This week I got the following error
I assumed this drive was on its way out (its a Seagate and I have had 3 others die this year) so I replaced it.
During the resilvering process, I got another notification for what looks like another drive:
Any ideas if this drive is failing too?
*Note: I noticed the temp was quite high so I am addressing this already.
Confirmed what drive was the issue:
Then grabbed the SMART details:
Code:
Device: /dev/ada4, 8 Currently unreadable (pending) sectors Device: /dev/ada4, 8 Offline uncorrectable sectors
I assumed this drive was on its way out (its a Seagate and I have had 3 others die this year) so I replaced it.
During the resilvering process, I got another notification for what looks like another drive:
Code:
The volume Backup state is ONLINE: One or more devices has experienced an unrecoverable error. An attempt was made to correct the error. Applications are unaffected.
Any ideas if this drive is failing too?
*Note: I noticed the temp was quite high so I am addressing this already.
Code:
root@freenas:~ # zpool status pool: Backup state: ONLINE status: One or more devices has experienced an unrecoverable error. An attempt was made to correct the error. Applications are unaffected. action: Determine if the device needs to be replaced, and clear the errors using 'zpool clear' or replace the device with 'zpool replace'. see: http://illumos.org/msg/ZFS-8000-9P scan: resilvered 1.19T in 3h4m with 0 errors on Thu Jul 27 02:59:12 2017 config: NAME STATE READ WRITE CKSUM Backup ONLINE 0 0 0 raidz1-0 ONLINE 0 0 0 gptid/d7ad98e8-0c70-11e4-ac96-6805ca245f8e ONLINE 0 0 0 gptid/d7f8f707-0c70-11e4-ac96-6805ca245f8e ONLINE 0 0 0 gptid/14179716-727f-11e7-8a5a-6805ca245f8e ONLINE 0 0 0 raidz1-1 ONLINE 0 0 0 gptid/d896e8ad-0c70-11e4-ac96-6805ca245f8e ONLINE 0 0 0 gptid/e3db0d69-3ce2-11e7-a471-6805ca245f8e ONLINE 0 0 0 gptid/e3b82856-f217-11e6-a148-6805ca245f8e ONLINE 0 0 0 gptid/d431db24-a38a-11e6-aeac-6805ca245f8e ONLINE 0 0 0 gptid/da30fc34-0c70-11e4-ac96-6805ca245f8e ONLINE 0 0 28 errors: No known data errors pool: freenas-boot state: ONLINE scan: scrub repaired 0 in 0h5m with 0 errors on Thu Jun 22 03:50:12 2017 config: NAME STATE READ WRITE CKSUM freenas-boot ONLINE 0 0 0 da0p2 ONLINE 0 0 0 errors: No known data errors
Confirmed what drive was the issue:
Code:
glabel status | grep gptid/da30fc34-0c70-11e4-ac96-6805ca245f8e gptid/da30fc34-0c70-11e4-ac96-6805ca245f8e N/A ada7p2
Then grabbed the SMART details:
Code:
smartctl -a /dev/ada7 smartctl 6.5 2016-05-07 r4318 [FreeBSD 11.0-STABLE amd64] (local build) Copyright (C) 2002-16, Bruce Allen, Christian Franke, www.smartmontools.org === START OF INFORMATION SECTION === Model Family: Seagate Barracuda 7200.14 (AF) Device Model: ST3000DM001-1E6166 Serial Number: W1F3Z6K9 LU WWN Device Id: 5 000c50 06e1d6bda Firmware Version: SC48 User Capacity: 3,000,592,982,016 bytes [3.00 TB] Sector Sizes: 512 bytes logical, 4096 bytes physical Rotation Rate: 7200 rpm Form Factor: 3.5 inches Device is: In smartctl database [for details use: -P show] ATA Version is: ATA8-ACS T13/1699-D revision 4 SATA Version is: SATA 3.0, 6.0 Gb/s (current: 6.0 Gb/s) Local Time is: Thu Jul 27 11:44:12 2017 EDT SMART support is: Available - device has SMART capability. SMART support is: Enabled === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED General SMART Values: Offline data collection status: (0x82) Offline data collection activity was completed without error. Auto Offline Data Collection: Enabled. Self-test execution status: ( 0) The previous self-test routine completed without error or no self-test has ever been run. Total time to complete Offline data collection: ( 575) seconds. Offline data collection capabilities: (0x7b) SMART execute Offline immediate. Auto Offline data collection on/off support. Suspend Offline collection upon new command. Offline surface scan supported. Self-test supported. Conveyance Self-test supported. Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. General Purpose Logging supported. Short self-test routine recommended polling time: ( 1) minutes. Extended self-test routine recommended polling time: ( 331) minutes. Conveyance self-test routine recommended polling time: ( 2) minutes. SCT capabilities: (0x3081) SCT Status supported. SMART Attributes Data Structure revision number: 10 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE 1 Raw_Read_Error_Rate 0x000f 119 099 006 Pre-fail Always - 206489376 3 Spin_Up_Time 0x0003 091 090 000 Pre-fail Always - 0 4 Start_Stop_Count 0x0032 100 100 020 Old_age Always - 67 5 Reallocated_Sector_Ct 0x0033 100 100 010 Pre-fail Always - 0 7 Seek_Error_Rate 0x000f 055 051 030 Pre-fail Always - 962168643140 9 Power_On_Hours 0x0032 074 074 000 Old_age Always - 23342 10 Spin_Retry_Count 0x0013 100 100 097 Pre-fail Always - 0 12 Power_Cycle_Count 0x0032 100 100 020 Old_age Always - 67 183 Runtime_Bad_Block 0x0032 100 100 000 Old_age Always - 0 184 End-to-End_Error 0x0032 100 100 099 Old_age Always - 0 187 Reported_Uncorrect 0x0032 100 100 000 Old_age Always - 0 188 Command_Timeout 0x0032 100 099 000 Old_age Always - 0 0 8 189 High_Fly_Writes 0x003a 090 090 000 Old_age Always - 10 190 Airflow_Temperature_Cel 0x0022 057 050 045 Old_age Always - 43 (Min/Max 38/45) 191 G-Sense_Error_Rate 0x0032 100 100 000 Old_age Always - 0 192 Power-Off_Retract_Count 0x0032 100 100 000 Old_age Always - 34 193 Load_Cycle_Count 0x0032 100 100 000 Old_age Always - 77 194 Temperature_Celsius 0x0022 043 050 000 Old_age Always - 43 (0 18 0 0 0) 197 Current_Pending_Sector 0x0012 100 100 000 Old_age Always - 0 198 Offline_Uncorrectable 0x0010 100 100 000 Old_age Offline - 0 199 UDMA_CRC_Error_Count 0x003e 200 116 000 Old_age Always - 1249 240 Head_Flying_Hours 0x0000 100 253 000 Old_age Offline - 23342h+56m+40.973s 241 Total_LBAs_Written 0x0000 100 253 000 Old_age Offline - 3877893327 242 Total_LBAs_Read 0x0000 100 253 000 Old_age Offline - 57573628944 SMART Error Log Version: 1 No Errors Logged SMART Self-test log structure revision number 1 Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error # 1 Short offline Completed without error 00% 23340 - # 2 Short offline Completed without error 00% 23309 - # 3 Short offline Completed without error 00% 23261 - # 4 Extended offline Completed without error 00% 23222 - # 5 Short offline Completed without error 00% 23189 - # 6 Short offline Completed without error 00% 23141 - # 7 Short offline Completed without error 00% 23093 - # 8 Short offline Completed without error 00% 22997 - # 9 Short offline Completed without error 00% 22949 - #10 Short offline Completed without error 00% 22901 - #11 Extended offline Completed without error 00% 22884 - #12 Short offline Completed without error 00% 22805 - #13 Short offline Completed without error 00% 22744 - #14 Short offline Completed without error 00% 22648 - #15 Short offline Completed without error 00% 22600 - #16 Short offline Completed without error 00% 22552 - #17 Extended offline Completed without error 00% 22511 - #18 Short offline Completed without error 00% 22480 - #19 Short offline Completed without error 00% 22432 - #20 Short offline Completed without error 00% 22384 - #21 Short offline Completed without error 00% 22288 - SMART Selective self-test log data structure revision number 1 SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS 1 0 0 Not_testing 2 0 0 Not_testing 3 0 0 Not_testing 4 0 0 Not_testing 5 0 0 Not_testing Selective self-test flags (0x0): After scanning selected spans, do NOT read-scan remainder of disk. If Selective self-test is pending on power-up, resume after 0 minute delay.