Unable to Partition boot drive after replacement [9.2.0.1]

[hunkeelin]

I tried the nas4free forums but it doesn't seem that responsive so I am going to try my luck here.

version: 9.2.0.1 - Shigawire (revision 972)


My boot drive is in raid 1. One of the hdd is failing so I replaced it.

When I go to gui, I can't seem to create 3 partitions. Here's the info:

Under Disks|Software RAID|RAID1|management

It looks like this



Under Disks|Software RAID|RAID1|tools: (Screen shot below)

rebuilding root

rebuilding boot

rebuilding swap

I'm only able to rebuild root. For swap and boot I get the following message

`geom: No such provider: ada0p3.` for the boot drop down menu

`geom: No such provider: ada0p3.` for the swap drop down menu

So this is what I deduce. ada0 the hdd I just replaced only have one partition. I am unable to create 3 partition that mirrors ada1.

This is really critical as the machine is only sitting on one os drive. If that drive die the machine will die.

thanks

 

[dlavigne]

You'll have to stick with the nas4free forums as that is the correct operating system and has nothing to do with FreeNAS.