Hello
I recently build a new storage server with TrueNAS Scale which works great so far.
But I have a strange problem with the mapping of the disks to their physical slots.
All disks are shown in the same enclosure/slot. It also changes from time to time.
I've seen 2/56 and 2/8 so far.
This is not really a big problem, because all works so far.
But the IPMI (HP iLO) shows some strange Mapping too, and I can't use sas2ircu to flash the bay LEDs.
Are there some settings to change this mapping behavior?
I already erased and reflashed the 9211-8i since I had to update it anyway.
OS Version: TrueNAS-SCALE-22.02.1
Server: HPE DL380e Gen8 with 12+2 HDD Slots (HP backplane with integrated expander)
HBA: LSI SAS9211-8i
I recently build a new storage server with TrueNAS Scale which works great so far.
But I have a strange problem with the mapping of the disks to their physical slots.
All disks are shown in the same enclosure/slot. It also changes from time to time.
I've seen 2/56 and 2/8 so far.
This is not really a big problem, because all works so far.
But the IPMI (HP iLO) shows some strange Mapping too, and I can't use sas2ircu to flash the bay LEDs.
Are there some settings to change this mapping behavior?
I already erased and reflashed the 9211-8i since I had to update it anyway.
OS Version: TrueNAS-SCALE-22.02.1
Server: HPE DL380e Gen8 with 12+2 HDD Slots (HP backplane with integrated expander)
HBA: LSI SAS9211-8i
Code:
root@XXXXXX[~]# sas2flash -c 0 -list
LSI Corporation SAS2 Flash Utility
Version 20.00.00.00 (2014.09.18)
Copyright (c) 2008-2014 LSI Corporation. All rights reserved
Adapter Selected is a LSI SAS: SAS2008(B2)
Controller Number : 0
Controller : SAS2008(B2)
PCI Address : 00:0d:00:00
SAS Address : 500605b-0-XXXX-XXXX
NVDATA Version (Default) : 14.01.00.08
NVDATA Version (Persistent) : 14.01.00.08
Firmware Product ID : 0x2213 (IT)
Firmware Version : 20.00.07.00
NVDATA Vendor : LSI
NVDATA Product ID : SAS9211-8i
BIOS Version : N/A
UEFI BSD Version : N/A
FCODE Version : N/A
Board Name : SAS9211-8i
Board Assembly : N/A
Board Tracer Number : N/A
Finished Processing Commands Successfully.
Exiting SAS2Flash.
root@XXXXXX[~]# sas2ircu 0 DISPLAY
LSI Corporation SAS2 IR Configuration Utility.
Version 20.00.00.00 (2014.09.18)
Copyright (c) 2008-2014 LSI Corporation. All rights reserved.
Read configuration has been initiated for controller 0
------------------------------------------------------------------------
Controller information
------------------------------------------------------------------------
Controller type : SAS2008
BIOS version : 0.00.00.00
Firmware version : 20.00.07.00
Channel description : 1 Serial Attached SCSI
Initiator ID : 0
Maximum physical devices : 255
Concurrent commands supported : 3432
Slot : Unknown
Segment : 0
Bus : 13
Device : 0
Function : 0
RAID Support : No
------------------------------------------------------------------------
IR Volume information
------------------------------------------------------------------------
------------------------------------------------------------------------
Physical device information
------------------------------------------------------------------------
Initiator at ID #0
Device is a Enclosure services device
Enclosure # : 2
Slot # : 0
SAS Address : 5001438-0-XXXX-XXXX
State : Standby (SBY)
Manufacturer : HP
Model Number : Gen8 ServBP 12+2
Firmware Revision : 3.30
Serial No : PCv
GUID : N/A
Protocol : SAS
Device Type : Enclosure services device
Device is a Hard disk
Enclosure # : 2
Slot # : 56
SAS Address : 5000c50-0-55a3-56c5
State : Ready (RDY)
Size (in MB)/(in sectors) : 1907729/3907029167
Manufacturer : SEAGATE
Model Number : ST32000645SS
Firmware Revision : RS17
Serial No : XXXXXXXX
GUID : 5000c50055a356c7
Protocol : SAS
Drive Type : SAS_HDD
Device is a Hard disk
Enclosure # : 2
Slot # : 56
SAS Address : 5000c50-0-55a5-d18d
State : Ready (RDY)
Size (in MB)/(in sectors) : 1907729/3907029167
Manufacturer : SEAGATE
Model Number : ST32000645SS
Firmware Revision : RS17
Serial No : XXXXXXXX
GUID : 5000c50055a5d18f
Protocol : SAS
Drive Type : SAS_HDD
Device is a Hard disk
Enclosure # : 2
