nhmilleraz
Cadet
- Joined
- Aug 24, 2015
- Messages
- 5
Struggling to replace failed disk – Can Not Offline Disk
I have recently inherited an environment that includes a FreeNAS system and am having some challenges resolving an issue with a disk that is pending failure. I’m an old network guy (WAN) with some ancient unix background (think SunOS era stuff) so please be gentle if I’ve missed stupid stuff. I’ve searched this forum and other web sources and tried the routinely recommended actions with no luck.
Basic System Information (copied from the System > System Information screen)… The system is an HP DL180-G6 with 12 2TB drives / 8gb of memory and… well – you see below and in dmesg…
So – the details of the problem:
The disk in question appears healthy to FreeNAS but SMART is routinely presenting the following error:
I have attempted to follow the instructions for replacing the disk which I find here: http://doc.freenas.org/9.3/freenas_storage.html#replacing-a-failed-drive
When I attempt to off-line the drive in question I get the following message:
Numerous sources suggest running a scrub and retrying – which I have done without any change in behavior (I’ve also scheduled a weekly scrub as there was nothing of that nature in place).
I finish the scrub and get the same message.
So – two primary questions:
1) I am unable to offline the offending disk to replace it…
2) I suspect that this may be a function of how the file system was mapped to the disks and that the disks appear to be set up as RAID 0 devices as opposed to JBOD – but I’m not sure.
The system in question is an HP DL180 G6 with 12 X 2TB SAS disks. The disk in question reports 46 unresolved errors. I’ve purchased a replacement disk as a precaution.
The system in question contains ALL of the businesses critical data (including years of work product). I have completed a very simple “backup” of data (duplicated the file sets in their most critical shares to a separate and now off-line disk, so losing the file system would not result in huge data loss – but it would seriously impact productivity until I get things back up. Given that the errors on the disk appear to be minimal (at the moment) I’m moving cautiously regarding changes.
Advice on how to proceed?
Thanks in advance!
ADDITIONAL INFORMATION
Dmesg
smartctl For the drive in question:
I have recently inherited an environment that includes a FreeNAS system and am having some challenges resolving an issue with a disk that is pending failure. I’m an old network guy (WAN) with some ancient unix background (think SunOS era stuff) so please be gentle if I’ve missed stupid stuff. I’ve searched this forum and other web sources and tried the routinely recommended actions with no luck.
Basic System Information (copied from the System > System Information screen)… The system is an HP DL180-G6 with 12 2TB drives / 8gb of memory and… well – you see below and in dmesg…
Code:
Hostname NAME_REPLACED.local Build FreeNAS-9.2.1.7-RELEASE-x64 (fdbe9a0) Platform Intel(R) Xeon(R) CPU X5560 @ 2.80GHz Memory 8162MB System Time Mon Aug 24 07:09:35 MST 2015 Uptime 7:09AM up 1:22, 0 users Load Average 0.40, 0.67, 0.71 FreeNAS Version: FreeNAS-9.2.1.7-RELEASE-x64 (fdbe9a0)
So – the details of the problem:
The disk in question appears healthy to FreeNAS but SMART is routinely presenting the following error:
Code:
Device: /dev/ciss0 [cciss_disk_05] [SCSI], SMART Failure: HARDWARE IMPENDING FAILURE GENERAL HARD DRIVE FAILURE
I have attempted to follow the instructions for replacing the disk which I find here: http://doc.freenas.org/9.3/freenas_storage.html#replacing-a-failed-drive
When I attempt to off-line the drive in question I get the following message:
Code:
NAME_REPLACED manage.py: [middleware.exceptions:38] [MiddlewareError: Disk offline failed: "cannot offline gptid/9a193a6d-294e-11e4-a834-f4ce46829492: no valid replicas, "]
Numerous sources suggest running a scrub and retrying – which I have done without any change in behavior (I’ve also scheduled a weekly scrub as there was nothing of that nature in place).
I finish the scrub and get the same message.
So – two primary questions:
1) I am unable to offline the offending disk to replace it…
2) I suspect that this may be a function of how the file system was mapped to the disks and that the disks appear to be set up as RAID 0 devices as opposed to JBOD – but I’m not sure.
The system in question is an HP DL180 G6 with 12 X 2TB SAS disks. The disk in question reports 46 unresolved errors. I’ve purchased a replacement disk as a precaution.
