zsaat14
Cadet
- Joined
- Jan 7, 2022
- Messages
- 3
I am trying to migrate from Core to SCALE. After booting to installation media (USB 3.0 128GB thumb drive), the installation freezes with the following info on the screen:
I made sure my BIOS was up to date (it was not, there were other errors before that the BIOS update fixed). Nothing came up when searching for the verbiage in the last line. The first line seems to indicate an error with the hard drives, but all drives had passed S.M.A.R.T. prior to upgrade. When I remove the installation media and reboot, Core boots just fine. Can someone point me in the right direction to get this working?
Here are all my hardware specs:
Mobo: ASRock Z97 Extreme6
CPU: Intel i3-4150
RAM: 4x4GB DDR3-1600
HDDs: 6x WD Red 1TB 2.5" (RAID Z1) (attached via SATA)
SSDs: 2x ADATA SP900 2.5" (Mirrored boot drives)(attached via SATA)
m.2 Plextor PX-G128M6e (don't think this is actually used, originally for cache)
PCIe: 1xRJ45 10/100/1000 NIC
[ 2.227877] ata9: softreset failed (device not ready)
[ 11.837875] ahci 0000:08:00.0: AHCI controller unavailable
[ 12.397876] pcieport 0000:06:01.0: can't change power state from D3cold to D0 (config space unavailable)
I made sure my BIOS was up to date (it was not, there were other errors before that the BIOS update fixed). Nothing came up when searching for the verbiage in the last line. The first line seems to indicate an error with the hard drives, but all drives had passed S.M.A.R.T. prior to upgrade. When I remove the installation media and reboot, Core boots just fine. Can someone point me in the right direction to get this working?
Here are all my hardware specs:
Mobo: ASRock Z97 Extreme6
CPU: Intel i3-4150
RAM: 4x4GB DDR3-1600
HDDs: 6x WD Red 1TB 2.5" (RAID Z1) (attached via SATA)
SSDs: 2x ADATA SP900 2.5" (Mirrored boot drives)(attached via SATA)
m.2 Plextor PX-G128M6e (don't think this is actually used, originally for cache)
PCIe: 1xRJ45 10/100/1000 NIC