groot opperhoofd
Cadet
- Joined
- Jul 16, 2022
- Messages
- 6
Hello everyone,
I've been trying to install truenas core on my system but so far I'm stuck even before the installer menu opens. See screenshot about where it gets 'stuck'.
It's not actually unresponsive because I can plug/unplug a USB device and it will still respond to that with some extra lines but it will never get to the setup screen that I'm expecting to see.
I was using one of those SD card adapters as a USB because that was what I had lying around but I've already bought a real usb stick in the hope that that might solve it but without any luck. I've tried Truenas 13 and 12 but they both seem to stop at the same point. "uhub1: 4 ports with 4 removable self powered" is to be the last line for Truenas 13 and for 12 it continues to spit out 5 arc4random lines and then stops altogether.
I've made boot USB drives with balena etcher on MacOS and with rufus on windows but all seem to get stuck at the same point.
Then I started to doubt if my hardware had any defects so I installed Ubuntu but that didn't show any problems at all. Everything seems to work perfectly.
I have the following hardware.
I'd be happy to provide more information if necessary.
I've been trying to install truenas core on my system but so far I'm stuck even before the installer menu opens. See screenshot about where it gets 'stuck'.
It's not actually unresponsive because I can plug/unplug a USB device and it will still respond to that with some extra lines but it will never get to the setup screen that I'm expecting to see.
I was using one of those SD card adapters as a USB because that was what I had lying around but I've already bought a real usb stick in the hope that that might solve it but without any luck. I've tried Truenas 13 and 12 but they both seem to stop at the same point. "uhub1: 4 ports with 4 removable self powered" is to be the last line for Truenas 13 and for 12 it continues to spit out 5 arc4random lines and then stops altogether.
I've made boot USB drives with balena etcher on MacOS and with rufus on windows but all seem to get stuck at the same point.
Then I started to doubt if my hardware had any defects so I installed Ubuntu but that didn't show any problems at all. Everything seems to work perfectly.
I have the following hardware.
- CPU: i3 12100F
- MoBo: Gigabyte H610I DDR4
- RAM: G.Skill Aegis F4-3000C16D-16GISB
- SSD: Samsung 980 500GB
- HDD: 4x Seagate IronWolf, 6TB
I'd be happy to provide more information if necessary.