The system in question contains ALL of the businesses critical data (including years of work product). I have completed a very simple “backup” of data (duplicated the file sets in their most critical shares to a separate and now off-line disk, so losing the file system would not result in huge data loss – but it would seriously impact productivity until I get things back up. Given that the errors on the disk appear to be minimal (at the moment) I’m moving cautiously regarding changes.
Advice on how to proceed?
Thanks in advance!
ADDITIONAL INFORMATION
Dmesg
Code:
[root@NAME_REPLACED] ~# dmesg Copyright (c) 1992-2013 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD is a registered trademark of The FreeBSD Foundation. FreeBSD 9.2-RELEASE-p10 #0 r262572+4fb5adc: Wed Aug 6 17:07:16 PDT 2014 root@build3.ixsystems.com:/fusion/jkh/921/freenas/os-base/amd64/fusion/jkh/921/freenas/FreeBSD/src/sys/FREENAS.amd64 amd64 gcc version 4.2.1 20070831 patched [FreeBSD] CPU: Intel(R) Xeon(R) CPU X5560 @ 2.80GHz (2800.16-MHz K8-class CPU) Origin = "GenuineIntel" Id = 0x106a5 Family = 0x6 Model = 0x1a Stepping = 5 Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE> Features2=0x9ce3bd<SSE3,DTES64,MON,DS_CPL,VMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,DCA,SSE4.1,SSE4.2,POPCNT> AMD Features=0x28100800<SYSCALL,NX,RDTSCP,LM> AMD Features2=0x1<LAHF> TSC: P-state invariant, performance statistics real memory = 8589934592 (8192 MB) avail memory = 8218636288 (7837 MB) Event timer "LAPIC" quality 400 ACPI APIC Table: <HP ProLiant> FreeBSD/SMP: Multiprocessor System Detected: 16 CPUs FreeBSD/SMP: 2 package(s) x 4 core(s) x 2 SMT threads cpu0 (BSP): APIC ID: 0 cpu1 (AP): APIC ID: 1 cpu2 (AP): APIC ID: 2 cpu3 (AP): APIC ID: 3 cpu4 (AP): APIC ID: 4 cpu5 (AP): APIC ID: 5 cpu6 (AP): APIC ID: 6 cpu7 (AP): APIC ID: 7 cpu8 (AP): APIC ID: 16 cpu9 (AP): APIC ID: 17 cpu10 (AP): APIC ID: 18 cpu11 (AP): APIC ID: 19 cpu12 (AP): APIC ID: 20 cpu13 (AP): APIC ID: 21 cpu14 (AP): APIC ID: 22 cpu15 (AP): APIC ID: 23 WARNING: VIMAGE (virtualized network stack) is a highly experimental feature. ioapic0 <Version 2.0> irqs 0-23 on motherboard ioapic1 <Version 2.0> irqs 24-47 on motherboard kbd1 at kbdmux0 cryptosoft0: <software crypto> on motherboard aesni0: No AESNI support. padlock0: No ACE support. acpi0: <HP ProLiant> on motherboard acpi0: Power Button (fixed) acpi0: reservation of 0, a0000 (3) failed acpi0: reservation of 100000, bff00000 (3) failed cpu0: <ACPI CPU> on acpi0 cpu1: <ACPI CPU> on acpi0 cpu2: <ACPI CPU> on acpi0 cpu3: <ACPI CPU> on acpi0 cpu4: <ACPI CPU> on acpi0 cpu5: <ACPI CPU> on acpi0 cpu6: <ACPI CPU> on acpi0 cpu7: <ACPI CPU> on acpi0 cpu8: <ACPI CPU> on acpi0 cpu9: <ACPI CPU> on acpi0 cpu10: <ACPI CPU> on acpi0 cpu11: <ACPI CPU> on acpi0 cpu12: <ACPI CPU> on acpi0 cpu13: <ACPI CPU> on acpi0 cpu14: <ACPI CPU> on acpi0 cpu15: <ACPI CPU> on acpi0 attimer0: <AT timer> port 0x40-0x43 irq 0 on acpi0 Timecounter "i8254" frequency 1193182 Hz quality 0 Event timer "i8254" frequency 1193182 Hz quality 100 atrtc0: <AT realtime clock> port 0x70-0x71 irq 8 on acpi0 Event timer "RTC" frequency 32768 Hz quality 0 hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0 Timecounter "HPET" frequency 14318180 Hz quality 950 Event timer "HPET" frequency 14318180 Hz quality 450 Event timer "HPET1" frequency 14318180 Hz quality 440 Event timer "HPET2" frequency 14318180 Hz quality 440 Event timer "HPET3" frequency 14318180 Hz quality 440 Timecounter "ACPI-fast" frequency 3579545 Hz quality 900 acpi_timer0: <24-bit timer at 3.579545MHz> port 0x808-0x80b on acpi0 pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0 pci0: <ACPI PCI bus> on pcib0 pcib1: <ACPI PCI-PCI bridge> at device 1.0 on pci0 pci7: <ACPI PCI bus> on pcib1 igb0: <Intel(R) PRO/1000 Network Connection version - 2.4.0> port 0xe880-0xe89f mem 0xfbe60000-0xfbe7ffff,0xfbe40000-0xfbe5ffff,0xfbeb8000-0xfbebbfff irq 28 at device 0.0 on pci7 igb0: Using MSIX interrupts with 9 vectors igb0: Ethernet address: f4:ce:46:82:94:92 igb0: Bound queue 0 to cpu 0 igb0: Bound queue 1 to cpu 1 igb0: Bound queue 2 to cpu 2 igb0: Bound queue 3 to cpu 3 igb0: Bound queue 4 to cpu 4 igb0: Bound queue 5 to cpu 5 igb0: Bound queue 6 to cpu 6 igb0: Bound queue 7 to cpu 7 igb1: <Intel(R) PRO/1000 Network Connection version - 2.4.0> port 0xec00-0xec1f mem 0xfbee0000-0xfbefffff,0xfbec0000-0xfbedffff,0xfbebc000-0xfbebffff irq 40 at device 0.1 on pci7 igb1: Using MSIX interrupts with 9 vectors igb1: Ethernet address: f4:ce:46:82:94:93 igb1: Bound queue 0 to cpu 8 igb1: Bound queue 1 to cpu 9 igb1: Bound queue 2 to cpu 10 igb1: Bound queue 3 to cpu 11 igb1: Bound queue 4 to cpu 12 igb1: Bound queue 5 to cpu 13 igb1: Bound queue 6 to cpu 14 igb1: Bound queue 7 to cpu 15 pcib2: <ACPI PCI-PCI bridge> at device 3.0 on pci0 pci6: <ACPI PCI bus> on pcib2 ciss0: <HP Smart Array P212> port 0xd800-0xd8ff mem 0xfbc00000-0xfbdfffff,0xfbbff000-0xfbbfffff irq 24 at device 0.0 on pci6 ciss0: PERFORMANT Transport pcib3: <ACPI PCI-PCI bridge> at device 7.0 on pci0 pci5: <ACPI PCI bus> on pcib3 pcib4: <ACPI PCI-PCI bridge> at device 9.0 on pci0 pci4: <ACPI PCI bus> on pcib4 pci0: <base peripheral, interrupt controller> at device 20.0 (no driver attached) pci0: <base peripheral, interrupt controller> at device 20.1 (no driver attached) pci0: <base peripheral, interrupt controller> at device 20.2 (no driver attached) uhci0: <Intel 82801JI (ICH10) USB controller USB-D> port 0xb800-0xb81f irq 16 at device 26.0 on pci0 uhci0: LegSup = 0x2400 usbus0 on uhci0 ehci0: <Intel 82801JI (ICH10) USB 2.0 controller USB-B> mem 0xfaff8000-0xfaff83ff irq 18 at device 26.7 on pci0 usbus1: EHCI version 1.0 usbus1 on ehci0 pcib5: <ACPI PCI-PCI bridge> irq 16 at device 28.0 on pci0 pci3: <ACPI PCI bus> on pcib5 pcib6: <ACPI PCI-PCI bridge> irq 16 at device 28.4 on pci0 pci2: <ACPI PCI bus> on pcib6 vgapci0: <VGA-compatible display> mem 0xf8000000-0xf8ffffff,0xfbafc000-0xfbafffff,0xfb000000-0xfb7fffff irq 16 at device 0.0 on pci2 uhci1: <Intel 82801JI (ICH10) USB controller USB-A> port 0xb880-0xb89f irq 23 at device 29.0 on pci0 uhci1: LegSup = 0x2400 usbus2 on uhci1 uhci2: <Intel 82801JI (ICH10) USB controller USB-B> port 0xbc00-0xbc1f irq 19 at device 29.1 on pci0 uhci2: LegSup = 0x2400 usbus3 on uhci2 uhci3: <Intel 82801JI (ICH10) USB controller