Hello and new to Truenas so I am a rookie. Just setup Truenas and installed 2 red WD 6Gb drives and created a striped pool. I am using it to store media files for Plex. On one of the 6Gb drives I am getting Checksum errors. What are some of the things I should try? Could it be I have a bad drive or should I try and move it to a new sata port? If I move it will it destroy my pool?
Warning: settings changed through the CLI are not written to
the configuration database and will be reset on reboot.
root@truenas[~]# zpool status -xv
pool: media
state: ONLINE
status: One or more devices has experienced an error resulting in data
corruption. Applications may be affected.
action: Restore the file in question if possible. Otherwise restore the
entire pool from backup.
see: https://openzfs.github.io/openzfs-docs/msg/ZFS-8000-8A
scan: scrub repaired 0B in 00:58:34 with 11 errors on Tue Apr 5 21:52:52 2022
config:
NAME STATE READ WRITE CKSUM
media ONLINE 0 0 0
gptid/5fa0a006-b45b-11ec-8827-7824af3aa446 ONLINE 0 0 3
gptid/5faa3f91-b45b-11ec-8827-7824af3aa446 ONLINE 0 0 10
errors: Permanent errors have been detected in the following files:
/mnt/media/media/Kids/Despicable Me 2.avi
media/media:<0x2b>
/mnt/media/media/Movies/Star Wars/The Mandalorian/Star Wars - The Mandalorian Movie - Part I (2019).mkv
/mnt/media/media/Kids/How to Train Your Dragon - The Hidden World 2019.mkv
/mnt/media/media/Kids/onward.2020.catalan.multi.1080p.bluray.x264-despacito.mkv
media/media:<0x86>
/mnt/media/media/Kids/Goosebumps 2015.mkv
/mnt/media/media/Movies/Star Wars/The Mandalorian/Star Wars - The Mandalorian Movie - Part II (2019).mkv
/mnt/media/media/Movies/Free.Guy.2021.1080p.HDRip.X264.DD5.1-EVO.mkv
Use smartctl -h to get a usage summary
root@truenas[~]# smartctl -a /dev/ada3
smartctl 7.2 2020-12-30 r5155 [FreeBSD 12.2-RELEASE-p12 amd64] (local build)
Copyright (C) 2002-20, Bruce Allen, Christian Franke, www.smartmontools.org
=== START OF INFORMATION SECTION ===
Model Family: Western Digital Red (SMR)
Device Model: WDC WD60EFAX-68JH4N1
Serial Number: WD-WX72DA12ZL4E
LU WWN Device Id: 5 0014ee 2bf5de6cd
Firmware Version: 83.00A83
User Capacity: 6,001,175,126,016 bytes [6.00 TB]
Sector Sizes: 512 bytes logical, 4096 bytes physical
Rotation Rate: 5400 rpm
Form Factor: 3.5 inches
TRIM Command: Available, deterministic, zeroed
Device is: In smartctl database [for details use: -P show]
ATA Version is: ACS-3 T13/2161-D revision 5
SATA Version is: SATA 3.1, 6.0 Gb/s (current: 6.0 Gb/s)
Local Time is: Tue Apr 5 22:07:07 2022 CDT
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED
General SMART Values:
Offline data collection status: (0x00) Offline data collection activity
was never started.
Auto Offline Data Collection: Disabled.
Self-test execution status: ( 0) The previous self-test routine completed
without error or no self-test has ever
been run.
Total time to complete Offline
data collection: (29280) seconds.
Offline data collection
capabilities: (0x7b) SMART execute Offline immediate.
Auto Offline data collection on/off support.
Suspend Offline collection upon new
command.
Offline surface scan supported.
Self-test supported.
Conveyance Self-test supported.
Selective Self-test supported.
SMART capabilities: (0x0003) Saves SMART data before entering
power-saving mode.
Supports SMART auto save timer.
Error logging capability: (0x01) Error logging supported.
General Purpose Logging supported.
Short self-test routine
recommended polling time: ( 2) minutes.
Extended self-test routine
recommended polling time: ( 67) minutes.
Conveyance self-test routine
recommended polling time: ( 1) minutes.
SCT capabilities: (0x3039) SCT Status supported.
SCT Error Recovery Control supported.
SCT Feature Control supported.
SCT Data Table supported.
SMART Attributes Data Structure revision number: 16
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE
1 Raw_Read_Error_Rate 0x002f 200 200 051 Pre-fail Always - 0
3 Spin_Up_Time 0x0027 100 253 021 Pre-fail Always - 0
4 Start_Stop_Count 0x0032 100 100 000 Old_age Always - 1
5 Reallocated_Sector_Ct 0x0033 200 200 140 Pre-fail Always - 0
7 Seek_Error_Rate 0x002e 200 200 000 Old_age Always - 0
9 Power_On_Hours 0x0032 100 100 000 Old_age Always - 32
10 Spin_Retry_Count 0x0032 100 253 000 Old_age Always - 0
11 Calibration_Retry_Count 0x0032 100 253 000 Old_age Always - 0
12 Power_Cycle_Count 0x0032 100 100 000 Old_age Always - 1
192 Power-Off_Retract_Count 0x0032 200 200 000 Old_age Always - 0
193 Load_Cycle_Count 0x0032 200 200 000 Old_age Always - 2
194 Temperature_Celsius 0x0022 119 115 000 Old_age Always - 31
196 Reallocated_Event_Count 0x0032 200 200 000 Old_age Always - 0
197 Current_Pending_Sector 0x0032 200 200 000 Old_age Always - 0
198 Offline_Uncorrectable 0x0030 100 253 000 Old_age Offline - 0
199 UDMA_CRC_Error_Count 0x0032 200 200 000 Old_age Always - 0
200 Multi_Zone_Error_Rate 0x0008 100 253 000 Old_age Offline - 0
SMART Error Log Version: 1
No Errors Logged
SMART Self-test log structure revision number 1
No self-tests have been logged. [To run self-tests, use: smartctl -t]
SMART Selective self-test log data structure revision number 1
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
1 0 0 Not_testing
2 0 0 Not_testing
