Something overheating - can't tell what

[MikeyG]

Last night I got a bunch of these in my log:

Code:

Oct 18 07:32:13 nas mpr0: Current Temp in Celsius: 106
Oct 18 07:33:13 nas mpr0: Temperature Threshold flags 0        exceeded for Sensor: 0 !!!
Oct 18 07:33:13 nas mpr0: Current Temp in Celsius: 106
Oct 18 07:34:13 nas mpr0: Temperature Threshold flags 0        exceeded for Sensor: 0 !!!
Oct 18 07:34:13 nas mpr0: Current Temp in Celsius: 106
Oct 18 07:35:13 nas mpr0: Temperature Threshold flags 0        exceeded for Sensor: 0 !!!
Oct 18 07:35:13 nas mpr0: Current Temp in Celsius: 106

Pretty sure I've got no disks hitting temperatures of 106C. I've got an LSI 9305-24i that seems to get very hot though. Is that what mpr0 refers to? If so, I can't find a way to check current temperature or how to access current temp of sensor 0. IPMI for X470D4U doesn't seem to have anything in the sensors section.

I know for sure CPU doesn't go above about 70C at full load, and it would shut down around 90C anyway. I also have a Chelsio 10gb card, I think the 520 which gets very warm, but I'd be surprised if that was it.

Any ideas?

 

[Jailer]

It's your HBA. Get some airflow over it to cool it down, that's pretty hot.

 

[MikeyG]

That's what I was afraid of so thank you for confirming. Any idea how to access that temperature instead of waiting for it to trip the alert?

 

[Jailer]

Any idea how to access that temperature instead of waiting for it to trip the alert?

It may be able to check via IPMI.

 

[MikeyG]

Would you happen to know how specifically? I can't find a tool for checking HBA temp anywhere. "ipmi sensor list all" does not do it. But somehow FreeNAS is getting alerts, so there must be some way to get that information.