USB-C> port 0xc000-0xc01f irq 18 at device 29.2 on pci0 uhci3: LegSup = 0x2400 usbus4 on uhci3 ehci1: <Intel 82801JI (ICH10) USB 2.0 controller USB-A> mem 0xfaffa000-0xfaffa3ff irq 23 at device 29.7 on pci0 usbus5: EHCI version 1.0 usbus5 on ehci1 pcib7: <ACPI PCI-PCI bridge> at device 30.0 on pci0 pci1: <ACPI PCI bus> on pcib7 isab0: <PCI-ISA bridge> at device 31.0 on pci0 isa0: <ISA bus> on isab0 ahci0: <Intel ICH10 AHCI SATA controller> port 0xc880-0xc887,0xc800-0xc803,0xc480-0xc487,0xc400-0xc403,0xc080-0xc09f mem 0xfaffc000-0xfaffc7ff irq 19 at device 31.2 on pci0 ahci0: AHCI v1.20 with 6 3Gbps ports, Port Multiplier not supported ahcich0: <AHCI channel> at channel 0 on ahci0 ahcich1: <AHCI channel> at channel 1 on ahci0 ahcich2: <AHCI channel> at channel 2 on ahci0 ahcich3: <AHCI channel> at channel 3 on ahci0 ahcich4: <AHCI channel> at channel 4 on ahci0 ahcich5: <AHCI channel> at channel 5 on ahci0 acpi_button0: <Power Button> on acpi0 uart0: <16550 or compatible> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0 qpi0: <QPI system bus> on motherboard pcib8: <QPI Host-PCI bridge> pcibus 255 on qpi0 pci255: <PCI bus> on pcib8 pcib9: <QPI Host-PCI bridge> pcibus 254 on qpi0 pci254: <PCI bus> on pcib9 ichwd0 on isa0 ichwd0: ICH WDT present but disabled in BIOS or hardware device_attach: ichwd0 attach returned 6 ichwd0 at port 0x830-0x837,0x860-0x87f on isa0 ichwd0: ICH WDT present but disabled in BIOS or hardware device_attach: ichwd0 attach returned 6 orm0: <ISA Option ROMs> at iomem 0xc0000-0xc7fff,0xc8000-0xc8fff,0xc9000-0xccfff on isa0 sc0: <System console> at flags 0x100 on isa0 sc0: VGA <16 virtual consoles, flags=0x300> vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0 atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0 atkbd0: <AT Keyboard> irq 1 on atkbdc0 kbd0 at atkbd0 atkbd0: [GIANT-LOCKED] wbwd0: HEFRAS and EFER do not align: EFER 0x2e DevID 0xff DevRev 0xff CR26 0xff coretemp0: <CPU On-Die Thermal Sensors> on cpu0 est0: <Enhanced SpeedStep Frequency Control> on cpu0 p4tcc0: <CPU Frequency Thermal Control> on cpu0 coretemp1: <CPU On-Die Thermal Sensors> on cpu1 est1: <Enhanced SpeedStep Frequency Control> on cpu1 p4tcc1: <CPU Frequency Thermal Control> on cpu1 coretemp2: <CPU On-Die Thermal Sensors> on cpu2 est2: <Enhanced SpeedStep Frequency Control> on cpu2 p4tcc2: <CPU Frequency Thermal Control> on cpu2 coretemp3: <CPU On-Die Thermal Sensors> on cpu3 est3: <Enhanced SpeedStep Frequency Control> on cpu3 p4tcc3: <CPU Frequency Thermal Control> on cpu3 coretemp4: <CPU On-Die Thermal Sensors> on cpu4 est4: <Enhanced SpeedStep Frequency Control> on cpu4 p4tcc4: <CPU Frequency Thermal Control> on cpu4 coretemp5: <CPU On-Die Thermal Sensors> on cpu5 est5: <Enhanced SpeedStep Frequency Control> on cpu5 p4tcc5: <CPU Frequency Thermal Control> on cpu5 coretemp6: <CPU On-Die Thermal Sensors> on cpu6 est6: <Enhanced SpeedStep Frequency Control> on cpu6 p4tcc6: <CPU Frequency Thermal Control> on cpu6 coretemp7: <CPU On-Die Thermal Sensors> on cpu7 est7: <Enhanced SpeedStep Frequency Control> on cpu7 p4tcc7: <CPU Frequency Thermal Control> on cpu7 coretemp8: <CPU On-Die Thermal Sensors> on cpu8 