Some HDDs does not show up in web ui but in shell

Enderbonbon

Cadet
Joined
May 3, 2023
Messages
1
Hello ! It's my 1st post on this forum.
I have got a Server from a friend of mine and wanted to try true nas i have test the
hardware with windows 10 an all worked perfectly then i install true nas scale 22.12.2 on it all worked normal except for the point that i didn't saw all the drives i installed it an everything works except for the point that the web ui didn't show 1 of the 450 gb seagate drives and the 249 gb drive from samsung (the drives should have no Data on them because i formatet all of them on windows). But if i go in to the schell and type sudo lshw -class disk i can see all of the drives.




System details list
Motherboard/INTEL S3420GP LGA1156 ATX Server Board
CPU /intel xeon x3430
RAM quantity/16gb ddr3 4X4gb
Boot drive 120gb ssd from micron
Drives/ 5 HDDs 2*450 gb Seagate SaS drives 2*600 gb Seagate SaS drives
1*249gb sata drive from samsung
Hard disk controllers 1* HP RAID-Controller 4-CH SAS PCI-E - 433906-001 SAS3041E(conectet to the 4 seagate drives)
1*LSI MR SAS 9260-4i 4-CH 512MB SAS 6G PCI-E - L3-25121-86C(conectet to the samsung drive)
 
Top