twitchingtongues
Cadet
- Joined
- Feb 29, 2020
- Messages
- 4
I have a disk showing:
Device: /dev/da1 [SAT], 8 Currently unreadable (pending) sectors.
It passes a long smart test, but it has high power-on hours so I thought I'd go ahead and replace it.
When I go to Pool -> Status -> da1 -> offline nothing happens. There are no errors that I see, nothing in /var/log/messages.
I also tried it from the CLI, same experience. No errors, just nothing happens.
System:
TrueNAS Core 13.0-U4
Supermicro X10SLL-F
i3-4130
16 GB RAM (4x4GB Kingston KVR13E9/4I ECC)
(3) 8TB Western Digital Ultrastar He10/12 (Model: WDC WD80EMAZ-00WJTA0)
Device: /dev/da1 [SAT], 8 Currently unreadable (pending) sectors.
It passes a long smart test, but it has high power-on hours so I thought I'd go ahead and replace it.
When I go to Pool -> Status -> da1 -> offline nothing happens. There are no errors that I see, nothing in /var/log/messages.
I also tried it from the CLI, same experience. No errors, just nothing happens.
System:
TrueNAS Core 13.0-U4
Supermicro X10SLL-F
i3-4130
16 GB RAM (4x4GB Kingston KVR13E9/4I ECC)
(3) 8TB Western Digital Ultrastar He10/12 (Model: WDC WD80EMAZ-00WJTA0)
Code:
[@freenas ~]$ zpool status
pool: freenas-boot
state: ONLINE
status: Some supported and requested features are not enabled on the pool.
The pool can still be used, but some features are unavailable.
action: Enable all features using 'zpool upgrade'. Once this is done,
the pool may no longer be accessible by software that does not support
the features. See zpool-features(7) for details.
scan: scrub repaired 0B in 00:00:28 with 0 errors on Wed Mar 15 03:45:28 2023
config:
NAME STATE READ WRITE CKSUM
freenas-boot ONLINE 0 0 0
mirror-0 ONLINE 0 0 0
ada0p2 ONLINE 0 0 0
ada1p2 ONLINE 0 0 0
errors: No known data errors
pool: storage0
state: ONLINE
scan: scrub repaired 0B in 04:38:02 with 0 errors on Sun Feb 26 04:38:02 2023
config:
NAME STATE READ WRITE CKSUM
storage0 ONLINE 0 0 0
raidz1-0 ONLINE 0 0 0
da0p2 ONLINE 0 0 0
gptid/0e7adb81-10cc-11e6-afcb-002590d4cb9b ONLINE 0 0 0
gptid/1c3a42d0-0faa-11e6-aaf8-002590d4cb9b ONLINE 0 0 0
errors: No known data errors
pool: storage1
state: ONLINE
scan: resilvered 300K in 00:00:00 with 0 errors on Wed Mar 15 13:25:21 2023
config:
NAME STATE READ WRITE CKSUM
storage1 ONLINE 0 0 0
raidz1-0 ONLINE 0 0 0
da2p2 ONLINE 0 0 0
da3p2 ONLINE 0 0 0
da1p2 ONLINE 0 0 0
errors: No known data errorsCode:
[@freenas ~]$ sudo smartctl -x /dev/da1
Password:
smartctl 7.2 2021-09-14 r5236 [FreeBSD 13.1-RELEASE-p7 amd64] (local build)
Copyright (C) 2002-20, Bruce Allen, Christian Franke, www.smartmontools.org
=== START OF INFORMATION SECTION ===
Model Family: Western Digital Ultrastar He10/12
Device Model: WDC WD80EMAZ-00WJTA0
Serial Number: 1SHJV9LZ
LU WWN Device Id: 5 000cca 26bd5c034
Firmware Version: 83.H0A83
User Capacity: 8,001,563,222,016 bytes [8.00 TB]
Sector Sizes: 512 bytes logical, 4096 bytes physical
Rotation Rate: 5400 rpm
Form Factor: 3.5 inches
Device is: In smartctl database [for details use: -P show]
ATA Version is: ACS-2, ATA8-ACS T13/1699-D revision 4
SATA Version is: SATA 3.2, 6.0 Gb/s (current: 6.0 Gb/s)
Local Time is: Wed Mar 15 13:28:40 2023 EDT
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
AAM feature is: Unavailable
APM feature is: Disabled
Rd look-ahead is: Enabled
Write cache is: Enabled
DSN feature is: Unavailable
ATA Security is: Disabled, NOT FROZEN [SEC1]
Wt Cache Reorder: Enabled
=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED
General SMART Values:
Offline data collection status: (0x82) Offline data collection activity
was completed without error.
Auto Offline Data Collection: Enabled.
Self-test execution status: ( 0) The previous self-test routine completed
without error or no self-test has ever
been run.
Total time to complete Offline
data collection: ( 93) seconds.