est8: <Enhanced SpeedStep Frequency Control> on cpu8 p4tcc8: <CPU Frequency Thermal Control> on cpu8 coretemp9: <CPU On-Die Thermal Sensors> on cpu9 est9: <Enhanced SpeedStep Frequency Control> on cpu9 p4tcc9: <CPU Frequency Thermal Control> on cpu9 coretemp10: <CPU On-Die Thermal Sensors> on cpu10 est10: <Enhanced SpeedStep Frequency Control> on cpu10 p4tcc10: <CPU Frequency Thermal Control> on cpu10 coretemp11: <CPU On-Die Thermal Sensors> on cpu11 est11: <Enhanced SpeedStep Frequency Control> on cpu11 p4tcc11: <CPU Frequency Thermal Control> on cpu11 coretemp12: <CPU On-Die Thermal Sensors> on cpu12 est12: <Enhanced SpeedStep Frequency Control> on cpu12 p4tcc12: <CPU Frequency Thermal Control> on cpu12 coretemp13: <CPU On-Die Thermal Sensors> on cpu13 est13: <Enhanced SpeedStep Frequency Control> on cpu13 p4tcc13: <CPU Frequency Thermal Control> on cpu13 coretemp14: <CPU On-Die Thermal Sensors> on cpu14 est14: <Enhanced SpeedStep Frequency Control> on cpu14 p4tcc14: <CPU Frequency Thermal Control> on cpu14 coretemp15: <CPU On-Die Thermal Sensors> on cpu15 est15: <Enhanced SpeedStep Frequency Control> on cpu15 p4tcc15: <CPU Frequency Thermal Control> on cpu15 Timecounters tick every 1.000 msec ipfw2 (+ipv6) initialized, divert enabled, nat enabled, default to accept, logging disabled DUMMYNET 0xfffffe0002fa1080 with IPv6 initialized (100409) load_dn_sched dn_sched RR loaded load_dn_sched dn_sched WF2Q+ loaded load_dn_sched dn_sched FIFO loaded load_dn_sched dn_sched PRIO loaded load_dn_sched dn_sched QFQ loaded usbus0: 12Mbps Full Speed USB v1.0 usbus1: 480Mbps High Speed USB v2.0 usbus2: 12Mbps Full Speed USB v1.0 usbus3: 12Mbps Full Speed USB v1.0 usbus4: 12Mbps Full Speed USB v1.0 usbus5: 480Mbps High Speed USB v2.0 ugen0.1: <Intel> at usbus0 uhub0: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus0 ugen1.1: <Intel> at usbus1 uhub1: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus1 ugen2.1: <Intel> at usbus2 uhub2: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus2 ugen3.1: <Intel> at usbus3 uhub3: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus3 ugen4.1: <Intel> at usbus4 uhub4: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus4 ugen5.1: <Intel> at usbus5 uhub5: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus5 da0 at ciss0 bus 0 scbus0 target 0 lun 0 da0: <COMPAQ RAID 0 OK> Fixed Direct Access SCSI-5 device da0: Serial Number PACCP9SXU6IM da0: 135.168MB/s transfers da0: Command Queueing enabled da0: 1907697MB (3906963632 512 byte sectors: 255H 32S/T 65535C) da0: quirks=0x1<NO_SYNC_CACHE> da1 at ciss0 bus 0 scbus0 target 1 lun 0 da1: <COMPAQ RAID 0 OK> Fixed Direct Access SCSI-5 device da1: Serial Number PACCP9SXU6IM da1: 135.168MB/s transfers da1: Command Queueing enabled da1: 1907697MB (3906963632 512 byte sectors: 255H 32S/T 65535C) da1: quirks=0x1<NO_SYNC_CACHE> da2 at ciss0 bus 0 scbus0 target 2 lun 0 da2: <COMPAQ RAID 0 OK> Fixed Direct Access SCSI-5 device da2: Serial Number PACCP9SXU6IM da2: 135.168MB/s transfers da2: Command Queueing enabled da2: 1907697MB (3906963632 512 byte sectors: 255H 32S/T 65535C) da2: quirks=0x1<NO_SYNC_CACHE> da3 at ciss0 bus 0 scbus0 