Slot # : 56
SAS Address : 5000c50-0-55a3-0299
State : Ready (RDY)
Size (in MB)/(in sectors) : 1907729/3907029167
Manufacturer : SEAGATE
Model Number : ST32000645SS
Firmware Revision : RS17
Serial No : XXXXXXXX
GUID : 5000c50055a3029b
Protocol : SAS
Drive Type : SAS_HDD
Device is a Hard disk
Enclosure # : 2
Slot # : 56
SAS Address : 5000c50-0-55a2-fbe9
State : Ready (RDY)
Size (in MB)/(in sectors) : 1907729/3907029167
Manufacturer : SEAGATE
Model Number : ST32000645SS
Firmware Revision : RS17
Serial No : XXXXXXXX
GUID : 5000c50055a2fbeb
Protocol : SAS
Drive Type : SAS_HDD
Device is a Hard disk
Enclosure # : 2
Slot # : 56
SAS Address : 5000c50-0-41a6-9e99
State : Ready (RDY)
Size (in MB)/(in sectors) : 1907729/3907029167
Manufacturer : SEAGATE
Model Number : ST32000645SS
Firmware Revision : RS17
Serial No : XXXXXXXX
GUID : 5000c50041a69e9b
Protocol : SAS
Drive Type : SAS_HDD
Device is a Hard disk
Enclosure # : 2
Slot # : 56
SAS Address : 5000c50-0-55a3-0205
State : Ready (RDY)
Size (in MB)/(in sectors) : 1907729/3907029167
Manufacturer : SEAGATE
Model Number : ST32000645SS
Firmware Revision : RS17
Serial No : XXXXXXXX
GUID : 5000c50055a30207
Protocol : SAS
Drive Type : SAS_HDD
Device is a Hard disk
Enclosure # : 2
Slot # : 56
SAS Address : 5000c50-0-55a7-c905
State : Ready (RDY)
Size (in MB)/(in sectors) : 1907729/3907029167
Manufacturer : SEAGATE
Model Number : ST32000645SS
Firmware Revision : RS17
Serial No : XXXXXXXX
GUID : 5000c50055a7c907
Protocol : SAS
Drive Type : SAS_HDD
Device is a Hard disk
Enclosure # : 2
Slot # : 56
SAS Address : 5000c50-0-55a2-e9d1
State : Ready (RDY)
Size (in MB)/(in sectors) : 1907729/3907029167
Manufacturer : SEAGATE
Model Number : ST32000645SS
Firmware Revision : RS17
Serial No : XXXXXXXX
GUID : 5000c50055a2e9d3
Protocol : SAS
Drive Type : SAS_HDD
Device is a Hard disk
Enclosure # : 2
Slot # : 56
SAS Address : 5000c50-0-55a4-26c9
State : Ready (RDY)
Size (in MB)/(in sectors) : 1907729/3907029167
Manufacturer : SEAGATE
Model Number : ST32000645SS
Firmware Revision : RS17
Serial No : XXXXXXXX
GUID : 5000c50055a426cb
Protocol : SAS
Drive Type : SAS_HDD
Device is a Hard disk
Enclosure # : 2
Slot # : 56
SAS Address : 5000c50-0-55a2-eb79
State : Ready (RDY)
Size (in MB)/(in sectors) : 1907729/3907029167
Manufacturer : SEAGATE
Model Number : ST32000645SS
Firmware Revision : RS17
Serial No : XXXXXXXX
GUID : 5000c50055a2eb7b
Protocol : SAS
Drive Type : SAS_HDD
Device is a Hard disk
Enclosure # : 2
Slot # : 56
SAS Address : 5000c50-0-55a8-0a61
State : Ready (RDY)
Size (in MB)/(in sectors) : 1907729/3907029167
Manufacturer : SEAGATE
Model Number : ST32000645SS
Firmware Revision : RS17
Serial No : XXXXXXXX
GUID : 5000c50055a80a63
Protocol : SAS
Drive Type : SAS_HDD
Device is a Hard disk
Enclosure # : 2
Slot # : 56
SAS Address : 5000c50-0-41a1-b749
State : Ready (RDY)
Size (in MB)/(in sectors) : 1907729/3907029167
Manufacturer : SEAGATE
Model Number : ST32000645SS
Firmware Revision : RS17
Serial No : XXXXXXXX
GUID : 5000c50041a1b74b
Protocol : SAS
Drive Type : SAS_HDD
Device is a Hard disk
Enclosure # : 2
Slot # : 56
SAS Address : 5000c50-0-41a5-fbe5
State : Ready (RDY)
Size (in MB)/(in sectors) : 1907729/3907029167
Manufacturer : SEAGATE
Model Number : ST32000645SS
Firmware Revision : RS17
Serial No : XXXXXXXX
GUID : 5000c50041a5fbe7
Protocol : SAS
Drive Type : SAS_HDD
Device is a Hard disk
Enclosure # : 2
Slot # : 56
SAS Address : 5000c50-0-55a2-e579
State : Ready (RDY)
Size (in MB)/(in sectors) : 1907729/3907029167
Manufacturer : SEAGATE
Model Number : ST32000645SS
Firmware Revision : RS17
Serial No : XXXXXXXX
GUID : 5000c50055a2e57b
Protocol : SAS
Drive Type : SAS_HDD
------------------------------------------------------------------------
Enclosure information
------------------------------------------------------------------------
Enclosure# : 1
Logical ID : 500605b0:02c8f3de
Numslots : 8
StartSlot : 0
Enclosure# : 2
Logical ID : 50014380:28768e80
Numslots : 25
StartSlot : 0
------------------------------------------------------------------------
SAS2IRCU: Command DISPLAY Completed Successfully.
SAS2IRCU: Utility Completed Successfully.
