log sense: 4d 00 4d 00 00 00 00 00 04 00 ]
CAM status=0x1, SCSI status=0x0, resid=0x0
status=0x0
[log sense: 4d 00 4d 00 00 00 00 00 10 00 ]
CAM status=0x1, SCSI status=0x0, resid=0x0
status=0x0
SMART Health Status: OK
[log sense: 4d 00 4d 00 00 00 00 00 04 00 ]
CAM status=0x1, SCSI status=0x0, resid=0x0
status=0x0
[log sense: 4d 00 4d 00 00 00 00 00 10 00 ]
CAM status=0x1, SCSI status=0x0, resid=0x0
status=0x0
Current Drive Temperature: 30 C
Drive Trip Temperature: 60 C
[log sense: 4d 00 4e 00 00 00 00 00 04 00 ]
CAM status=0x1, SCSI status=0x0, resid=0x0
status=0x0
[log sense: 4d 00 4e 00 00 00 00 00 38 00 ]
CAM status=0x1, SCSI status=0x0, resid=0x0
status=0x0
Manufactured in week 16 of year 2015
Specified cycle count over device lifetime: 50000
Accumulated start-stop cycles: 58
Specified load-unload count over device lifetime: 600000
Accumulated load-unload cycles: 1315
[read defect list(12): b7 0c 00 00 00 00 00 00 00 08 00 00 ]
CAM status=0x1, SCSI status=0x0, resid=0x0
status=0x0
Elements in grown defect list: 0
[log sense: 4d 00 43 00 00 00 00 00 04 00 ]
CAM status=0x1, SCSI status=0x0, resid=0x0
status=0x0
[log sense: 4d 00 43 00 00 00 00 00 58 00 ]
CAM status=0x1, SCSI status=0x0, resid=0x0
status=0x0
[log sense: 4d 00 42 00 00 00 00 00 04 00 ]
CAM status=0x1, SCSI status=0x0, resid=0x0
status=0x0
[log sense: 4d 00 42 00 00 00 00 00 58 00 ]
CAM status=0x1, SCSI status=0x0, resid=0x0
status=0x0
[log sense: 4d 00 45 00 00 00 00 00 04 00 ]
CAM status=0x1, SCSI status=0x0, resid=0x0
status=0x0
[log sense: 4d 00 45 00 00 00 00 00 58 00 ]
CAM status=0x1, SCSI status=0x0, resid=0x0
status=0x0
Error counter log:
Errors Corrected by Total Correction Gigabytes Total
ECC rereads/ errors algorithm processed uncorrected
fast | delayed rewrites corrected invocations [10^9 bytes] errors
read: 0 0 0 0 0 97512.564 0
write: 0 0 0 0 0 12041.763 0
verify: 0 0 0 0 0 0.000 0
[log sense: 4d 00 46 00 00 00 00 00 04 00 ]
CAM status=0x1, SCSI status=0x0, resid=0x0
status=0x0
[log sense: 4d 00 46 00 00 00 00 00 10 00 ]
CAM status=0x1, SCSI status=0x0, resid=0x0
status=0x0
Non-medium error count: 2685
[mode sense(6): 1a 00 0a 00 40 00 ]
CAM status=0x1, SCSI status=0x0, resid=0x28
status=0x0
[request sense: 03 00 00 00 12 00 ]
CAM status=0x1, SCSI status=0x0, resid=0x0
status=0x0
[log sense: 4d 00 50 00 00 00 00 00 04 00 ]
CAM status=0x1, SCSI status=0x0, resid=0x0
status=0x0
[log sense: 4d 00 50 00 00 00 00 01 94 00 ]
CAM status=0x1, SCSI status=0x0, resid=0x0
status=0x0
SMART Self-test log
Num Test Status segment LifeTime LBA_first_err [SK ASC ASQ]
Description number (hours)
# 1 Background long Completed - 29858 - [- - -]
# 2 Background long Completed - 28564 - [- - -]
[mode sense(6): 1a 00 0a 00 40 00 ]
CAM status=0x1, SCSI status=0x0, resid=0x28
status=0x0
Long (extended) Self-test duration: 55200 seconds [920.0 minutes]