Offline data collection
capabilities: (0x5b) SMART execute Offline immediate.
Auto Offline data collection on/off support.
Suspend Offline collection upon new
command.
Offline surface scan supported.
Self-test supported.
No Conveyance Self-test supported.
Selective Self-test supported.
SMART capabilities: (0x0003) Saves SMART data before entering
power-saving mode.
Supports SMART auto save timer.
Error logging capability: (0x01) Error logging supported.
General Purpose Logging supported.
Short self-test routine
recommended polling time: ( 2) minutes.
Extended self-test routine
recommended polling time: ( 976) minutes.
SCT capabilities: (0x003d) SCT Status supported.
SCT Error Recovery Control supported.
SCT Feature Control supported.
SCT Data Table supported.
SMART Attributes Data Structure revision number: 16
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE
1 Raw_Read_Error_Rate PO-R-- 100 100 016 - 0
2 Throughput_Performance --S--- 128 128 054 - 116
3 Spin_Up_Time POS--- 156 156 024 - 397 (Average 446)
4 Start_Stop_Count -O--C- 100 100 000 - 35
5 Reallocated_Sector_Ct PO--CK 100 100 005 - 0
7 Seek_Error_Rate -O-R-- 100 100 067 - 0
8 Seek_Time_Performance --S--- 128 128 020 - 18
9 Power_On_Hours -O--C- 095 095 000 - 40564
10 Spin_Retry_Count -O--C- 100 100 060 - 0
12 Power_Cycle_Count -O--CK 100 100 000 - 35
22 Helium_Level PO---K 100 100 025 - 100
192 Power-Off_Retract_Count -O--CK 098 098 000 - 3122
193 Load_Cycle_Count -O--C- 098 098 000 - 3122
194 Temperature_Celsius -O---- 135 135 000 - 48 (Min/Max 25/62)
196 Reallocated_Event_Count -O--CK 100 100 000 - 0
197 Current_Pending_Sector -O---K 100 100 000 - 8
198 Offline_Uncorrectable ---R-- 100 100 000 - 0
199 UDMA_CRC_Error_Count -O-R-- 200 200 000 - 0
||||||_ K auto-keep
|||||__ C event count
||||___ R error rate
|||____ S speed/performance
||_____ O updated online
|______ P prefailure warning
General Purpose Log Directory Version 1
SMART Log Directory Version 1 [multi-sector log support]
Address Access R/W Size Description
0x00 GPL,SL R/O 1 Log Directory
0x01 SL R/O 1 Summary SMART error log
0x02 SL R/O 1 Comprehensive SMART error log
0x03 GPL R/O 1 Ext. Comprehensive SMART error log
0x04 GPL R/O 256 Device Statistics log
0x04 SL R/O 255 Device Statistics log
0x06 SL R/O 1 SMART self-test log
0x07 GPL R/O 1 Extended self-test log
0x08 GPL R/O 2 Power Conditions log
0x09 SL R/W 1 Selective self-test log
0x0c GPL R/O 5501 Pending Defects log
0x10 GPL R/O 1 NCQ Command Error log
0x11 GPL R/O 1 SATA Phy Event Counters log
0x12 GPL R/O 1 SATA NCQ Non-Data log
0x13 GPL R/O 1 SATA NCQ Send and Receive log
0x15 GPL R/W 1 Rebuild Assist log
0x21 GPL R/O 1 Write stream error log
0x22 GPL R/O 1 Read stream error log
0x24 GPL R/O 256 Current Device Internal Status Data log
0x25 GPL R/O 256 Saved Device Internal Status Data log
0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log
0x80-0x9f GPL,SL R/W 16 Host vendor specific log
0xe0 GPL,SL R/W 1 SCT Command/Status
0xe1 GPL,SL R/W 1 SCT Data Transfer
SMART Extended Comprehensive Error Log Version: 1 (1 sectors)
No Errors Logged
SMART Extended Self-test Log Version: 1 (1 sectors)
Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error
# 1 Short offline Completed without error 00% 40551 -
# 2 Short offline Completed without error 00% 40527 -
# 3 Short offline Completed without error 00% 40503 -
# 4 Short offline Completed without error 00% 40480 -
# 5 Short offline Completed without error 00% 40456 -
# 6 Short offline Completed without error 00% 40432 -
# 7 Short offline Completed without error 00% 40407 -
# 8 Short offline Completed without error 00% 40383 -
# 9 Extended offline Completed without error 00% 40361 -
#10 Short offline Completed without error 00% 38652 -
SMART Selective self-test log data structure revision number 1
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
1 0 0 Not_testing
2 0 0 Not_testing
3 0 0 Not_testing
4 0 0 Not_testing
5 0 0 Not_testing
Selective self-test flags (0x0):
After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.
SCT Status Version: 3
SCT Version (vendor specific): 256 (0x0100)
Device State: Active (0)
Current Temperature: 48 Celsius
Power Cycle Min/Max Temperature: 45/56 Celsius
Lifetime Min/Max Temperature: 25/62 Celsius
Under/Over Temperature Limit Count: 0/0
SCT Temperature History Version: 2
Temperature Sampling Period: 1 minute
Temperature Logging Interval: 1 minute
Min/Max recommended Temperature: 0/65 Celsius
Min/Max Temperature Limit: -40/70 Celsius
Temperature History Size (Index): 128 (104)
Index Estimated Time Temperature Celsius
105 2023-03-15 11:21 48 *****************************
... ..( 58 skipped). .. *****************************
36 2023-03-15 12:20 48 *****************************
37 2023-03-15 12:21 49 ******************************
38 2023-03-15 12:22 48 *****************************
... ..( 65 skipped). .. *****************************
104 2023-03-15 13:28 48 *****************************
SCT Error Recovery Control:
Read: 70 (7.0 seconds)
Write: 70 (7.0 seconds)
Device Statistics (GP Log 0x04)
Page Offset Size Value Flags Description
0x01 ===== = = === == General Statistics (rev 1) ==
0x01 0x008 4 35 --- Lifetime Power-On Resets
0x01 0x010 4 40564 --- Power-on Hours
0x01 0x018 6 57385267769 --- Logical Sectors Written
0x01 0x020 6 539377177 --- Number of Write Commands
0x01 0x028 6 489347405747 --- Logical Sectors Read
0x01 0x030 6 2278363361 --- Number of Read Commands
0x01 0x038 6 146031775800 --- Date and Time TimeStamp
0x03 ===== = = === == Rotating Media Statistics (rev 1) ==
0x03 0x008 4 40068 --- Spindle Motor Power-on Hours
0x03 0x010 4 40068 --- Head Flying Hours
0x03 0x018 4 3122 --- Head Load Events
0x03 0x020 4 0 --- Number of Reallocated Logical Sectors
0x03 0x028 4 5199 --- Read Recovery Attempts
0x03 0x030 4 0 --- Number of Mechanical Start Failures
0x04 ===== = = === == General Errors Statistics (rev 1) ==
0x04 0x008 4 0 --- Number of Reported Uncorrectable Errors
0x04 0x010 4 0 --- Resets Between Cmd Acceptance and Completion
0x05 ===== = = === == Temperature Statistics (rev 1) ==
0x05 0x008 1 48 --- Current Temperature
0x05 0x010 1 48 N-- Average Short Term Temperature
0x05 0x018 1 50 N-- Average Long Term Temperature
0x05 0x020 1 62 --- Highest Temperature
0x05 0x028 1 25 --- Lowest Temperature
0x05 0x030 1 60 N-- Highest Average Short Term Temperature
0x05 0x038 1 25 N-- Lowest Average Short Term Temperature
0x05 0x040 1 54 N-- Highest Average Long Term Temperature
0x05 0x048 1 25 N-- Lowest Average Long Term Temperature
0x05 0x050 4 0 --- Time in Over-Temperature
0x05 0x058 1 65 --- Specified Maximum Operating Temperature
0x05 0x060 4 0 --- Time in Under-Temperature
0x05 0x068 1 0 --- Specified Minimum Operating Temperature
0x06 ===== = = === == Transport Statistics (rev 1) ==
0x06 0x008 4 8 --- Number of Hardware Resets
0x06 0x010 4 124 --- Number of ASR Events
0x06 0x018 4 0 --- Number of Interface CRC Errors
0xff ===== = = === == Vendor Specific Statistics (rev 1) ==
|||_ C monitored condition met
||__ D supports DSN
|___ N normalized value
Pending Defects log (GP Log 0x0c)
Index LBA Hours
0 11466502344 -
1 11466502345 -
2 11466502346 -
3 11466502347 -
4 11466502348 -
5 11466502349 -
6 11466502350 -
7 11466502351 -
SATA Phy Event Counters (GP Log 0x11)
ID Size Value Description
0x0001 2 0 Command failed due to ICRC error
0x0002 2 0 R_ERR response for data FIS
0x0003 2 0 R_ERR response for device-to-host data FIS
0x0004 2 0 R_ERR response for host-to-device data FIS
0x0005 2 0 R_ERR response for non-data FIS
0x0006 2 0 R_ERR response for device-to-host non-data FIS
0x0007 2 0 R_ERR response for host-to-device non-data FIS
0x0008 2 0 Device-to-host non-data FIS retries
0x0009 2 7 Transition from drive PhyRdy to drive PhyNRdy
0x000a 2 8 Device-to-host register FISes sent due to a COMRESET
0x000b 2 0 CRC errors within host-to-device FIS
0x000d 2 0 Non-CRC errors within host-to-device FIS
Last edited:
