Caravan4795
Cadet
- Joined
- Jul 7, 2017
- Messages
- 1
Hi y'all!
I'm finally gonna build my first FreeNAS box. I've been convinced that it's the bee's knees by listening to Allan Jude on various podcasts the last few years.
All parts have been ordered, some have already arrived. The list is as follows:
Question:
I would like to help out the project by contributing to the Swedish translation. I've already done some work over at weblate.trueos.org.
My concern is that I'm not following some pre-set rules or guidelines. Outside of the manual's how-to I havn't been able to find anything on the subject.
If anyone could point me in the right direction it would be greatly appreciated!
I'm finally gonna build my first FreeNAS box. I've been convinced that it's the bee's knees by listening to Allan Jude on various podcasts the last few years.
All parts have been ordered, some have already arrived. The list is as follows:
- Chassis: SilverStone DS380
- Motherboard: ASRock C2750D4I
- CPU: Intel Atom® Processor C2750
- PSU: Corsair SF450 450W
- RAM: 2 x 8GB KIngston ECC KVR16E11/8
- Boot: 2 x Kingston 32GB DTSE9H USB
- Vdev: 8 x 1TB WD Red WD10EFRX in RaidZ2
- UPS: APC BK350 350VA
Question:
I would like to help out the project by contributing to the Swedish translation. I've already done some work over at weblate.trueos.org.
My concern is that I'm not following some pre-set rules or guidelines. Outside of the manual's how-to I havn't been able to find anything on the subject.
If anyone could point me in the right direction it would be greatly appreciated!
Last edited: