unable to read smart data on one drive

[patrickRx]

Hello, my boot drive is giving the following errors when trying to read SMART data and it creates an alert. I believe this started when I applied the most recent update although I'm not certain. I've attempted to downgrade but going from 12.0-u6.1 to u5.1 fails (I can post the log if needed). My data drives are connected to the same Intel controller as below and work fine. Anyone have any ideas on the cause of this? I'd be happy to test downgrading if that's possible. Thanks in advance for any assistance.

***editing to say I'm not exactly sure which of the controllers the drive is connected to, so I tested it in all 6 ports and have the same problem. I suppose it's a drive specific error and probably a problem with the drive hardware?

CPU: i5-3570k
Mobo: Zotac H67ITX-C-E
SATA controllers: JMicron JMB360 and Intel Cougar Point
Drive: ADATA SP550

smartctl 7.2 2020-12-30 r5155 [FreeBSD 12.2-RELEASE-p10 amd64] (local build) Copyright (C) 2002-20, Bruce Allen, Christian Franke, www.smartmontools.org === START OF INFORMATION SECTION === Model Family: Silicon Motion based SSDs Device Model: ADATA SP550 Serial Number: 2G3820025007 Firmware Version: P0705AB User Capacity: 240,057,409,536 bytes [240 GB] Sector Sizes: 512 bytes logical, 4096 bytes physical Rotation Rate: Solid State Device TRIM Command: Available, deterministic, zeroed Device is: In smartctl database [for details use: -P show] ATA Version is: ACS-2 (minor revision not indicated) SATA Version is: SATA 3.1, 6.0 Gb/s (current: 3.0 Gb/s) Local Time is: Wed Nov 24 17:57:25 2021 PST SMART support is: Available - device has SMART capability. SMART support is: Enabled === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED General SMART Values: Offline data collection status: (0x02) Offline data collection activity was completed without error. Auto Offline Data Collection: Disabled. Self-test execution status: ( 0) The previous self-test routine completed without error or no self-test has ever been run. Total time to complete Offline data collection: ( 171) seconds. Offline data collection capabilities: (0x71) SMART execute Offline immediate. No Auto Offline data collection support. Suspend Offline collection upon new command. No Offline surface scan supported. Self-test supported. Conveyance Self-test supported. Selective Self-test supported. SMART capabilities: (0x0002) Does not save SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. General Purpose Logging supported. Short self-test routine recommended polling time: ( 1) minutes. Extended self-test routine recommended polling time: ( 2) minutes. Conveyance self-test routine recommended polling time: ( 1) minutes. SCT capabilities: (0x0035) SCT Status supported. SCT Feature Control supported. SCT Data Table supported. SMART Attributes Data Structure revision number: 1 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE 1 Raw_Read_Error_Rate 0x0000 100 100 000 Old_age Offline - 0 5 Reallocated_Sector_Ct 0x0000 100 100 000 Old_age Offline - 0 9 Power_On_Hours 0x0000 100 100 000 Old_age Offline - 2870 12 Power_Cycle_Count 0x0000 100 100 000 Old_age Offline - 1153 160 Uncorrectable_Error_Cnt 0x0000 100 100 000 Old_age Offline - 0 161 Valid_Spare_Block_Cnt 0x0000 100 100 000 Old_age Offline - 16 163 Initial_Bad_Block_Count 0x0000 100 100 000 Old_age Offline - 361 148 Total_SLC_Erase_Ct 0x0000 100 100 000 Old_age Offline - 136939 149 Max_SLC_Erase_Ct 0x0000 100 100 000 Old_age Offline - 1875 150 Min_SLC_Erase_Ct 0x0000 100 100 000 Old_age Offline - 1730 151 Average_SLC_Erase_Ct 0x0000 100 100 000 Old_age Offline - 1850 164 Total_Erase_Count 0x0000 100 100 000 Old_age Offline - 48886 165 Max_Erase_Count 0x0000 100 100 000 Old_age Offline - 183 166 Min_Erase_Count 0x0000 100 100 000 Old_age Offline - 18 167 Average_Erase_Count 0x0000 100 100 000 Old_age Offline - 38 169 Remaining_Lifetime_Perc 0x0000 100 100 001 Old_age Offline - 97 181 Program_Fail_Cnt_Total 0x0000 100 100 000 Old_age Offline - 0 182 Erase_Fail_Count_Total 0x0000 100 100 000 Old_age Offline - 0 192 Power-Off_Retract_Count 0x0000 100 100 000 Old_age Offline - 40 194 Temperature_Celsius 0x0000 100 100 070 Old_age Offline - 27 (35 35 35 35 0) 199 UDMA_CRC_Error_Count 0x0000 100 100 000 Old_age Offline - 0 232 Available_Reservd_Space 0x0000 100 100 000 Old_age Offline - 100 241 Host_Writes_32MiB 0x0000 100 100 000 Old_age Offline - 161699 242 Host_Reads_32MiB 0x0000 100 100 000 Old_age Offline - 125139 245 TLC_Writes_32MiB 0x0000 100 100 000 Old_age Offline - 288732 246 SLC_Writes_32MiB 0x0000 100 100 000 Old_age Offline - 273878 247 Raid_Recoverty_Ct 0x0000 100 100 000 Old_age Offline - 0 Read SMART Error Log failed: Input/output error Read SMART Self-test Log failed: Input/output error Read SMART Selective Self-test Log failed: Input/output error

dmesg | grep SATA

ahci0: <JMicron JMB360 AHCI SATA controller> port 0xd040-0xd047,0xd030-0xd033,0xd020-0xd027,0xd010-0xd013,0xd000-0xd00f mem 0xf7d10000-0xf7d101ff irq 17 at device 0.0 on pci3 atapci0: <Intel Cougar Point SATA600 controller> port 0xf110-0xf117,0xf100-0xf103,0xf0f0-0xf0f7,0xf0e0-0xf0e3,0xf0d0-0xf0df,0xf0c0-0xf0cf irq 19 at device 31.2 on pci0 atapci1: <Intel Cougar Point SATA300 controller> port 0xf0b0-0xf0b7,0xf0a0-0xf0a3,0xf090-0xf097,0xf080-0xf083,0xf070-0xf07f,0xf060-0xf06f irq 19 at device 31.5 on pci0 ada0: <ADATA SP550 P0705AB> ACS-2 ATA SATA 3.x device ada0: 600.000MB/s transfers (SATA 3.x, UDMA5, PIO 1024bytes) ada1: <WDC WD120EMFZ-11A6JA0 81.00A81> ACS-2 ATA SATA 3.x device ada1: 300.000MB/s transfers (SATA 2.x, UDMA5, PIO 8192bytes) ada2: <WDC WD120EDAZ-11F3RA0 81.00A81> ACS-2 ATA SATA 3.x device ada2: 300.000MB/s transfers (SATA 2.x, UDMA5, PIO 8192bytes) ada3: <WDC WD120EMFZ-11A6JA0 81.00A81> ACS-2 ATA SATA 3.x device ada3: 300.000MB/s transfers (SATA 2.x, UDMA5, PIO 8192bytes)