Hello there.
A couple of days ago I noticed that I suddenly have got very bad performance on my FreeNAS box.
I'm usually able to transfer files at speeds up to 65 mb/s between the drives on my FreeNAS box, and up to 85 mb/s when transferring files from my desktop to my FreeNAS.
But now, I can max get 1.2 mb/s in transfer speed? I haven't changed anything on the system before this happened.
The slow transfer speed occurs both on CIFS and FTP.
Heres my system specs:
FreeNAS-9.1.1-RELEASE-x64
CPU: AMD A4-3300 APU 2.5 Ghz
Mobo: MSI A55M-P35
RAM: 16GB Kingston HyperX Blu 2x8 GB 1600 Mhz
Harddrive setup:
2x2 TB WD Green EARX in RAID1 (Used for storing all my pictures, movies and music)
1x1 TB WD Red (Used for jails)
1x1 TB Seagate Barracuda 7200RPM + 2x500GB Seagate Barracuda 7200RPM in RAID0 (used for storing a lot of temporary files, not anything important).
Everything looks fine when I run zpool status and zpool list.
I've been searching for the forums here for hours to try to find a solution to my problem, but I didn't manage to find anything that could help out my problem, so I really hope that some you guys in here can point me in the right direction, because this is really annoying me since I'm moving around a lot files almost every day.
Thanks in advance.
A couple of days ago I noticed that I suddenly have got very bad performance on my FreeNAS box.
I'm usually able to transfer files at speeds up to 65 mb/s between the drives on my FreeNAS box, and up to 85 mb/s when transferring files from my desktop to my FreeNAS.
But now, I can max get 1.2 mb/s in transfer speed? I haven't changed anything on the system before this happened.
The slow transfer speed occurs both on CIFS and FTP.
Heres my system specs:
FreeNAS-9.1.1-RELEASE-x64
CPU: AMD A4-3300 APU 2.5 Ghz
Mobo: MSI A55M-P35
RAM: 16GB Kingston HyperX Blu 2x8 GB 1600 Mhz
Harddrive setup:
2x2 TB WD Green EARX in RAID1 (Used for storing all my pictures, movies and music)
1x1 TB WD Red (Used for jails)
1x1 TB Seagate Barracuda 7200RPM + 2x500GB Seagate Barracuda 7200RPM in RAID0 (used for storing a lot of temporary files, not anything important).
Everything looks fine when I run zpool status and zpool list.
I've been searching for the forums here for hours to try to find a solution to my problem, but I didn't manage to find anything that could help out my problem, so I really hope that some you guys in here can point me in the right direction, because this is really annoying me since I'm moving around a lot files almost every day.
Thanks in advance.