I have a couple of servers with a few drives and one server with 22 data drives and 4 log devices (26 physical drives). starting with adding the larger 26 drive server it begins data collection and then removes the system with a message that disks exceed license noting 50 and 26. The other servers can be added. If I remove 2 of the log drives and add the server it adds successfully. I can add the log drives back, but after some time it removes the server and notes exceed 50 drive limit. Total of all disks across servers is less than 40. It seems like TrueCommand 3.0 is double counting the drives (24 works, 26 does not with a 50 total limit).