target 3 lun 0 da3: <COMPAQ RAID 0 OK> Fixed Direct Access SCSI-5 device da3: Serial Number PACCP9SXU6IM da3: 135.168MB/s transfers da3: Command Queueing enabled da3: 1907697MB (3906963632 512 byte sectors: 255H 32S/T 65535C) da3: quirks=0x1<NO_SYNC_CACHE> da4 at ciss0 bus 0 scbus0 target 4 lun 0 da4: <COMPAQ RAID 0 OK> Fixed Direct Access SCSI-5 device da4: Serial Number PACCP9SXU6IM da4: 135.168MB/s transfers da4: Command Queueing enabled da4: 1907697MB (3906963632 512 byte sectors: 255H 32S/T 65535C) da4: quirks=0x1<NO_SYNC_CACHE> da5 at ciss0 bus 0 scbus0 target 5 lun 0 da5: <COMPAQ RAID 0 OK> Fixed Direct Access SCSI-5 device da5: Serial Number PACCP9SXU6IM da5: 135.168MB/s transfers da5: Command Queueing enabled da5: 1907697MB (3906963632 512 byte sectors: 255H 32S/T 65535C) da5: quirks=0x1<NO_SYNC_CACHE> da6 at ciss0 bus 0 scbus0 target 6 lun 0 da6: <COMPAQ RAID 0 OK> Fixed Direct Access SCSI-5 device da6: Serial Number PACCP9SXU6IM da6: 135.168MB/s transfers da6: Command Queueing enabled da6: 1907697MB (3906963632 512 byte sectors: 255H 32S/T 65535C) da6: quirks=0x1<NO_SYNC_CACHE> da7 at ciss0 bus 0 scbus0 target 7 lun 0 da7: <COMPAQ RAID 0 OK> Fixed Direct Access SCSI-5 device da7: Serial Number PACCP9SXU6IM da7: 135.168MB/s transfers da7: Command Queueing enabled da7: 1907697MB (3906963632 512 byte sectors: 255H 32S/T 65535C) da7: quirks=0x1<NO_SYNC_CACHE> da8 at ciss0 bus 0 scbus0 target 8 lun 0 da8: <COMPAQ RAID 0 OK> Fixed Direct Access SCSI-5 device da8: Serial Number PACCP9SXU6IM da8: 135.168MB/s transfers da8: Command Queueing enabled da8: 1907697MB (3906963632 512 byte sectors: 255H 32S/T 65535C) da8: quirks=0x1<NO_SYNC_CACHE> da9 at ciss0 bus 0 scbus0 target 9 lun 0 da9: <COMPAQ RAID 0 OK> Fixed Direct Access SCSI-5 device da9: Serial Number PACCP9SXU6IM da9: 135.168MB/s transfers da9: Command Queueing enabled da9: 1907697MB (3906963632 512 byte sectors: 255H 32S/T 65535C) da9: quirks=0x1<NO_SYNC_CACHE> da10 at ciss0 bus 0 scbus0 target 10 lun 0 da10: <COMPAQ RAID 0 OK> Fixed Direct Access SCSI-5 device da10: Serial Number PACCP9SXU6IM da10: 135.168MB/s transfers da10: Command Queueing enabled da10: 1907697MB (3906963632 512 byte sectors: 255H 32S/T 65535C) da10: quirks=0x1<NO_SYNC_CACHE> da11 at ciss0 bus 0 scbus0 target 11 lun 0 da11: <COMPAQ RAID 0 OK> Fixed Direct Access SCSI-5 device da11: Serial Number PACCP9SXU6IM da11: 135.168MB/s transfers da11: Command Queueing enabled da11: 1907697MB (3906963632 512 byte sectors: 255H 32S/T 65535C) da11: quirks=0x1<NO_SYNC_CACHE> SMP: AP CPU #1 Launched! SMP: AP CPU #9 Launched! SMP: AP CPU #4 Launched! SMP: AP CPU #13 Launched! SMP: AP CPU #6 Launched! SMP: AP CPU #15 Launched! SMP: AP CPU #7 Launched! SMP: AP CPU #10 Launched! SMP: AP CPU #3 Launched! SMP: AP CPU #11 Launched! SMP: AP CPU #5 Launched! SMP: AP CPU #8 Launched! SMP: AP CPU #2 Launched! SMP: AP CPU #14 Launched! SMP: AP CPU #12 Launched! Timecounter "TSC-low" frequency 1400077924 Hz quality 1000 uhub0: 2 ports with 2 removable, self powered uhub2: 2 ports with 2 removable, self powered uhub3: 2 ports with 2 removable, self powered uhub4: 2 ports with 2 removable, self powered uhub1: 2 