I have two mirrored drives with a spare for 3 x 3TB drives.
All drives are hot swapable.
When I pull ada4p2 for example the status of the pool stays the same with no degregation. When I pull drive from the first pair the same result no degregation.
Is this correct behavior?
Current status:
Pulled ada4p2:
I will pull ada1p2 now:
All drives are hot swapable.
When I pull ada4p2 for example the status of the pool stays the same with no degregation. When I pull drive from the first pair the same result no degregation.
Is this correct behavior?
Current status:
Code:
[root@freenas-2] ~# zpool status
pool: tank1
state: ONLINE
scrub: none requested
config:
NAME STATE READ WRITE CKSUM
tank1 ONLINE 0 0 0
mirror ONLINE 0 0 0
ada0p2 ONLINE 0 0 0
ada1p2 ONLINE 0 0 0
spares
ada2p2 AVAIL
errors: No known data errors
pool: tank2
state: ONLINE
scrub: none requested
config:
NAME STATE READ WRITE CKSUM
tank2 ONLINE 0 0 0
mirror ONLINE 0 0 0
ada3p2 ONLINE 0 0 0
ada4p2 ONLINE 0 0 0
spares
ada5p2 AVAIL
errors: No known data errors
Pulled ada4p2:
Code:
[root@freenas-2] ~# zpool status
pool: tank1
state: ONLINE
scrub: none requested
config:
NAME STATE READ WRITE CKSUM
tank1 ONLINE 0 0 0
mirror ONLINE 0 0 0
ada0p2 ONLINE 0 0 0
ada1p2 ONLINE 0 0 0
spares
ada2p2 AVAIL
errors: No known data errors
pool: tank2
state: ONLINE
scrub: none requested
config:
NAME STATE READ WRITE CKSUM
tank2 ONLINE 0 0 0
mirror ONLINE 0 0 0
ada3p2 ONLINE 0 0 0
ada4p2 ONLINE 0 0 0
spares
ada5p2 AVAIL
errors: No known data errors
I will pull ada1p2 now:
Code:
[root@freenas-2] ~# zpool status
pool: tank1
state: ONLINE
scrub: none requested
config:
NAME STATE READ WRITE CKSUM
tank1 ONLINE 0 0 0
mirror ONLINE 0 0 0
ada0p2 ONLINE 0 0 0
ada1p2 ONLINE 0 0 0
spares
ada2p2 AVAIL
errors: No known data errors
pool: tank2
state: ONLINE
scrub: none requested
config:
NAME STATE READ WRITE CKSUM
tank2 ONLINE 0 0 0
mirror ONLINE 0 0 0
ada3p2 ONLINE 0 0 0
ada4p2 ONLINE 0 0 0
spares
ada5p2 AVAIL
errors: No known data errors