brentleychen
Cadet
- Joined
- Sep 17, 2022
- Messages
- 3
Hi everyone, I'm new to freedom and I've run into a problem.
Because the ssd cache has been used for two years, I used the following command as prompted, and today it had a problem and I uninstalled it.
Now in the web gui I can't re-add this pool, but using
I can see it, is there any way to make it normal.
These codes are reproduced by me in the test environment, and the amount of machine data I encounter is relatively large.
Because the ssd cache has been used for two years, I used the following command as prompted, and today it had a problem and I uninstalled it.
zpool import -F DATA
Now in the web gui I can't re-add this pool, but using
root@freenas[~]# zpool status data
pool: data
state: ONLINE
scan: resilvered 644K in 0 days 00:00:00 with 0 errors on Sat Sep 17 05:21:27 2022
config:
NAME STATE READ WRITE CKSUM
data ONLINE 0 0 0
mirror-0 ONLINE 0 0 0
gptid/7e6ea525-3680-11ed-87a2-001631faa5a0 ONLINE 0 0 0
gptid/7fc8a0e3-3680-11ed-87a2-001631faa5a0 ONLINE 0 0 0
errors: No known data errors
root@freenas[~]# zpool list data
NAME SIZE ALLOC FREE CKPOINT EXPANDSZ FRAG CAP DEDUP HEALTH ALTROOT
data 57.5G 1.52G 56.0G - - 0% 2% 1.00x ONLINE -
I can see it, is there any way to make it normal.
These codes are reproduced by me in the test environment, and the amount of machine data I encounter is relatively large.