Storage1 DEGRADED

[BamBamm]

Should I just restart my server and see if it doesn't clear up?

Code:

Checking status of zfs pools:
NAME           SIZE  ALLOC   FREE  EXPANDSZ   FRAG    CAP  DEDUP  HEALTH  ALTROOT
Storage1      21.8T   598G  21.2T         -     0%     2%  1.00x  DEGRADED  /mnt
freenas-boot  14.9G  1.04G  13.8G         -      -     6%  1.00x  ONLINE  -

  pool: Storage1
state: DEGRADED
status: One or more devices are faulted in response to persistent errors.
        Sufficient replicas exist for the pool to continue functioning in a
        degraded state.
action: Replace the faulted device, or use 'zpool clear' to mark the device
        repaired.
  scan: scrub repaired 0 in 0h7m with 0 errors on Sun Dec 27 00:07:19 2015
config:

        NAME                                            STATE     READ WRITE CKSUM
        Storage1                                        DEGRADED     0     0     0
          raidz2-0                                      DEGRADED     0     0     0
            gptid/e6f08ef5-6de8-11e5-89c5-00259098d9fa  ONLINE       0     0     0
            gptid/e74f7d45-6de8-11e5-89c5-00259098d9fa  FAULTED      0   869     0  too many errors
            gptid/e7b66360-6de8-11e5-89c5-00259098d9fa  ONLINE       0     0     0
            gptid/e819ba6e-6de8-11e5-89c5-00259098d9fa  ONLINE       0     0     0
            gptid/e8873aa7-6de8-11e5-89c5-00259098d9fa  ONLINE       0     0     0
            gptid/e8f0a6de-6de8-11e5-89c5-00259098d9fa  ONLINE       0     0     0
          raidz2-1                                      ONLINE       0     0     0
            gptid/e9667155-6de8-11e5-89c5-00259098d9fa  ONLINE       0     0     0
            gptid/e9ccaa14-6de8-11e5-89c5-00259098d9fa  ONLINE       0     0     0
            gptid/ea2cefdb-6de8-11e5-89c5-00259098d9fa  ONLINE       0     0     0
            gptid/ea902aa6-6de8-11e5-89c5-00259098d9fa  ONLINE       0     0     0
            gptid/eaf359e0-6de8-11e5-89c5-00259098d9fa  ONLINE       0     0     0
            gptid/eb5a72d9-6de8-11e5-89c5-00259098d9fa  ONLINE       0     0     0

errors: No known data errors

-- End of daily output --

 

[anodos]

I would say da10 is pining for the fjords / joined the choir invisible.

 

[BamBamm]

LOL, well they are SeaCrap drives...

 

[Mirfster]

Should I just restart my server and see if it doesn't clear up?

Nope, need to replace that drive. Be glad that you are running RaidZ2 since you can withstand 2 drive failures in your vdev. But I would not suggest waiting around on getting a replacement drive in there.

 

[anodos]

LOL, well they are SeaCrap drives...

Since it's a constellation drive, it might still be under warranty (I think those get 5 years). You can contact seagate for a replacement. Just make sure you follow the right procedures for removing / replacing the drive.

 

[BamBamm]

Nope, need to replace that drive.

How do I know what drive needs to be replaced?

You can contact seagate for a replacement.

Screw that, they came with the system. I would rather go without...
I have a few backup drives, I will use for now. I thought I would get more than 3 months out of these, guess not. Time to invest into the "Red" zone! ;)

 

[Mirfster]

How do I know what drive needs to be replaced?

1. Look under [Storage] - [Volume Status] to see which drive has failed
2. Obtain the Serial Number from [Storage] - [View Disks], then match it to the failed drive in your system. Most of us here already keep track of the drive serial numbers and their physical locations just in case of an event like this.

This is an example of an older one I kept (was a little bit overkill with the info, but eh...):

Edit: Wanted to add additional info to look under [Storage] - [Volume Status] first..

 

[BamBamm]

Thank you.

 

[Mirfster]

NP, if you are not already doing so; you may want to get routine SMART checks going on as well (with e-mail notifications). /Condolences on the Seagates... ;)

 

[anodos]

NP, if you are not already doing so; you may want to get routine SMART checks going on as well (with e-mail notifications). /Condolences on the Seagates... ;)

I haven't seen any articles complaining about the reliability of seagate constellation drives. I would check the SMART output of my other drives just to make sure everything is on the up-and-up.

 

[BamBamm]

I have SMART running twice a week and this is the ONLY error it has ever reported, everything else has been great.

 

[anodos]

I have SMART running twice a week and this is the ONLY error it has ever reported, everything else has been great.

Great. Do you also have it configured to monitor drive temperatures? You might also want to verify that you're drives aren't running hot.

 

[Mirfster]

I haven't seen any articles complaining about the reliability of seagate constellation drives.

True, I am just 'ascared of Seagate in general (funny because I really like Samsung SSDs...)

 

[BamBamm]

Do you also have it configured to monitor drive temperatures?

No, I don't know how, and I don't know what the other options are either (APM, A. level, etc.)
However, it shouldn't be overheating at all, this server is in a cement basement. The temperature down there in the winter is around 45 - 50 degrees.
During summer, the a/c keeps the temperature around 55 - 65. I keep the unit clean and dust free as well.

 

[anodos]

No, I don't know how, and I don't know what the other options are either (APM, A. level, etc.)
However, it shouldn't be overheating at all, this server is in a cement basement. The temperature down there in the winter is around 45 - 50 degrees.
During summer, the a/c keeps the temperature around 55 - 65. I keep the unit clean and dust free as well.

View attachment 10399

You configure temperature reporting under "services" -> "S.M.A.R.T.". FYI, the webgui errors you have above should have spammed your email inbox. This is a good chance to make sure that your email reporting worked properly. :D

 

[BamBamm]

The webgui errors you have above should have spammed your email inbox.

I was on the server last night (I check it manually about twice a week) and there was no issues.
As of 10 AM CST this morning, I had two or three emails from the server, one of which I couldn't post here because it was over the 30k character limit.

Configure temperature reporting under "services" -> "S.M.A.R.T."

Thank you, I set it at 32 / 35.