ports with 2 removable, self powered uhub5: 6 ports with 6 removable, self powered ugen5.2: <Generic> at usbus5 umass0: <Generic Mass Storage, class 0/0, rev 2.00/1.05, addr 2> on usbus5 umass0: SCSI over Bulk-Only; quirks = 0x4101 umass0:9:0:-1: Attached to scbus9 da12 at umass-sim0 bus 0 scbus9 target 0 lun 0 da12: <Generic Flash Disk 8.07> Removable Direct Access SCSI-2 device da12: Serial Number 9A73589E da12: 40.000MB/s transfers da12: 2033MB (4164608 512 byte sectors: 255H 63S/T 259C) da12: quirks=0x2<NO_6_BYTE> Trying to mount root from ufs:/dev/ufs/FreeNASs1a [ro]... WARNING: /data was not properly dismounted GEOM_RAID5: Module loaded, version 1.1.20130907.44 (rev 5c6d2a159411) ZFS filesystem version: 5 ZFS storage pool version: features support (5000) GEOM_ELI: Device da0p1.eli created. GEOM_ELI: Encryption: AES-XTS 256 GEOM_ELI: Crypto: software GEOM_ELI: Device da1p1.eli created. GEOM_ELI: Encryption: AES-XTS 256 GEOM_ELI: Crypto: software GEOM_ELI: Device da2p1.eli created. GEOM_ELI: Encryption: AES-XTS 256 GEOM_ELI: Crypto: software GEOM_ELI: Device da3p1.eli created. GEOM_ELI: Encryption: AES-XTS 256 GEOM_ELI: Crypto: software GEOM_ELI: Device da4p1.eli created. GEOM_ELI: Encryption: AES-XTS 256 GEOM_ELI: Crypto: software GEOM_ELI: Device da5p1.eli created. GEOM_ELI: Encryption: AES-XTS 256 GEOM_ELI: Crypto: software GEOM_ELI: Device da6p1.eli created. GEOM_ELI: Encryption: AES-XTS 256 GEOM_ELI: Crypto: software GEOM_ELI: Device da7p1.eli created. GEOM_ELI: Encryption: AES-XTS 256 GEOM_ELI: Crypto: software GEOM_ELI: Device da8p1.eli created. GEOM_ELI: Encryption: AES-XTS 256 GEOM_ELI: Crypto: software GEOM_ELI: Device da9p1.eli created. GEOM_ELI: Encryption: AES-XTS 256 GEOM_ELI: Crypto: software GEOM_ELI: Device da10p1.eli created. GEOM_ELI: Encryption: AES-XTS 256 GEOM_ELI: Crypto: software GEOM_ELI: Device da11p1.eli created. GEOM_ELI: Encryption: AES-XTS 256 GEOM_ELI: Crypto: software vboxdrv: fAsync=0 offMin=0x248 offMax=0x4a5e bridge0: Ethernet address: 02:9b:8c:26:45:00 igb0: promiscuous mode enabled bridge0: link state changed to UP epair0a: Ethernet address: 02:cc:5b:00:0c:0a epair0b: Ethernet address: 02:cc:5b:00:0d:0b epair0a: link state changed to UP epair0b: link state changed to UP epair0a: promiscuous mode enabled igb0: link state changed to DOWN ng_ether_ifnet_arrival_event: can't re-name node epair0b igb0: link state changed to UP epair1a: Ethernet address: 02:c3:5b:00:0d:0a epair1b: Ethernet address: 02:c3:5b:00:0e:0b epair1a: link state changed to UP epair1b: link state changed to UP epair1a: promiscuous mode enabled ng_ether_ifnet_arrival_event: can't re-name node epair1b epair2a: Ethernet address: 02:78:60:00:0e:0a epair2b: Ethernet address: 02:78:60:00:0f:0b epair2a: link state changed to UP epair2b: link state changed to UP epair2a: promiscuous mode enabled ng_ether_ifnet_arrival_event: can't re-name node epair2b GEOM_ELI: Device da5p1.eli destroyed. GEOM_ELI: Detached da5p1.eli on last close. arp: 192.168.0.17 moved from 02:78:60:00:0e:0a to f4:ce:46:82:94:92 on epair2b arp: 192.168.0.17 moved from 02:c3:5b:00:0d:0a to f4:ce:46:82:94:92 on epair1b arp: 192.168.0.17 moved from 02:cc:5b:00:0c:0a to f4:ce:46:82:94:92 on epair0b
