Chris Dill
Contributor
- Joined
- Jan 1, 2014
- Messages
- 116
I am building my second FreeNAS, this time I went by the hardware guide on this forum. I put in all of the moving parts, and when I boot I get no VGA and no post. I get 5 rapid beeps which means memory configuration error. I have looked and looked, and as far as I can tell I have the right stuff in this box. Can any of you wizards who might have dealt with this mobo give me any insight?
Motherboard: X10SLL-F
On the Tested Memory sheet, 1600Mhz ECC 8 GB it lists this as tested RAM:
MEM-DR380L-HL01-EU16 Hynix HMT41GU7MFR8C-PB Hynix H5TQ4G83MFR 2 RoHS Low Profile
The RAM I purchased was from eBay 2x 8GB sticks and has a product number of HMT41GE7MFR8C-PB.
The processor I purchased is: Intel E3-1220v3 SR154 3.1GHz/8M/5GTs LGA1150 Xeon 80W CPU Processor
Any tips and insight would be helpful- I read some posts about having to flash new bios using IPMI, but that was only for brand new processors, which this is not. Thanks!
Motherboard: X10SLL-F
On the Tested Memory sheet, 1600Mhz ECC 8 GB it lists this as tested RAM:
MEM-DR380L-HL01-EU16 Hynix HMT41GU7MFR8C-PB Hynix H5TQ4G83MFR 2 RoHS Low Profile
The RAM I purchased was from eBay 2x 8GB sticks and has a product number of HMT41GE7MFR8C-PB.
The processor I purchased is: Intel E3-1220v3 SR154 3.1GHz/8M/5GTs LGA1150 Xeon 80W CPU Processor
Any tips and insight would be helpful- I read some posts about having to flash new bios using IPMI, but that was only for brand new processors, which this is not. Thanks!