System will freeze while booting after upgrade/fresh install

Status
Not open for further replies.

pschatz100

Guru
Joined
Mar 30, 2014
Messages
1,184
I presume your 32gb usb stick is USB3 capable, where an older 8gb may not be. Have you tried different USB ports? Some folks have reported problems when trying to boot from a USB3 port. In some of these instances, using a USB2 port worked. Also, at least one person commented that his system would boot after disabling USB3 support in his bios.

Although this may not be your problem, it is well documented that FreeNAS and USB3 do not play well together.
 
Last edited:

Bmck26

Dabbler
Joined
Dec 9, 2013
Messages
48
I got it to work with the 32gb stick. I was using a usb 2.0 port but I disabled usb 3.0 in the BIOS anyway. Turns out that wasn't the problem. Win32 Disk Imager didn't write to the installation usb correctly on my desktop. I don't what was causing it. I busted out my work laptop, used Hard Disk Wipe Tool from HDDGURU.com to wipe the usb stick, and tried again with Disk Imager from the laptop. Everything worked fine.
 

pschatz100

Guru
Joined
Mar 30, 2014
Messages
1,184
Glad you got it working.
 

cyberjock

Inactive Account
Joined
Mar 25, 2012
Messages
19,525
Status
Not open for further replies.
Top