smartctl For the drive in question:
Code:
[root@NAME_REPLACED] ~# smartctl -a --device=cciss,5 /dev/ciss0 smartctl 6.2 2013-07-26 r3841 [FreeBSD 9.2-RELEASE-p10 amd64] (local build) Copyright (C) 2002-13, Bruce Allen, Christian Franke, www.smartmontools.org /dev/ciss0 [cciss_disk_05] [SCSI]: Device open changed type from 'sat,auto+cciss' to 'cciss' === START OF INFORMATION SECTION === Vendor: SEAGATE Product: ST32000SSSUN2.0T Revision: 0514 User Capacity: 2,000,398,934,016 bytes [2.00 TB] Logical block size: 512 bytes Rotation Rate: 7202 rpm Device type: disk Transport protocol: SAS Local Time is: Mon Aug 24 06:59:54 2015 MST SMART support is: Available - device has SMART capability. SMART support is: Enabled Temperature Warning: Enabled === START OF READ SMART DATA SECTION === SMART Health Status: HARDWARE IMPENDING FAILURE GENERAL HARD DRIVE FAILURE [asc=5d, ascq=10] Current Drive Temperature: 38 C Drive Trip Temperature: 68 C Manufactured in week 42 of year 2010 Specified cycle count over device lifetime: 10000 Accumulated start-stop cycles: 61 Specified load-unload count over device lifetime: 300000 Accumulated load-unload cycles: 61 Elements in grown defect list: 219 Vendor (Seagate) cache information Blocks sent to initiator = 417260609 Blocks received from initiator = 3296184888 Blocks read from cache and sent to initiator = 1808591969 Number of read and write commands whose size <= segment size = 54421900 Number of read and write commands whose size > segment size = 0 Vendor (Seagate/Hitachi) factory information number of hours powered up = 10926.33 number of minutes until next internal SMART test = 4 Error counter log: Errors Corrected by Total Correction Gigabytes Total ECC rereads/ errors algorithm processed uncorrected fast | delayed rewrites corrected invocations [10^9 bytes] errors read: 624192224 48 0 624192272 624192546 16315.393 274 write: 0 0 0 0 0 6113.069 0 verify: 4482 0 0 4482 4482 0.078 0 Non-medium error count: 27 SMART Self-test log Num Test Status segment LifeTime LBA_first_err [SK ASC ASQ] Description number (hours) # 1 Background long Completed - 10924 - [- - -] # 2 Background long Completed - 10912 - [- - -] # 3 Background long Completed - 10900 - [- - -] # 4 Background long Completed - 10888 - [- - -] # 5 Background long Completed - 10876 - [- - -] # 6 Background long Completed - 10869 - [- - -] # 7 Background long Completed - 10852 - [- - -] # 8 Background long Completed - 10840 - [- - -] # 9 Background long Completed - 10828 - [- - -] #10 Background long Completed - 10817 - [- - -] #11 Background long Completed - 10804 - [- - -] #12 Background long Completed - 10793 - [- - -] #13 Background long Completed - 10780 - [- - -] #14 Background long Completed - 10768 - [- - -] #15 Background long Completed - 10756 - [- - -] #16 Background long Completed - 10744 - [- - -] #17 Background long Completed - 10732 - [- - -] #18 Background long Completed - 10720 - [- - -] #19 Background long Completed - 10708 - [- - -] #20 Background long Completed - 10696 - [- - -] Long (extended) Self Test duration: 18500 seconds [308.3 minutes]
Last edited: