belisarius
Dabbler
- Joined
- Dec 4, 2013
- Messages
- 20
I've been running Corral for a while, but some issues with the virtualization started driving me nuts and I decided to move over to 11.2. I forgot to export the volume, and now I can't seem to figure out how to import it in 11.2 via the WebGUI (it's never listed as an option to import). I was able to import it via the cli, and everything looks in order, but it's never visible via the GUI (either as an import option or if I've imported it via cli).
Here's an output of zpool status after I've imported via cli:
I've had a few failed disks over the years, and I wasn't able to figure out how to replace them via the Corral GUI, so I did it via ZFS commands. Know it wasn't exactly kosher, but that's why there's a mix of gptid's and not.
I've tried exporting this via zpool export a couple times, but the GUI never lists it as an option for import in the drop-down.
Any ideas for what I could do?
Here's an output of zpool status after I've imported via cli:
Code:
pool: raid state: ONLINE status: Some supported features are not enabled on the pool. The pool can still be used, but some features are unavailable. action: Enable all features using 'zpool upgrade'. Once this is done, the pool may no longer be accessible by software that does not support the features. See zpool-features(7) for details. scan: resilvered 1.88T in 0 days 10:20:00 with 0 errors on Mon Dec 17 13:50:11 2018 config: NAME STATE READ WRITE CKSUM raid ONLINE 0 0 0 raidz2-0 ONLINE 0 0 0 gptid/5fd46dbe-c843-11e5-b38c-0025902afeaa ONLINE 0 0 0 gptid/60f18229-c843-11e5-b38c-0025902afeaa ONLINE 0 0 0 gptid/621ba997-c843-11e5-b38c-0025902afeaa ONLINE 0 0 0 gptid/63370bb6-c843-11e5-b38c-0025902afeaa ONLINE 0 0 0 gptid/6455e30a-c843-11e5-b38c-0025902afeaa ONLINE 0 0 0 gptid/657a56ef-c843-11e5-b38c-0025902afeaa ONLINE 0 0 0 gptid/6698600a-c843-11e5-b38c-0025902afeaa ONLINE 0 0 0 gptid/67c3d55f-c843-11e5-b38c-0025902afeaa ONLINE 0 0 0 gptid/68e5e742-c843-11e5-b38c-0025902afeaa ONLINE 0 0 0 raidz2-1 ONLINE 0 0 0 gptid/6a44a0fd-c843-11e5-b38c-0025902afeaa ONLINE 0 0 0 gptid/6c7a3d3b-c843-11e5-b38c-0025902afeaa ONLINE 0 0 0 gptid/6e1fb92f-c843-11e5-b38c-0025902afeaa ONLINE 0 0 0 da33 ONLINE 0 0 0 gptid/71ceedba-c843-11e5-b38c-0025902afeaa ONLINE 0 0 0 gptid/72e7cb0f-c843-11e5-b38c-0025902afeaa ONLINE 0 0 0 gptid/7406a782-c843-11e5-b38c-0025902afeaa ONLINE 0 0 0 gptid/76118ba0-c843-11e5-b38c-0025902afeaa ONLINE 0 0 0 gptid/77a81005-c843-11e5-b38c-0025902afeaa ONLINE 0 0 0 raidz2-2 ONLINE 0 0 0 gptid/a8e83b7f-c9a8-11e5-8f82-0025902afeaa ONLINE 0 0 0 gptid/aa4f423e-c9a8-11e5-8f82-0025902afeaa ONLINE 0 0 0 gptid/ab32fd5e-c9a8-11e5-8f82-0025902afeaa ONLINE 0 0 0 gptid/ad7d8597-c9a8-11e5-8f82-0025902afeaa ONLINE 0 0 0 gptid/af58bde3-c9a8-11e5-8f82-0025902afeaa ONLINE 0 0 0 gptid/b0a52f1f-c9a8-11e5-8f82-0025902afeaa ONLINE 0 0 0 gptid/b1e946b7-c9a8-11e5-8f82-0025902afeaa ONLINE 0 0 0 gptid/b404124c-c9a8-11e5-8f82-0025902afeaa ONLINE 0 0 0 gptid/b6e1acd6-c9a8-11e5-8f82-0025902afeaa ONLINE 0 0 0 raidz2-3 ONLINE 0 0 0 da34 ONLINE 0 0 0 da35 ONLINE 0 0 0 gptid/f8b19635-c9a8-11e5-8f82-0025902afeaa ONLINE 0 0 0 gptid/fa16e504-c9a8-11e5-8f82-0025902afeaa ONLINE 0 0 0 gptid/faf40994-c9a8-11e5-8f82-0025902afeaa ONLINE 0 0 0 gptid/fbb5ebd0-c9a8-11e5-8f82-0025902afeaa ONLINE 0 0 0 gptid/fdf77229-c9a8-11e5-8f82-0025902afeaa ONLINE 0 0 0 gptid/ff59dfe8-c9a8-11e5-8f82-0025902afeaa ONLINE 0 0 0 gptid/019bacb8-c9a9-11e5-8f82-0025902afeaa ONLINE 0 0 0
I've had a few failed disks over the years, and I wasn't able to figure out how to replace them via the Corral GUI, so I did it via ZFS commands. Know it wasn't exactly kosher, but that's why there's a mix of gptid's and not.
I've tried exporting this via zpool export a couple times, but the GUI never lists it as an option for import in the drop-down.
Any ideas for what I could do?